ECO mode NISSAN PULSAR 2020 User Guide

Page 83 of 217



> (GLW   0RGHO &$@
3-10
Pre-driving checksandadjustments
. When theIntelligent Keyisplaced insideof
the glove box.
. When theIntelligent Keyisplaced insideof
the door pockets.
. When theIntelligent Keyisplaced insideor
near metallic materials.
The lockout protection mayfunction whenthe
Intelligent Keyisoutside thevehicle butistoo
close tothe vehicle.
Unlocking doors
GUID-4C06 CE36-CA33- 4E53-96FA-D9242916BE3F
1. Carry theIntelligent Key with you.
2. Push thedoor handle request switch(driver's or
front passenger's)
*
A
or back doorrequest
switch
*
B
.
3. Alldoors andtheback doorwillbeunlocked.
If adoor handle ispulled whileunlocking thedoors,
that door maynotbeunlocked. Returning thedoor
handle toits original position willunlock thedoor. Ifthe
door does notunlock, afterreturning thedoor handle,
push thedoor handle request switchtounlock the
door.
Automatic relock:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
All doors willbelocked automatically unlessoneofthe
following operations isperformed within30seconds
after pushing therequest switchwhilethedoors are
locked.
. Opening anydoors.
. Pushing theignition switch.
If during thepreset timeperiod theªUNL OCKº
button onthe Intelligent Key ispushed, alldoors willbe
locked automatically afterthenext preset time.
Opening backdoor
GUID-0CD2 99CD-0286- 4C11-B0AF- 3E552439AB7 7
1. Carry theIntelligent Key .
2. Push theback dooropener switch
*
c
.
3. The back doorwillunlock andopen.
BA TTER YSA VER SYSTEM
GUID-BC8 51CDF-ADC2 -4B42-AAD2-6 DB445A0AC51
When allthe following conditions aremet foraperiod
of time, thebattery saversystem willcutoffthe power
supply toprevent batterydischarge.
. The ignition switchisin the ªACCº position, and
. Alldoors areclosed, and
. The shift lever isin the ªPº (Park) position
(Continuously Variable Transmission models).
W ARNING ANDAUDIBLE REMINDERS
GUID-F1 838F66-C4 36-4050-91 6F-4C2899FC2471
The Intelligent Key system isequipped withafunction
that isdesigned tominimize improper operations ofthe
Intelligent Key and tohelp prevent thevehicle from
being stolen. Achime orbeep sounds insideand
outside thevehicle andawarning lightilluminates or
blinks.
See thetroubleshooting guideonthe next page and
ªW arning/indicator lightsandaudible remindersº (P.2-
11) .
Intelligent Key system warning light:
P position selecting warninglight:
(Continuously
V ariable Transmission models)
CAUTION:
When thechime orbeep sounds orthe warning
light illuminates orblinks, besure tocheck both
the vehicle andtheIntelligent Key.
&RQGLWLRQ

