audio NISSAN PULSAR 2020 User Guide


> (GLW   0RGHO &$@
4 Heater andairconditioner, andaudio system
Safety precautions ....
....................................... ............................................ 4-2
Rearview Monitor(ifequipped) ....
................................................. ..........4-2
How toread thedisplayed lines....
................................................... 4-2
Difference betweenpredictive andactual distances ....
............... 4-3
How toadjust thescreen ....
................................................. ..............4-4
Notes ....
....................................... ............................................................. 4-4
V entilators ....
...................................................... ............................................4-5
Center ventilators ....
................................................................ ..............4-5
Side ventilators ....
................................................................ ..................4-5
Rear ventilators (ifequipped) ....
........................................................ 4-5
Heater andairconditioner ....
...................................................... ..............4-6
Operating tips(forautomatic airconditioner) ....
........................... 4-6
Manual airconditioner ....
........................................................... ..........4-7
Automatic airconditioner ....
...................................................... ..........4-9
Servicing airconditioner .................................................................. 4-10Audio
system ....
................................................................ ........................4-11
Audio operation precautions ....
.................................................... 4-11
Antenna ....
................................................. .........................................4-18
FM-AM radiowithCompact Disc(CD) player ....
.................... 4-19
FM-AM radiowithCompact Disc(CD) player (with
color display) ....
....................................... ......................................... 4-22
CD/USB memorycareandcleaning ....
...................................... 4-27
Audio control steering switch(ifequipped) ....
......................... 4-28
USB/AUX connector(modelswithnavigation system)....
..... 4-28
Car phone orCB radio ....
........................................................... ...........4-29
Bluetooth


> (GLW   0RGHO &$@
4-2
Heater andairconditioner ,and audio system
GUID-EB 68331A-AB52 -4043-829E-CC3572E DA3B3
WARNING:
. Donot adjust theheater andairconditioner
controls oraudio controls whiledriving so
that fullattention maybegiven tovehicle
operation.
. Ifyou noticed anyforeign objects entering
the system hardware, spilledliquidonthe
system, ornoticed smokeorfumes coming
out from thesystem, orany other unusual
operation isobserved, stopusing thesystem
immediately andcontact thenearest
NISSAN dealer.Ignoring suchconditions
may lead toan accident, fireorelectric
shock.
. Donot disassemble ormodify thissystem. If
you do,itmay lead toan accident, fire,or
electric shock.
CAUTION:
Do not use thesystem whentheengine isnot
running forextended periodsoftime toprevent
battery discharge.
GUID-10AFA7C1-CB91-4B5B-9B CE-890B3A9C63E0
When theshift lever isshifted intotheªRº (Reverse)
position, themonitor displayshowsarearward view
from thevehicle.
The system isdesigned asan aid tothe driver in
situations suchasslot parking orparallel parking.
Designs anditems displayed onthe screen mayvary
depending onthe models.
WARNING:
. The Rearview Monitorisaconvenience butit
is not asubstitute tocheck behind the
vehicle whenbacking up.The driver is
always responsible forsafety during parking
and other manoeuvres.
. Objects viewedinthe Rearview Monitor
differ fromactual distance becauseawide-
angle lensisused. Objects inthe Rearview
Monitor willappear visually opposite like
ones viewed inthe inside andoutside
mirrors.
. Make surethattheback doorissecurely
closed whenbacking up.
. Underneath thebumper andthecorner
areas ofthe bumper cannotbeviewed on
the Rearview Monitorbecause ofits mon-
itoring rangelimitation.
. Donot putanything onthe Rearview cam-
era.
. The Rearview cameraisinstalled abovethe
license plate.
. When washing thevehicle withhigh-pres-
sure water, besure nottospray itaround the
camera. Otherwise, watermayenter the
camera unitcausing watercondensation on
the lens, amalfunction, fireoran electric shock.
. Donot strike thecamera. Itis aprecision
instrument. Otherwise,itmay malfunction or
cause damage resulting inafire oran
electric shock.
