NISSAN ROGUE SELECT 2015 2.G Quick Reference Guide

9
WINDSHIELD WIPER AND WASHER SWITCH
Move the lever to one of the following positions
to operate the windshield wipers:

1 Mist (MIST) - One sweep operation of the
front wipers.

2 Intermittent (INT) - Front wipers operate
intermittently. The intermittent operation
speed can be adjusted by twisting the time
control ring
3 to increase or decrease
wiper speed.

4 Low (LO) - Front wipers operate at a
continuous low-speed.

5 High (HI) - Front wipers operate at a
continuous high-speed.

6 Front Washer - Pull the lever toward you
to activate the front washer. The front wipers
will operate several times.
REAR WINDSHIELD WIPER AND WASHER

7 Intermittent (INT) - Rear wiper
operates intermittently.

8 Low (ON) - Rear wiper operates at a
continuous low-speed.

9 Rear Washer - Push the lever forward to

activate the rear washer. The rear wiper will
operate several times.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
3
1
2
4
5
MIST
OFF
INT
LO
HI
6
9
INT
ON7
8
1706218_15a_Rogue_Select_QRG_111814.indd 911/18/14 2:44 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.

10
FIRST DRIVE FEATURES
MANUAL CLIMATE CONTROLS
1 FAN SPEED CONTROL DIAL
Turn the fan speed control dial to the left (LO) or right (HI) to control fan speed.
2 TEMPERATURE CONTROL DIAL
Turn the temperature control dial to set the desired temperature. Turn the control dial
to the left for cooler air or the right for warmer air.
3 AIR FLOW CONTROL DIAL
Turn the dial to select one of the following air flow outlets:

Air flows from center and side vents with maximum cooling (air condit\
ioning).
Air flows from the center and side vents.

Air flows from the center, side and foot vents.

Air flows mainly from the foot vents.

Air flows from the defroster and foot vents.

Air flows mainly from the defroster vents.
4 DEFROSTING/DEFOGGING FRONT AND SIDE WINDOWS
Turn the air flow control dial to the front window defroster mode
. If it is difficult to
defog the windows, push the A/C button
6 on. This feature removes humidity from
the air.

Turn the temperature control dial left or right to set the desired temper\
ature.

To set the defroster on high, turn both the fan speed dial 1 and the temperature
control dial
2 all the way to the right.
5 DEFROSTING REAR WINDOW
Push the rear window defroster button. Push the button again to manually\
turn the
defroster off. This function automatically turns off after approximately 15 minutes.
6 A/C ON/OFF BUTTON
Press the A/C button to turn the air conditioner system on or off. This system helps
cool and dehumidify the air inside the cabin and defog the windows.
7 AIR RECIRCULATION BUTTON
The air recirculation button is used to avoid outside odors.

Press the air recirculation button
once to turn it on and press again to turn it off.

The air recirculation mode cannot be activated when the climate control s\
ystem is in
the front defroster mode
or the front defroster and foot outlet mode .
For more information, refer to the “Instruments and controls (section 2)” and the “Heater, air conditioner, audio,
phone and voice recognition systems (section 4)” of your Owner’s Manual.
132
5467
1706218_15a_Rogue_Select_QRG_111814.indd 1011/18/14 2:44 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.

11
FM/AM/SiriusXM®* SATELLITE RADIO WITH CD PLAYER
(if so equipped)
1 PWR (power) BUTTON/VOL (volume) CONTROL KNOB
Press the PWR (power) button to turn the system ON or OFF.

Turn the VOL (volume) control knob to the right or left to increase or decrease
the volume.
2 ENTER|SETTING BUTTON/TUNE•SCROLL CONTROL KNOB
The settings menu will appear after pushing the ENTER|SETTING button.

To manually tune the radio, turn the TUNE•SCROLL control knob left or right.
3 SEEK•CAT BUTTONS
To scan through each broadcasting station, press the SEEK•CAT buttons.

For satellite radio, to switch to the first channel of the previous or next category, press
the SEEK•CAT buttons.

To skip from one track to another on a CD, press the SEEK•CAT buttons.

When the SEEK•CAT buttons are pressed and held while a CD is playing,
the CD will rewind or fast forward. When the button is released, the CD will play at
normal speed.
4 STATION SELECT BUTTONS
Twelve stations can be set for the FM band, 6 for the AM band and 18 for
satellite radio.

To store a station in a preset, you must first select a radio band by pressing the
FM•AM button
5 or button 6 then tune to the desired FM, AM or satellite
radio station.

Then press and hold the desired station select button (1 -6 ) until a beep is heard and
the sound is briefly muted. The channel indicator will appear on the display, and the
sound will resume. Programing is now complete.