Page 84 of 217



> (GLW   0RGHO &$@
TROUBLESHOO TINGGUIDE
GUID-5A178 2C3-C48A-416C-BE3D-7 DD3A7E9F25E
Symptom Possible cause Actiontotake
When pushing theignition switchtostop
the engine The
Pposition selecting warninglightin
the meter illuminates andtheinside
warning chimesounds forafew seconds
(Continuously Variable Transmission
models) . The
shift lever isnot inthe ªPº (Park)
position. Shift
theshift lever tothe ªPº (Park)
position.
When shifting theshift lever tothe P
(Park) position (Continuously Variable
T ransmission models). The
inside warning chimesounds fora
few seconds. The
ignition switchisin the ªACCº or
ªONº position. Push
theignition switchtothe ªOFFº
position.
When opening thedriver's doortoget
out ofthe vehicle The
inside warning chimesounds con-
tinuously . The
ignition switchisin the ªACCº
position. Push
theignition switchtothe ªOFFº
position.
When closing thedoor aftergetting out
of the vehicle The
Intelligent Key system warning light
in the meter blinks inyellow ,the outside
chime sounds 3times andtheinside
warning chimesounds forafew seconds. The
ignition switchisin the ªACCº or
ªONº position. Push
theignition switchtothe ªOFFº
position.
The Pposition selecting warninglightin
the meter illuminates andtheoutside
chime sounds continuously (Continu-
ously Variable Transmission models).The
ignition switchisin the ªACCº or
ªOFFº position andtheshift lever isnot in
the ªPº (Park) position. Move
theshift lever tothe ªPº (Park)
position andpush theignition switchto
the ªOFFº position.
When pushing therequest switchorthe
ªL OCKº
button onthe Intelligent
K ey tolock thedoor The
outside chimesounds forafew
seconds andallthe doors unlock. The
Intelligent Key isinside thevehicle or
luggage room. Carry
theIntelligent Key with you.
When closing thedoor withtheinside
lock knob turned toªLOCKº The
outside chimesounds forafew
seconds andallthe doors unlock. The
Intelligent Key isinside thevehicle or
luggage room. Carry
theIntelligent Key with you.
When pushing thedoor handle request
switch tolock thedoor The
outside chimesounds forafew
seconds. The
Intelligent Key isinside thevehicle or
luggage room. Carry
theIntelligent Key with you.
A door isnot closed securely . Closethedoor securely .
The door handle request switchis
pushed beforethedoor isclosed. Push
thedoor handle request switchafter
the door isclosed.
When pushing theignition switchtostart
the engine The
Intelligent Key system warning light
in the meter blinks ingreen. The
battery charge islow . Replace
thebattery withanew one. (See
ªIntelligent Key batteryº (P.8-20) .)
The Intelligent Key system warning light
in the meter blinks inyellow andthe
inside warning chimesounds forafew
seconds. The
Intelligent Key isnot inthe vehicle. CarrytheIntelligent Key with you.
Pre-driving checksandadjustments
3-11
&RQGLWLRQ

Page 95 of 217



> (GLW   0RGHO &$@
4-2
Heater andairconditioner ,and audio system
GUID-EB 68331A-AB52 -4043-829E-CC3572E DA3B3
WARNING:
. Donot adjust theheater andairconditioner
controls oraudio controls whiledriving so
that fullattention maybegiven tovehicle
operation.
. Ifyou noticed anyforeign objects entering
the system hardware, spilledliquidonthe
system, ornoticed smokeorfumes coming
out from thesystem, orany other unusual
operation isobserved, stopusing thesystem
immediately andcontact thenearest
NISSAN dealer.Ignoring suchconditions
may lead toan accident, fireorelectric
shock.
. Donot disassemble ormodify thissystem. If
you do,itmay lead toan accident, fire,or
electric shock.
CAUTION:
Do not use thesystem whentheengine isnot
running forextended periodsoftime toprevent
battery discharge.
GUID-10AFA7C1-CB91-4B5B-9B CE-890B3A9C63E0
When theshift lever isshifted intotheªRº (Reverse)
position, themonitor displayshowsarearward view
from thevehicle.
The system isdesigned asan aid tothe driver in
situations suchasslot parking orparallel parking.
Designs anditems displayed onthe screen mayvary
depending onthe models.
WARNING:
. The Rearview Monitorisaconvenience butit
is not asubstitute tocheck behind the
vehicle whenbacking up.The driver is
always responsible forsafety during parking
and other manoeuvres.
. Objects viewedinthe Rearview Monitor
differ fromactual distance becauseawide-
angle lensisused. Objects inthe Rearview
Monitor willappear visually opposite like
ones viewed inthe inside andoutside
mirrors.
. Make surethattheback doorissecurely
closed whenbacking up.
. Underneath thebumper andthecorner
areas ofthe bumper cannotbeviewed on
the Rearview Monitorbecause ofits mon-
itoring rangelimitation.
. Donot putanything onthe Rearview cam-
era.
. The Rearview cameraisinstalled abovethe
license plate.
. When washing thevehicle withhigh-pres-
sure water, besure nottospray itaround the
camera. Otherwise, watermayenter the
camera unitcausing watercondensation on
the lens, amalfunction, fireoran electric shock.
. Donot strike thecamera. Itis aprecision
instrument. Otherwise,itmay malfunction or
cause damage resulting inafire oran
electric shock.
CAUTION:
Do not scratch thecamera lenswhen cleaning
dirt orsnow fromthelens.
HOW TO READ THEDISPLA YEDLINES
GUID-B9 963594-2 D85-4A0D-B2 98-9AF6F 289A0F5
SAA2776
Guide lineswhich indicate thevehicle widthand
distances toobjects withreference tothe bumper line
*
A
are displayed onthe monitor.
Distance guidelines:
Indicate distances fromthevehicle body.
. Red line
*
1
: approx. 0.5m(1.5 ft)
. Yellow line
*
2
: approx. 1m (3 ft)
. Green line
*
3
: approx. 2m (7 ft)
. Green line
*
4
: approx. 3m (10 ft)
SAFETY PRECAUTI ONS REARVIEWMONITOR(ifequippe d)
&RQGLWLRQ