CAUTION:
Do not scratch thecamera lenswhen cleaning
dirt orsnow fromthelens.
HOW TO READ THEDISPLA YEDLINES
GUID-B9 963594-2 D85-4A0D-B2 98-9AF6F 289A0F5
SAA2776
Guide lineswhich indicate thevehicle widthand
distances toobjects withreference tothe bumper line
*
A
are displayed onthe monitor.
Distance guidelines:
Indicate distances fromthevehicle body.
. Red line
*
1
: approx. 0.5m(1.5 ft)
. Yellow line
*
2
: approx. 1m (3 ft)
. Green line
*
3
: approx. 2m (7 ft)
. Green line
*
4
: approx. 3m (10 ft)
SAFETY PRECAUTI ONS REARVIEWMONITOR(ifequippe d)
&RQGLWLRQ


> (GLW   0RGHO &$@
V ehicle widthguide lines
*
5
:
Indicate thevehicle widthwhenbacking up.
NO TE:
For models withnavigation system,theguide
lines canbeturned onand offbypushing the
CAMERA button.
DIFFERENCE BETWEENPREDICTIVE AND
ACTUAL DISTANCES
GUID-A2C84 B41-3A67-489B-A2CE-15AA6870 9FD1
Backing uponasteep uphill
GUID-61 901F9C-7F A0-466D-B1D2-A606 D5F7827C
SAA1978
When backing upthe vehicle upahill, thedistance guide
linesandthevehicle widthguide linesareshown
closer thantheactual distance. Forexample, the
display shows1m (3 ft) tothe place
*
A
, but the
actual 1m (3 ft)distance onthe hillisthe place
*
B
.
Note thatanyobject onthe hillisviewed inthe monitor
further thanitappears.
Backing uponasteep downhill
GUID-D35 86A73-2C52-467E-94 F4-7B1E64A7 F1D5
SAA1979
When backing upthe vehicle downahill, thedistance
guide linesandthevehicle widthguide linesareshown
further thantheactual distance. Forexample, the
display shows1m (3 ft) tothe place
*
A
, but the
actual 1m (3 ft)distance onthe hillisthe place
*
B
. Note
thatanyobject onthe hillisviewed inthe monitor
closer thanitappears.
Backing upnear aprojecting object
GUID-8E9 3DA4C-AEC9 -4DC0-A420-8A75BE0D 107B
SAA3440
The vehicle mayseem tonearly cleartheobject inthe
display .However, thevehicle mayhitthe object ifit
projects overtheactual backing upcourse.
Heater andairconditione r,and audio system
4-3
&RQGLWLRQ


> (GLW   0RGHO &$@
4-4
Heater andairconditioner ,and audio system
Backing upbehind aprojecting object
GUID-817 A4BD2-22E E-4EC4-B3D3 -1D69559 88858
JVH0418X
The position
*
C
is shown furtherthantheposition
*
B
in the display .However, theposition
*
C
is actually at
the same distance asthe position
*
A
. The vehicle
may hitthe object whenbacking uptothe position
*
A
if the object projects overtheactual backing up
course.
HOW TO ADJUST THESCREEN
GUID-509 CFCEC-CEF 2-42AA-B299-44572B2 17738
Models withnavigation system:
Guide lines:
Guide linedisplay canbeturned onand offbypushing
the CAMERA button.
Display adjustments:
For operations toadjust thescreen display settings
including brightness, language,etc.,seetheseparately
provided NISSANConnect Owner'sManual.
Models without navigation system:
Brightness, ContrastandLanguage ofthe messages
on the Rearview Monitorscreencanbeadjusted.
1. Push theENTER/SETTING buttonwhilethe
Rearview Monitorscreenisdisplayed. Eachtime
the ENTER/SETTING buttonispushed, thenext
setting itemisselected.
2. Turn theTUNE´FOLDER controlknobtoadjust the
setting ofthe item.