To retrieve a previously set station, select the radio band where the preset was stored
then press the corresponding station select button (1 -6 ).
*SiriusXM® Satellite Radio is only available on vehicles equipped with an optional s\
atellite radio subscription service.
For more information, refer to the “Heater, air conditioner, audio, phone and voice recognition systems (section
4)” of your Owner’s Manual.
1
356
24
1706218_15a_Rogue_Select_QRG_111814.indd 1111/18/14 2:44 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.

12
FIRST DRIVE FEATURES
CRUISE CONTROL (if so equipped)
The cruise control system enables you to set a
constant cruising speed once the vehicle has
reached 25 mph (40 km/h).

The system will automatically maintain the set
speed until you tap the brake pedal, accelerate,
cancel or turn the system off.

To activate the cruise control, push the ON•OFF
switch
1. The CRUISE indicator light in the
instrument panel will illuminate.

To set a cruising speed, accelerate the vehicle to
the desired speed, push the COAST/SET switch

2 and release. The SET indicator
light in the instrument panel will illuminate. Take your foot off the accelerator pedal. Your
vehicle will maintain the set speed.

To reset at a faster cruising speed, push and hold the ACCEL/RES switch
3.
When the vehicle attains the desired speed, release the switch.

To reset at a slower cruising speed, push and hold the COAST/SET switch
2.
Release the switch when the vehicle slows to the desired speed.

To cancel the preset speed, tap the brake pedal or push the CANCEL switch
4.

To turn off cruise control, push the ON•OFF switch
1. Both the CRUISE indicator
light and SET indicator light in the instrument panel will extinguish.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
3
2
1
4
1706218_15a_Rogue_Select_QRG_111814.indd 1211/18/14 2:44 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.

13
TRIP COMPUTER
With the ignition switch in the ON position,
trip computer
1 modes can be selected
by pressing the
switch 2 on the
instrument panel.

The following modes can be selected in the display:
• Fuel Economy – displays the current and
average fuel consumption.
• Average Speed – displays the average vehicle
speed since the last reset.
• Driving Distance – displays the distance driven since the last reset.
• Elapsed Time – displays the time since the last reset.
• Range (dte) – displays the estimated distance to empty (dte) the vehicle can be
driven before refueling.
• Settings – allows you to set the clock, preferences for alerts, maintenance intervals or
language displays. Turn the
switch 2 to select or adjust menu items
and press the button to set.

To reset Fuel Economy, Average Speed, Driving Distance and Elapsed Time, press the
switch
2 for more than 3 seconds.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
2
1
BLUETOOTH® HANDS-FREE PHONE SYSTEM (if so equipped)
A cellular telephone should not be used
while driving so full attention may be given to
vehicle operation.*
SYSTEM OPERATING TIPS

Press the button to interrupt the voice
prompts at any time and speak a command after
the tone.

To use the system faster, you may speak the
second level commands with the main menu
command on the main menu. For example,
press the
button and after the tone say
“Call Redial”.

The “Help” command can be used to hear a list of
available commands at any time.

Reduce background noise as much as possible by
closing windows and pointing HVAC vents away from
the ceiling.

Speak naturally without long pauses and without raising your voice.
SYSTEM GUIDE
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.
1706218_15a_Rogue_Select_QRG_111814.indd 1311/18/14 2:44 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.

14
SYSTEM GUIDE
When speaking phonebook names, please be aware some phones require the la\
st name
to be spoken before the first name. For example, “Michael Smith” may be spoken as
“Smith Michael”.

To cancel a Voice Recognition session, say “Exit” or press and hold the button.

To decrease or increase the volume of the voice prompts, push the volume \
control
switches
or
on the steering wheel or turn the VOL (volume) control knob on the
audio system while the system is responding.

Voice commands can be used to operate various Bluetooth® System features using the
NISSAN Voice Recognition System. See your Owner’s Manual for detailed information.

For more detailed information and instructions, refer to your cellular phone’s Owner’s
Manual and visit www.nissanusa.com/bluetooth.
CONNECTING PROCEDURE

The vehicle must be stationary when connecting the phone.
1. Press the

button on the steering wheel. The system announces the

available commands.
2. Say: “Connect Phone”. The system acknowledges the command and announces the next
set of available commands.
3. Say: “Add Phone”. The system acknowledges the command and asks you to initiate
connecting from the phone handset.
4. Initiate connecting from the phone:
• The connecting procedure varies according to each cellular phone model.
For detailed connecting instructions and compatible phones, please visit
www.nissanusa.com/bluetooth.
• When prompted for a PIN, enter “1234” from the handset. (The PIN is assigned by
NISSAN and cannot be changed.)
5. Say a name for the phone when the system asks you to provide one. You can give the
phone a name of your choice.
PHONEBOOK SETUP

Depending on your cellular phone, the system may automatically download \
your cellular
phone’s entire phonebook to the vehicle’s Bluetooth® system.