Page 97 of 217



> (GLW   0RGHO &$@
4-4
Heater andairconditioner ,and audio system
Backing upbehind aprojecting object
GUID-817 A4BD2-22E E-4EC4-B3D3 -1D69559 88858
JVH0418X
The position
*
C
is shown furtherthantheposition
*
B
in the display .However, theposition
*
C
is actually at
the same distance asthe position
*
A
. The vehicle
may hitthe object whenbacking uptothe position
*
A
if the object projects overtheactual backing up
course.
HOW TO ADJUST THESCREEN
GUID-509 CFCEC-CEF 2-42AA-B299-44572B2 17738
Models withnavigation system:
Guide lines:
Guide linedisplay canbeturned onand offbypushing
the CAMERA button.
Display adjustments:
For operations toadjust thescreen display settings
including brightness, language,etc.,seetheseparately
provided NISSANConnect Owner'sManual.
Models without navigation system:
Brightness, ContrastandLanguage ofthe messages
on the Rearview Monitorscreencanbeadjusted.
1. Push theENTER/SETTING buttonwhilethe
Rearview Monitorscreenisdisplayed. Eachtime
the ENTER/SETTING buttonispushed, thenext
setting itemisselected.
2. Turn theTUNE´FOLDER controlknobtoadjust the
setting ofthe item.
3. Push theENTER/SETTING buttontocomplete
the setting adjustment.
4. Push ENTER/SETTING buttonagaintoselect the
next setting item.
Setting adjustment modewillend ifthe ENTER/
SETTING buttonispushed whilethelast setting item
is selected, ifthe BACK button ispushed orifthe
screen isleft without operation forsome time.
NO TES
GUID-CDAC 01D7-4D60-4ABD-AC3 3-DB65BFB27E34
. When theview isswitched, thedisplay images on
the screen maybedisplayed withsome delay.
. When thetemperature isextremely highorlow ,
the screen maynotclearly display objects. Thisis
not amalfunction.
. When strong lightisdirectly coming onthe
camera, objectsmaynotbedisplayed clearly.
This isnot amalfunction.
. Vertical linesmaybeseen inobjects onthe
screen. Thisisdue tostrong reflected lightfrom
the bumper. Thisisnot amalfunction.
. Thescreen mayflicker underfluorescent light.This
is not amalfunction.
. Thecolors ofobjects onthe Rearview Monitormay
differ somewhat fromtheactual colorofobjects.
This isnot amalfunction.
. Objects onthe monitor maynotbeclear inadark
environment. Thisisnot amalfunction.
. Ifdirt, rainorsnow accumulates onthe camera,
the Rearview Monitormaynotdisplay objects
clearly .Clean thecamera.
. Donot use alcohol, benzineorthinner toclean the
camera. Thiswillcause discoloration. To clean the
camera, wipewithacloth dampened withdiluted
mild cleaning agentandthen wipe withadry cloth.
. Donot damage thecamera asthe monitor screen
may beadversely affected.
. Donot use wax onthe camera window.Wipe off
any wax with aclean clothdampened withmild
detergent dilutedwithwater.
&RQGLWLRQ