3. Push theENTER/SETTING buttontocomplete
the setting adjustment.
4. Push ENTER/SETTING buttonagaintoselect the
next setting item.
Setting adjustment modewillend ifthe ENTER/
SETTING buttonispushed whilethelast setting item
is selected, ifthe BACK button ispushed orifthe
screen isleft without operation forsome time.
NO TES
GUID-CDAC 01D7-4D60-4ABD-AC3 3-DB65BFB27E34
. When theview isswitched, thedisplay images on
the screen maybedisplayed withsome delay.
. When thetemperature isextremely highorlow ,
the screen maynotclearly display objects. Thisis
not amalfunction.
. When strong lightisdirectly coming onthe
camera, objectsmaynotbedisplayed clearly.
This isnot amalfunction.
. Vertical linesmaybeseen inobjects onthe
screen. Thisisdue tostrong reflected lightfrom
the bumper. Thisisnot amalfunction.
. Thescreen mayflicker underfluorescent light.This
is not amalfunction.
. Thecolors ofobjects onthe Rearview Monitormay
differ somewhat fromtheactual colorofobjects.
This isnot amalfunction.
. Objects onthe monitor maynotbeclear inadark
environment. Thisisnot amalfunction.
. Ifdirt, rainorsnow accumulates onthe camera,
the Rearview Monitormaynotdisplay objects
clearly .Clean thecamera.
. Donot use alcohol, benzineorthinner toclean the
camera. Thiswillcause discoloration. To clean the
camera, wipewithacloth dampened withdiluted
mild cleaning agentandthen wipe withadry cloth.
. Donot damage thecamera asthe monitor screen
may beadversely affected.
. Donot use wax onthe camera window.Wipe off
any wax with aclean clothdampened withmild
detergent dilutedwithwater.
&RQGLWLRQ


> (GLW   0RGHO &$@
GUID-56 1C1B64-A1B B-40F1-AA9E -F43C26FE3339
CENTER VENTILATORS
GUID-C16C 9225-3735-455F-AFF6-7 C15D8857 951
JVH0293X
Open/close theventilators bymoving thecontrol in
either direction.
: This symbol indicates thattheventilators are
closed. Moving theside control inthis
direction willclose the
ventilators.
: This symbol indicates thattheventilators are
open. Moving theside control inthis
direction willopen theventilators.
Adjust theairflow direction ofthe ventilators bymoving
the center knob(up/down, left/right)untilthepreferred
position isachieved.
SIDE VENTILA TORS
GUID-284 A8689-F07 A-4411-B71 4-B69AB2B 6DC80
JVH0880X
Open/close theventilators bymoving thecontrol in
either direction.
: This symbol indicates thattheventilators are
closed. Moving theside control inthis
direction willclose theventilators.
: This symbol indicates thattheventilators are
open. Moving theside control inthis
direction willopen theventilators.
Adjust theairflow direction ofthe ventilators bymoving
the center knob(up/down, left/right)untilthepreferred
position isachieved.
REAR VENTILA TORS (ifequipped)
GUID-BD 5C6473-457 7-4142-8218-1FFB59 4E6FF7
SAA0564B
Open/close theventilators bymoving thecontrol to
either direction.
: This symbol indicates thattheventilators are
closed. Moving theside control tothis
direction willclose theventilators.
: This symbol indicates thattheventilators are
open. Moving theside control tothis
direction willopen theventilators.
Adjust theairflow direction ofthe ventilators bymoving
the center knob(up/down, left/right)untilthedesired
position isachieved.
Heater andairconditione r,and audio system
4-5
VENTILA
TORS
&RQGLWLRQ


> (GLW   0RGHO &$@
4-6
Heater andairconditioner ,and audio system
GUID-D6D 9F812-CB78-4 FA4-ADF1 -EACDF07131 0D
WARNING:
. Never leavechildren oradults whowould
normally requirethesupport ofothers alone
in the vehicle. Petsshould notbeleft alone
either. Theycould unknowingly activate
switches orcontrols andinadvertently be-
come involved inaserious accident and
injure themselves. Onhot, sunny days,
temperatures inaclosed vehicle could
quickly become highenough tocause se-
vere orpossibly fatalinjuries topeople or
animals.