If the phonebook does not download automatically, 40 entries can be
individually downloaded.

To manually download entries:
1. Push the

button on the steering wheel.

2. After the tone, say “Phonebook”.
3. After the next tone, say “Transfer Entry”. The system acknowledges the command and
asks you to initiate the transfer from the phone handset. The new contact’s phone
number will be transferred from the cellular phone to the vehicle.
1706218_15a_Rogue_Select_QRG_111814.indd 1411/18/14 2:44 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.

15
The transfer procedure varies according to each cellular phone. See your cellular
phone’s Owner’s Manual for details. You can also visit www.nissanusa.com/bluetooth
for instructions on transferring phone numbers from NISSAN - recommended
cellular phones.
4. The system repeats the number and prompts you for the next command. When you have
finished entering numbers or transferring an entry, choose “Store”.
5. The system confirms the name, location and number.
MAKING A CALL FROM THE PHONEBOOK
1. Press the

button.

2. After waiting for the tone, say “Call”.
3. After the next tone, speak the name of a phonebook entry. For example, “Michael Smith”.
4. Confirm the correct name is recognized by saying “Dial” after the tone.

Names stored in all UPPERCASE letters may not be recognized correctly by the Voice
Recognition system.
MAKING A CALL BY PHONE NUMBER
1. Press the

button. A tone will sound.
2. Say: “Call”. The system acknowledges the command and announces the next set of
available commands.
3. Say: “Phone Number”. The system acknowledges the command and announces the
next set of available commands.
4. Say the number you wish to call, starting with the area code in single digit format.
5. When you have finished speaking the phone number, the system repeats it back and
announces the available commands.
6. Say: “Dial”. The system acknowledges the command and makes the call.
RECEIVING/ENDING A CALL

When you receive a phone call, a ring tone sounds through the audio syste\
m.

To accept the call, press the
button.

To reject the call, press the button.

To hang-up the phone at the end of a call or to disconnect during call pl\
acement, press
the
button.
For more information, refer to the “Heater, air conditioner, audio, phone and voice recognition systems
(section 4)” of your Owner’s Manual.
1706218_15a_Rogue_Select_QRG_111814.indd 1511/18/14 2:44 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.

MEMO
1706218_15a_Rogue_Select_QRG_111814.indd 1611/18/14 2:44 PM

MEMO
1706218_15a_Rogue_Select_QRG_111814.indd 1711/18/14 2:44 PM

Nissan, the Nissan Brand Symbol, Z and
Nissan model names are Nissan trademarks.
©
2014 Nissan North America, Inc.
QR15E A 0S35U0
Printing: December 2014 (17)
To view detailed instructional videos,
go to www.nissanownersinfo.mobi/2015/rogueselect or snap this barcode with an appropriate barcode reader.
This Quick Reference Guide is intended to provide an overview of some of the unique features of your new vehicle. Please see
your Owner’s Manual for important safety information and system operation limitations. Features and equipment in your vehicle
may vary depending on model, trim level, options selected, order, date of production, region or availability. Therefore, you may find
information about features or equipment that are not included or installed on your vehicle.
All information, specifications and illustrations in this Quick Reference Guide are those in effect at the time of printing. NISSAN
reserves the right to change specifications, performance, design or component suppliers witho\
ut notice and without obligation.
From time to time, NISSAN may update or revise this Quick Reference Guide to provide owners with the most accurate
information currently available. Please carefully read and retain with this Quick Reference Guide all revision updates sent to you
by NISSAN to ensure you have access to accurate and up-to-date information reg\
arding your vehicle. Current versions of vehicle
Quick Reference Guides, Owner’s Manuals and any updates can also be found in the Owner section of the \
NISSAN website at
https://owners.nissanusa.com/nowners/navigation/manualsGuide. If you have questions concerning any information
in your Owner’s Manual, contact NISSAN Consumer Affairs. See the NISSAN CUSTOMER CARE PROGRAM page in the
Owner’s Manual for contact information.

Helpful Resources
Below is a list of helpful resources that can be used to learn
more about the vehicle’s systems and feature operations.

Vehicle Owner’s Manual

Navigation Owner’s Manual (if so equipped)

Printed Quick Reference Guide (this document)

www.NissanUSA.com/bluetooth

www.NissanUSA.com/connect

www.youtube.com/user/NissanUSA

NISSAN Consumer Affairs 1-800-647-7261

Electronic Quick Reference Guide
(Use Quick Response (QR) code or URL below.)
1706218_15a_Rogue_Select_QRG_111814.indd 211/18/14 2:43 PM