Page 99 of 217



> (GLW   0RGHO &$@
4-6
Heater andairconditioner ,and audio system
GUID-D6D 9F812-CB78-4 FA4-ADF1 -EACDF07131 0D
WARNING:
. Never leavechildren oradults whowould
normally requirethesupport ofothers alone
in the vehicle. Petsshould notbeleft alone
either. Theycould unknowingly activate
switches orcontrols andinadvertently be-
come involved inaserious accident and
injure themselves. Onhot, sunny days,
temperatures inaclosed vehicle could
quickly become highenough tocause se-
vere orpossibly fatalinjuries topeople or
animals.
. Donot use therecirculation modeforlong
periods asitmay cause theinterior airto
become staleandthewindows tofog up.
. Donot adjust theheating andaircondition-
ing controls whiledriving sothat fullatten-
tion may begiven tovehicle operation.
The heater andairconditioner operatewhenthe
engine isrunning. Theairblower willoperate evenif
the engine isturned offand theignition switchisin the
ªONº position.
NO TE:
. Odors frominside andoutside thevehicle
can build upinthe airconditioner unit.Odor
can enter thepassenger compartment
through thevents.
. When parking, setthe heater andaircondi-
tioner controls toturn offairrecirculation to
allow freshairinto thepassenger compart-
ment. Thisshould helpreduce odorsinside
the vehicle.
OPERA TINGTIPS(forautomatic aircondi-
tioner)
GUID-16D CCDD4-D6 9F-42A3-BE 18-3ABDA 970B57C
JVH0067X
JVH0063X
Left-Hand Drive(LHD) model*
*: The illustration isfor the Left-Hand Drive(LHD)
model. FortheRight-Hand Drive(RHD) model, the
layout willbethe opposite.
When theengine coolant temperature andoutside air
temperature arelow,the airflow from thefoot outlets
may notoperate. However, thisisnot amalfunction.
After thecoolant temperature warmsup,the airflow
from thefoot outlets willoperate normally.
The sensors
*
1
and
*
2
, located onthe instrument
panel, helpmaintain aconstant temperature. Donot put
anything onoraround thesensors.
HEA TER AND AIRCONDIT IONER
&RQGLWLRQ

Page 101 of 217



> (GLW   0RGHO &$@
4-8
Heater andairconditioner ,and audio system
Defrosting ordefogging:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode directs theairtothe defogger outletsto
defrost/defog thewindows.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe desired
position between themiddle andthehot (right)
position.
. To remove frostfromtheoutside surfaceofthe
windshield quickly,turn thetemperature control
dial tothe maximum hotposition andthefan
speed control ª
º dial tomaximum position.
. Ifit is difficult todefog thewindshield, turnthe
ª A/Cº button on.
Bi-level heating:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode directs coolairfrom theside andcenter
ventilators andwarm airfrom thefoot outlets. When
the temperature controldialisturned tothe maximum
hot orcool position, theairbetween theventilators and
the foot outlets isthe same temperature.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe desired
position. Heating
anddefogging:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode heatstheinterior anddefogs thewindows.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe maximum
hot (right) position.
5. Push theªA/Cº button on.(The ªA/Cº indicator
light willilluminate.)
Air conditioner operation
GUID-D4 7C17DA-AC3 0-4F0E-ADA4 -8C2DE01347BA
The airconditioner systemshouldbeoperated for
approximately 10minutes atleast once amonth. This
helps prevent damage tothe airconditioner system
due tothe lack oflubrication.
Cooling:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode isused tocool anddehumidify theair.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Push theªA/Cº button on.(The ªA/Cº indicator
light willilluminate.)
5. Turn thetemperature controldialtothe desired
position between themiddle andthecool (left)
position.
A visible mistmaybeseen coming fromtheventilators
in hot, humid conditions asthe airiscooled rapidly.
This does notindicate amalfunction. Dehumidified
heating:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode isused toheat anddehumidify theair.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Push theªA/Cº button on.(The ªA/Cº indicator
light willilluminate.)
5. Turn thetemperature controldialtothe desired
position between themiddle andthehot (right)
position.
Dehumidified defogging:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode isused todefog thewindows and
dehumidify theair.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Push theªA/Cº button on.(The ªA/Cº indicator
light willilluminate.)
5. Turn thetemperature controldialtothe desired
position.
&RQGLWLRQ