. Donot use therecirculation modeforlong
periods asitmay cause theinterior airto
become staleandthewindows tofog up.
. Donot adjust theheating andaircondition-
ing controls whiledriving sothat fullatten-
tion may begiven tovehicle operation.
The heater andairconditioner operatewhenthe
engine isrunning. Theairblower willoperate evenif
the engine isturned offand theignition switchisin the
ªONº position.
NO TE:
. Odors frominside andoutside thevehicle
can build upinthe airconditioner unit.Odor
can enter thepassenger compartment
through thevents.
. When parking, setthe heater andaircondi-
tioner controls toturn offairrecirculation to
allow freshairinto thepassenger compart-
ment. Thisshould helpreduce odorsinside
the vehicle.
OPERA TINGTIPS(forautomatic aircondi-
tioner)
GUID-16D CCDD4-D6 9F-42A3-BE 18-3ABDA 970B57C
JVH0067X
JVH0063X
Left-Hand Drive(LHD) model*
*: The illustration isfor the Left-Hand Drive(LHD)
model. FortheRight-Hand Drive(RHD) model, the
layout willbethe opposite.
When theengine coolant temperature andoutside air
temperature arelow,the airflow from thefoot outlets
may notoperate. However, thisisnot amalfunction.
After thecoolant temperature warmsup,the airflow
from thefoot outlets willoperate normally.
The sensors
*
1
and
*
2
, located onthe instrument
panel, helpmaintain aconstant temperature. Donot put
anything onoraround thesensors.
HEA TER AND AIRCONDIT IONER
&RQGLWLRQ


> (GLW   0RGHO &$@
MANUAL AIRCONDITIONER
GUID-B9 F02A01-74 43-43F7-84E C-9EEBAFE5 A528
JVH0499X
1. Airintake lever(Outside aircirculation ª
º
/Air recirculation
ª
º)
2. Airflow control dial
3. Fanspeed control
ª
º dial
4. ªA/Cº (AirConditioner) button
5. Temperature controldial
6. Rear defogger
ª
º button (SeeªDefogger
switchº (P.2-21) .)
T o turn offthe heater andairconditioner, turnthefan
speed control ª
º dial tothe ªOFFº (0)position.
Controls
GUID-3B92B 3BB-498F-4734-93D4 -D381D317DF19
Outside aircirculation:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Move theairintake levertothe ª
º position. Theair
flow isdrawn fromoutside thevehicle.
Air recirculation:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Move theairintake levertothe ª
º position. Theair
flow iscirculated insidethevehicle. Air
flow control:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T urn theairflow control dialtochange theairflow
mode.
Ð Airflows fromthecenter andside
ventilators.
Ð Airflows fromthecenter andside
ventilators andfoot
outlets.
Ð Airflows mainly fromthefoot outlets.
Ð Airflows fromthefront defogger andfoot
outlets.
Ð Airflows mainly fromthefront defogger
outlets.
Fan speed control:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T urn thefanspeed control ª
º dial clockwise to
increase thefanspeed.
T urn thefanspeed control ª
º dial counterclock -
wise todecrease thefanspeed. A/C
(AirConditioner) operation:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Push theªA/Cº button toturn onoroff the air
conditioner. Whentheairconditioner ison, the ªA/Cº
indicator lightonthe button illuminates.
T emperature control:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T urn thetemperature controldialtoset the desired
temperature. Turn thedial between themiddle andthe
right position toselect thehot temperature. Turn the
dial between themiddle andtheleftposition toselect
the cool temperature.
Heater operation
GUID-ED0 DE5AF-669 2-440D-A937 -F37C2F707C77
Heating:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode isused todirect heated airtothe foot
outlets.
