NISSAN QUEST 2008 V42 / 3.G 04IT Navigation Manual

Black plate (61,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
Other settings are also available for the map
screen, such as changing the map direction,
splitting the screen, etc.
SETTINGS OF HEADING/LONG
RANGE MAP VIEW
You can change the map direction (orientation)
in Plan View or change the position of the
vehicle icon to view a wider area in the traveling
direction.
These settings are available only in the Plan
View or Split (Plan View) mode.
NAV4173
1. Push<ENTER>while the current location
map screen is displayed.
NAV4174
2. Highlight [Heading] and push<ENTER>.
OTHER SETTINGS FOR THE MAP
SCREEN
Map settings3-15

Black plate (62,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
NAV2760
3. Highlight the preferred map orientation and
push<ENTER>. The indicator of the
selected map orientation illuminates.
INFO:
[Long Range Map View] is displayed only
when you select [Heading Up].
4. Push<MAP>to return to the current
location map screen.
Available map orientations
.North Up:
North is set at the top of the map.
.Heading Up:
The traveling direction is set at the top of the
map.
.Long Range Map View:
The vehicle icon is located slightly lower
than the center of the screen. This offers a
wider view in the traveling direction.
.Birdview
TMAngle:
This changes the BirdviewTMangle.
NAV2761North Up
NAV2762Heading Up
3-16Map settings

Black plate (63,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
NAV2763Long Range Map View
INFO:
If the map orientation is switched, the icon
displayed in the lower left corner is also
switched.
: North Up
: Heading Up
NAV2764
INFO:
You can also set the orientation of the map using
the following procedure.
1) Push<SETTING>.
2) Highlight [Navigation] and push<ENTER>.
3) Highlight [Heading] and push<ENTER>.
CHANGING THE BIRDVIEWTMANGLE
This changes the BirdviewTMangle.
This setting is available only in the BirdviewTMor
Split (BirdviewTM) mode.
Map settings3-17

Black plate (64,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
NAV4173
1. Push<ENTER>while the current location
map screen is displayed.
NAV4174
2. Highlight [Heading] and push<ENTER>.
NAV2765
3. Highlight [BirdviewTMAngle] and push
<ENTER>.
INFO:
This setting is available only when the map
view is set to the Birdview
TMor Split
(BirdviewTM) mode.
3-18Map settings

Black plate (65,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
NAV2766
4. Adjust the BirdviewTMangle by moving the
cursor in the direction of []or[].5. Push<MAP>to return to the current
location map screen.
NAV2764
INFO:
You can also set the Birdview
TMangle using the
following procedure.
1) Push<SETTING>.
2) Highlight [Navigation] and push<ENTER>.
3) Highlight [Heading] and push<ENTER>.
4) Highlight [Birdview
TMAngle] and push
<ENTER>.
Map settings3-19

Black plate (66,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
CHANGING THE SCALE OF THE LEFT
SCREEN
When the split screen is displayed, you can
change the scale of the left screen.
NAV2711
1. Push<ENTER>while the current location
map screen is displayed.
NAV2712
2. Highlight [Map View] and push<ENTER>.
3-20Map settings

Black plate (67,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
NAV2767
3. Highlight [Change Map Scale for Left] and
push<ENTER>.
INFO:
[Change Map Scale for Left] is displayed
only when the map view is in the Split (Plan
View) or Split (Birdview
TM) mode.
NAV2768
4. Highlight [Map Scale] and push<ENTER>.
Adjust the map scale by moving the cursor
in the direction of [+] or [−].
Use the joystick to adjust the scale of the
map.
After finishing the setup, push<ENTER>or
<BACK>to apply the scale setting.
5. Push<MAP>to return to the current
location map screen.
NAV2750
INFO:
You can also change the scale of the left screen
using the following procedure.
1) Push<SETTING>.
2) Highlight [Navigation] and push<ENTER>.
3) Highlight [Map View] and push<ENTER>.
4) Highlight [Change Map Scale for Left] and
push<ENTER>.
Map settings3-21

Black plate (68,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
Some landmarks in the surrounding area can be
displayed as icons on the screen.
DISPLAYING LANDMARK ICONS
This allows you to display or hide the landmark
icons by type.
Landmark icons that can be displayed
.Restaurant
.
Gas Station
.
Hotel
.
AT M
.
Rest Area
NAV2711
1. Push<ENTER>while the current location
map screen is displayed.
NAV2769
2. Highlight [Landmark Icons] and push
<ENTER>.
MAP ICONS
3-22Map settings

Black plate (69,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
NAV2770
3. Highlight the preferred icon and push
<ENTER>.
The icon display setting toggles on and off
each time you push<ENTER>.
The indicator of the selected icon illumi-
nates.
NAV2771
4. Push<MAP>to return to the current
location map screen.
The activated landmark icons are displayed
on the map.
NAV2772
INFO:
You can also set the landmark icons using the
following procedure.
1) Push<SETTING>.
2) Highlight [Navigation] and push<ENTER>.
3) Highlight [Landmark Icons] and push
<ENTER>.
Map settings3-23

Black plate (70,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
MAP SYMBOLS
This navigation system uses symbols to display facilities.
NAI0502
3-24Map settings