Page 102 of 217



> (GLW   0RGHO &$@
AUT OMA TICAIR CONDITIONER
GUID-EEDAB BD4-5460-4E74-8DA 6-F18F780C 0A98
JVH0053X
* The switch layoutinthe illustration isfor the Left-
Hand Drive(LHD) model. FortheRight-Hand Drive
(RHD) model, theswitch layoutwillbethe opposite.
1. Temperature controlbuttons (driverside)
2. ª
º rear defogger button(SeeªDefogger
switchº (P.2-21) .)
3. ª
º front defogger button
4. Display screen
5. ª
º Air recirculation button
6. ª
º Outside aircirculation button
7. Temperature controlbuttons (passenger side)
8. ªON´OFFº button
9. ªAUT Oºbutton
10. ª
º fan speed control button
11. ªMODEº button
12. ªA/Cº (AirConditioner) button
13. ªDUAL ºzone control ON/OFF button
Automatic operation(AUTO)
GUID-3C17 66E6-9820-4047-AC2F-4 76AFCB48C8B
The AUTOmode maybeused year-round asthe
system automatically controlstheairconditioner toa
constant temperature, airflow distribution andfan
speed afterthedesired temperature isset manually .
T o turn theheater andairconditioner onoroff, push
the ªON´OFFº button.
Cooling anddehumidified heating:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
1. Push theªAUT Oºbutton (theAUTOindicator light
will illuminate) .
2. Ifthe A/C indicator lightisnot illuminated, push
the ªA/Cº button (theA/C indicator lightwill
illuminate) .
3. Push thetemperature controlbuttons

º and
ª
º) to set the desired temperature.
.
When theDUAL indicator lightisnot illumi-
nated, pushing theªAUT Oºbutton (theAUTO
indicator lightwillilluminate) changesboththe
driver andpassenger sidetemperature.
.
When theDUAL indicator lightisnot illumi-
nated, pushing theªDUAL ºbutton (theDUAL
indicator lightwillilluminate) allowstheuser to independently
changethedriver andpassen-
ger side temperatures withthecorresponding
temperature controlbuttons (ª
º and
ª
º) .
.
T o cancel theseparate temperature setting,
push theªDUAL ºbutton (theDUAL indicator
light willturn off)and thedriver's side
temperature settingwillbeapplied toboth
the driver andpassenger sides.
4. Push either theoutside aircirculation ª
º
button orthe airrecirculation ª
º button (the
button withanindicator lightilluminated) for
approximately 2seconds toswitch tothe auto-
matic airintake control mode(theindicator light
will blink twice) .
A visible mistmaybeseen coming fromtheventilators
in hot, humid conditions asthe airiscooled rapidly.
This does notindicate amalfunction.
Heating (A/Coff):
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
1. Push theªAUT Oºbutton (theAUTOindicator light
will illuminate) .
2. Ifthe ªA/C indicator lightisilluminated, pushthe
ª A/Cº button (theA/C indicator lightwillturn off).
3. Push thetemperature controlbuttons (ª
º and
ª
º) to set the desired temperature.
.
When theDUAL indicator lightisnot illumi-
nated, pushing theªAUT Oºbutton (theAUTO
indicator lightwillilluminate) changesboththe
driver andpassenger sidetemperature.
.
When theDUAL indicator lightisnot illumi-
nated, pushing theªDUAL ºbutton (theDUAL
indicator lightwillilluminate) allowstheuser to
independently changethedriver andpassen-
ger side temperatures withthecorresponding
temperature controlbuttons (ª
º and
Heater andairconditione r,and audio system
4-9
&RQGLWLRQ