1. Move theairintake levertothe ª
º position for
normal heating.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe desired
position between themiddle andthehot (right)
position.
V entilation:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode directs outside airtothe side andcenter
ventilators.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe desired
position.
Heater andairconditione r,and audio system
4-7
&RQGLWLRQ


> (GLW   0RGHO &$@
4-8
Heater andairconditioner ,and audio system
Defrosting ordefogging:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode directs theairtothe defogger outletsto
defrost/defog thewindows.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe desired
position between themiddle andthehot (right)
position.
. To remove frostfromtheoutside surfaceofthe
windshield quickly,turn thetemperature control
dial tothe maximum hotposition andthefan
speed control ª
º dial tomaximum position.
. Ifit is difficult todefog thewindshield, turnthe
ª A/Cº button on.
Bi-level heating:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode directs coolairfrom theside andcenter
ventilators andwarm airfrom thefoot outlets. When
the temperature controldialisturned tothe maximum
hot orcool position, theairbetween theventilators and
the foot outlets isthe same temperature.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe desired
position. Heating
anddefogging:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode heatstheinterior anddefogs thewindows.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe maximum
hot (right) position.
5. Push theªA/Cº button on.(The ªA/Cº indicator
light willilluminate.)
Air conditioner operation
GUID-D4 7C17DA-AC3 0-4F0E-ADA4 -8C2DE01347BA
The airconditioner systemshouldbeoperated for
approximately 10minutes atleast once amonth. This
helps prevent damage tothe airconditioner system
due tothe lack oflubrication.
Cooling:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode isused tocool anddehumidify theair.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Push theªA/Cº button on.(The ªA/Cº indicator
light willilluminate.)
5. Turn thetemperature controldialtothe desired
position between themiddle andthecool (left)
position.
A visible mistmaybeseen coming fromtheventilators
in hot, humid conditions asthe airiscooled rapidly.
This does notindicate amalfunction. Dehumidified
heating:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode isused toheat anddehumidify theair.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Push theªA/Cº button on.(The ªA/Cº indicator
light willilluminate.)
5. Turn thetemperature controldialtothe desired
position between themiddle andthehot (right)
position.
Dehumidified defogging:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode isused todefog thewindows and
dehumidify theair.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Push theªA/Cº button on.(The ªA/Cº indicator
light willilluminate.)
5. Turn thetemperature controldialtothe desired
position.
&RQGLWLRQ


> (GLW   0RGHO &$@
AUT OMA TICAIR CONDITIONER
GUID-EEDAB BD4-5460-4E74-8DA 6-F18F780C 0A98
JVH0053X
* The switch layoutinthe illustration isfor the Left-
Hand Drive(LHD) model. FortheRight-Hand Drive
(RHD) model, theswitch layoutwillbethe opposite.
1. Temperature controlbuttons (driverside)
2. ª
º rear defogger button(SeeªDefogger
switchº (P.2-21) .)
3. ª
º front defogger button
4. Display screen
5. ª
º Air recirculation button
6. ª
º Outside aircirculation button
7. Temperature controlbuttons (passenger side)
8. ªON´OFFº button
9. ªAUT Oºbutton
10. ª
º fan speed control button
11. ªMODEº button
12. ªA/Cº (AirConditioner) button
13. ªDUAL ºzone control ON/OFF button
Automatic operation(AUTO)
GUID-3C17 66E6-9820-4047-AC2F-4 76AFCB48C8B
The AUTOmode maybeused year-round asthe
system automatically controlstheairconditioner toa
constant temperature, airflow distribution andfan
speed afterthedesired temperature isset manually .
T o turn theheater andairconditioner onoroff, push
the ªON´OFFº button.
Cooling anddehumidified heating:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
1. Push theªAUT Oºbutton (theAUTOindicator light
will illuminate) .