Page 103 of 217



> (GLW   0RGHO &$@
4-10
Heater andairconditione r,and audio system
ª
º) .
.
T o cancel theseparate temperature setting,
push theªDUAL ºbutton (theDUAL indicator
light willturn off)and thedriver's side
temperature settingwillbeapplied toboth
the driver andpassenger sides.
. Donot setthe temperature lowerthantheoutside
air temperature. Doingsomay cause thetem-
perature tonot becontrolled properly.
. Ifthe windows fogup,use dehumidified heating
instead ofthe A/C offheating.
Dehumidified defrosting/defogging:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
1. Push thefront defogger ª
º button (theª
º
indicator lightwillilluminate) .
2. Push thetemperature controlbuttons (ª
º and
ª
º) to set the desired temperature.
. To quickly remove frostfromtheoutside surfaceof
the windshield, setthe temperature controland
the fanspeed tothe maximum levels.
. After thewindshield iscleared, pushtheªAUT Oº
button again(theAUTOindicator lightwillturn
off) .
. When thefront defogger ª
º button ispushed,
the airconditioner willautomatically turnonto
defog thewindshield ifthe outside temperature is
above -28C. Ifthe airrecirculation modeisturned
on atthe time, theventilation willchange fromthe
air recirculation modetothe outside aircirculation
mode toimprove thedefogging performance.
Do not setthe temperature toolow when thefront
defogger modeison (the ª
º indicator lightis
illuminated) ,because doingsomay fogupthe
windshield.
Manual operation
GUID-729 4676B-E04 5-4948-935 6-7E8823822C9D
The manual modecanbeused tocontrol theheater
and airconditioner toyour desired settings.
T o turn offthe heater andairconditioner, pushthe
ªON´OFFº button.
Fan speed control:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Push thefanspeed control ª
º button (+ side or

Page 105 of 217



> (GLW   0RGHO &$@
4-12
Heater andairconditione r,and audio system
. Ifthe CD cannot beplayed, oneofthe following
messages willbedisplayed.
Error CD:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
. Confirm thattheCD isinserted correctly (thelabel
side isfacing up,etc.) .
. Confirm thattheCD isnot bent orwarped anditis
free ofscratches.
. Confirm thatthedisc isaCD and notaDVD.
. Confirm thatthedisc contains audiofiles.
Eject CD:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This isamalfunction duetothe temperature insidethe
player istoo high. Remove theCD bypushing the
EJECT button, andafter ashort timereinsert theCD.
The CDcan beplayed whenthetemperature ofthe
player returns tonormal.
WARNING:
Do not adjust theaudio system whiledriving.
The audio system operates whentheignition switchis
in the ªACCº orªONº position. Ifyou want tolisten to
the radio orCD while theengine isnot running, turn
the ignition switchtothe ªACCº position. Donot use
for anextended periodoftime withtheengine
stopped.
USB (Universal SerialBus)(ifequipped)
GUID-C92 63E7B-31BF -4CE4-BACA -6A31CCA69 271
WARNING:
Do not connect, disconnect oroperate theUSB
device whiledriving. Doingsocan beadistrac-
tion. Ifdistracted youcould losecontrol ofyour
vehicle andcause anaccident orserious injury.
CAUTION:
. Donot force theUSB device intotheUSB
port. Inserting theUSB device tiltedorup-
side-down intotheport may damage the
port. Make surethattheUSB device is
connected correctlyintotheUSB port.
. Donot grab theUSB portcover (ifequipped)
when pulling theUSB device outofthe port.
This could damage theport andthecover.
. Donot leave theUSB cable inaplace where
it can bepulled unintentionally. Pullingthe
cable maydamage theport.
The vehicle isnot equipped withaUSB device. USB
devices shouldbepurchased separatelyasnecessary .
This system cannotbeused toformat USBdevices. To
format aUSB device, useapersonal computer.
In some states/area, theUSB device forthe front seats
plays onlysound without imagesforregulatory
reasons, evenwhen thevehicle isparked.
This system supports variousUSBmemory devices,
USB harddrives andiPod players. SomeUSBdevices
may notbesupported bythis system.
. Partitioned USBdevices maynotbeplayed
correctly .
. Some characters usedinother languages (Chi-
nese, Japanese, etc.)arenot displayed properly
on display .Using English language characters
with aUSB device isrecommended.
General notesforUSB use:
Refer toyour device manufacturer's ownerinformation
regarding theproper useand care ofthe device. Notes
foriPod use:
iP od isatrademark ofApple Inc.,registered inthe U.S.
and other countries.
. Improperly plugginginthe iPod may cause a
checkmark tobe displayed onand off(flickering) .
Always makesurethattheiPod isconnected
properly .
. AniPod nano (1stGeneration) mayremain infast
forward orrewind modeifit is connected duringa
seek operation. Inthis case, please manually reset
the iPod.
. AniPod nano (2ndGeneration) willcontinue to
fast-forward orrewind ifit is disconnected during
a seek operation.
. Anincorrect songtitlemay appear whenthePlay
Mode ischanged whileusing aniPod nano (2nd
Generation)
. Audiobooks maynotplay inthe same orderas
they appear onaniPo d.
. Large videofilescause slowresponses inan iPod.
The vehicle centerdisplay maymomentarily black
out, butwillsoon recover.
. Ifan iPodautomatically selectslargevideo files
while inthe shuffle mode,thevehicle center
display maymomentarily blackout,butwillsoon
recover.
Compact Disc/USB memorywithMP3 or
WMA (ifequipped)
GUID-CD9 6BDCB-91C E-4EBD-989E-265CB8B6578E
T erms:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
. MP3 ÐMP3 isshort forMoving Pictures Experts
Group AudioLayer3.MP3 isthe most wellknown
compressed digitalaudiofileformat. Thisformat
allows fornear ªCDqualityº sound,butata
fraction ofthe size ofnormal audiofiles.MP3
conversion ofan audio trackfromCDcan reduce
&RQGLWLRQ