2. Ifthe A/C indicator lightisnot illuminated, push
the ªA/Cº button (theA/C indicator lightwill
illuminate) .
3. Push thetemperature controlbuttons
(ª
º and
ª
º) to set the desired temperature.
.
When theDUAL indicator lightisnot illumi-
nated, pushing theªAUT Oºbutton (theAUTO
indicator lightwillilluminate) changesboththe
driver andpassenger sidetemperature.
.
When theDUAL indicator lightisnot illumi-
nated, pushing theªDUAL ºbutton (theDUAL
indicator lightwillilluminate) allowstheuser to independently
changethedriver andpassen-
ger side temperatures withthecorresponding
temperature controlbuttons (ª
º and
ª
º) .
.
T o cancel theseparate temperature setting,
push theªDUAL ºbutton (theDUAL indicator
light willturn off)and thedriver's side
temperature settingwillbeapplied toboth
the driver andpassenger sides.
4. Push either theoutside aircirculation ª
º
button orthe airrecirculation ª
º button (the
button withanindicator lightilluminated) for
approximately 2seconds toswitch tothe auto-
matic airintake control mode(theindicator light
will blink twice) .
A visible mistmaybeseen coming fromtheventilators
in hot, humid conditions asthe airiscooled rapidly.
This does notindicate amalfunction.
Heating (A/Coff):
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
1. Push theªAUT Oºbutton (theAUTOindicator light
will illuminate) .
2. Ifthe ªA/C indicator lightisilluminated, pushthe
ª A/Cº button (theA/C indicator lightwillturn off).
3. Push thetemperature controlbuttons (ª
º and
ª
º) to set the desired temperature.
.
When theDUAL indicator lightisnot illumi-
nated, pushing theªAUT Oºbutton (theAUTO
indicator lightwillilluminate) changesboththe
driver andpassenger sidetemperature.
.
When theDUAL indicator lightisnot illumi-
nated, pushing theªDUAL ºbutton (theDUAL
indicator lightwillilluminate) allowstheuser to
independently changethedriver andpassen-
ger side temperatures withthecorresponding
temperature controlbuttons (ª
º and
Heater andairconditione r,and audio system
4-9
&RQGLWLRQ


> (GLW   0RGHO &$@
4-10
Heater andairconditione r,and audio system
ª
º) .
.
T o cancel theseparate temperature setting,
push theªDUAL ºbutton (theDUAL indicator
light willturn off)and thedriver's side
temperature settingwillbeapplied toboth
the driver andpassenger sides.
. Donot setthe temperature lowerthantheoutside
air temperature. Doingsomay cause thetem-
perature tonot becontrolled properly.
. Ifthe windows fogup,use dehumidified heating
instead ofthe A/C offheating.
Dehumidified defrosting/defogging:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
1. Push thefront defogger ª
º button (theª
º
indicator lightwillilluminate) .
2. Push thetemperature controlbuttons (ª
º and
ª
º) to set the desired temperature.
. To quickly remove frostfromtheoutside surfaceof
the windshield, setthe temperature controland
the fanspeed tothe maximum levels.
. After thewindshield iscleared, pushtheªAUT Oº
button again(theAUTOindicator lightwillturn
off) .
. When thefront defogger ª
º button ispushed,
the airconditioner willautomatically turnonto
defog thewindshield ifthe outside temperature is
above -28C. Ifthe airrecirculation modeisturned
on atthe time, theventilation willchange fromthe
air recirculation modetothe outside aircirculation
mode toimprove thedefogging performance.
Do not setthe temperature toolow when thefront
defogger modeison (the ª
º indicator lightis
illuminated) ,because doingsomay fogupthe
windshield.
Manual operation
GUID-729 4676B-E04 5-4948-935 6-7E8823822C9D
The manual modecanbeused tocontrol theheater
and airconditioner toyour desired settings.
T o turn offthe heater andairconditioner, pushthe
ªON´OFFº button.
Fan speed control:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Push thefanspeed control ª
º button (+ side or