Page 109 of 217


 
> (GLW   0RGHO &$@
4-16
Heater andairconditione r,and audio system
T roubleshooting guide(models withoutcolordisplay) :
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Symptom CauseandCountermeasure
Cannot play Check
ifthe disc wasinserted correctly.
Check ifthe disc isscratched ordirty .
Check ifthere iscondensation insidetheplayer, andifthere is,wait until thecondensation isgone (about 1hour) before usingthe
player.
If there isatemperature increaseerror,theCD player willplay correctly afteritreturns tothe normal temperature.
If there isamixture ofmusic CDfiles (CD-DA data)andMP3/WMA/AAC filesonaCD, only themusic CDfiles (CD-DA data)willbe
played.
Files withextensions otherthanª.MP3º ,ª.WMA º, ª.mp3º orª.wmaº cannotbeplayed. Inaddition, thecharacter codesandnumber of
characters forfolder names andfilenames should beincompliance withthespecifications.
Check ifthe disc orthe fileisgenerated inan irregular format.Thismayoccur depending onthe variation orthe setting ofMP3/WMA
writing applications orother textediting applications.
Check ifthe finalisation process,suchassession closeanddisc close, isdone forthe disc.
Check ifthe disc isprotected bycopyright.
P oor sound quality Checkifthe disc isscratched ordirty .
It takes arelatively longtimebefore
the music startsplaying. If
there aremany folder orfile levels onthe MP3/WMA disc,some timemayberequired beforethemusic startsplaying.
Music cutsofforskips The
writing software andhardware combination mightnotmatch, orthe writing speed, writingdepth,writing width,etc.,might not
match thespecifications. Try using theslowest writingspeed.
Skipping withhigh bitrate files Skippingmayoccur withlarge quantities ofdata, suchasfor high bitrate data.
Move immediately tothe next song
when playing. When
anon-MP3/WMA filehas been given anextension ofª.MP3º ,ª.WMA º, ª.mp3º orª.wmaº orwhen playisprohibited by
copyright protection, theplayer willskip tothe next song.
The songs donot play back inthe
desired order. The
playback orderisthe order inwhich thefiles were written bythe writing software, sothe files might notplay inthe desired order.
&RQGLWLRQ

Page:   < prev 1-10 11-20 21-30 31-40 41-50 51-60 ... 70 next >