start engine NISSAN X-TRAIL 2015 Workshop Manual


> (GLW    0RGHO 7$@
the VDC/ESP warninglight
may illumi-
nate. Donot drive onthese typesofroads.
. When driving onanunstable surfacesuchas
a turntable, ferry,elevator orramp, theVDC/
ESP warning light
may illuminate. This
is not amalfunction. Restarttheengine after
driving ontoastable surface.
. Ifwheels ortires other thantheNISSAN
recommended onesareused, theVDC/ESP
system maynotoperate properly andthe
VDC/ESP warninglight
may illuminate.
. The VDC/ESP systemisnot asubstitute for
winter tiresortire chains onasnow covered
road.
The Vehicle Dynamic Control(VDC)/Electronic Stabi-
lity Program (ESP)system usesvarious sensors to
monitor driverinputs andvehicle motion. Undercertain
driving conditions, theVDC/ESP systemhelpsto
perform thefollowing functions.
. Controls brakepressure toreduce wheelslipon
one slipping drivewheel sopower istransferred to
a non slipping drivewheel onthe same axle.
. Controls brakepressure andengine outputto
reduce drivewheel slipbased onvehicle speed
(traction controlfunction) .
. Controls brakepressure atindividual wheelsand
engine outputtohelp thedriver maintain controlof
the vehicle inthe following conditions:
Ð understeer (vehicletendstonot follow the
steered pathdespite increased steeringinput)
Ð oversteer (vehicletendstospin duetocertain
road ordriving conditions) .
The VDC/ESP systemcanhelp thedriver tomaintain
control ofthe vehicle, butitcannot prevent lossof
vehicle control inall driving situations. When
theVDC/ESP systemoperates, theVDC/ESP
warning light
in the meter flashes sonote the
following:
. The road maybeslippery orthe system may
determine someaction isrequired tohelp the
vehicle onthe steered path.
. You may feelapulsation inthe brake pedal and
hear anoise orvibration fromunder thehood. This
is normal andindicates thattheVDC/ESP system
is working properly.
. Adjust yourspeed anddriving tothe road
conditions.
If a malfunction occursinthe system, theVDC/ESP
warning light
illuminates inthe meter. TheVDC/
ESP system automatically turnsoff.
The VDC/ESP OFFswitch isused toturn offthe VDC/
ESP system. TheVDC/ESP offindicator light
illuminates toindicate theVDC/ESP systemisoff.
When theVDC/ESP OFFswitch isused toturn offthe
system, theVDC/ESP systemstilloperates toprevent
one drive wheel fromslipping bytransferring powerto
a non slipping drivewheel. TheVDC/ESP warninglight
flashes ifthis occurs. Allother VDC/ESP
functions areoffand theVDC/ESP warninglight
will not flash. TheVDC/ESP systemisauto-
matically resettoon when theignition switchisplaced
in the ªOFFº position thenback tothe ªONº position.
See ªVehicle Dynamic Control(VDC)warning light/
Electronic StabilityProgram (ESP)warning lightº(P.2-
16) and ªVehicle Dynamic Control(VDC)offindicator
light/Electronic StabilityProgram (ESP)offindicator
lightº (P.2-19) .
The computer hasabuilt-in diagnostic featurethat
tests thesystem eachtimeyoustart theengine and
move thevehicle forward orinreverse ataslow speed.
When theself-test occurs,youmay hear aªclunkº noise
and/or feelapulsation inthe brake pedal. Thisis
normal andisnot anindication ofamalfunction.
VEHICLE DYNAMIC CONTROL (VDC)/
ELECTRONIC STABILITY PROGRAM (ESP)
S YSTEM OFFSWIT CH
GUID-6741A 6E6-5C87-4519-ADE2- B1D05929FA1D
SSD1149
The vehicle shouldbedriven withtheVehicle Dynamic
Control (VDC)/Electronic StabilityProgram (ESP)
system ONformost driving conditions.
When thevehicle isstuck inmud orsnow ,the VDC/
ESP system reduces theengine outputtoreduce
wheel spin.Theengine speedwillbereduced evenif
the accelerator isdepressed tothe floor. Ifmaximum
engine powerisneeded tofree astuck vehicle, turn
the VDC/ESP systemoff.
T o turn offthe VDC/ESP system,pushtheVDC/ESP
OFF switch. TheVDC/ESP offindicator light
will
illuminate.
Push theVDC/ESP OFFswitch againorrestart the
engine toturn ONthesystem.
Starting anddriving
5-27
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
5-28
Starting anddriving
GUID-D6 1024E5-C48 F-496E-ADD2-05254F815 CE1
The chassis controlisan electric controlmodule that
includes thefollowing functions:
. Active Trace Control
. Active Engine Brake
. Active RideControl
ACTIVE TRACECONTROL
GUID-A194BC 39-5509-44A9-B0A4-D7DB6C5B 4131
This system senses drivingbasedonthe driver's
steering andacceleration/braking patterns,andcon-
trols brake pressure atindividual wheelstoaid tracing
at corners andhelp smooth vehicleresponse.
The Active Trace Control canbeset toON (enabled)
or OFF (disabled) throughtheVehicle Information
Display ªSettingsº page.SeeªVehicle information
displayº (P.2-20) formore information.
When theVehicle Dynamic Control(VDC)/Electronic
Stability Program (ESP)OFFswitch isused toturn off
the VDC/ESP system,theActive Trace Control isalso
turned
off.
JVS0403X
When theActive Trace Control isoperated andthe
ªChassis Controlºmodeisselected inthe trip
computer, theActive Trace Control graphics are
shown inthe vehicle information display.(See ªTrip
computerº (P.2-34) .)
If the chassis controlwarning message appearsinthe
vehicle information display,it may indicate thatthe
Active Trace Control isnot functioning properly.Have
the system checked byaNISSAN dealerassoon as
possible. (SeeªVehicle information displaywarnings
and indicatorsº (P.2-28) .)
WARNING:
The Active Trace Control maynotbeeffective
depending onthe driving condition. Alwaysdrive
carefully andattentively.
When theActive Trace Control isoperating, youmay
feel apulsation inthe brake pedalandhear anoise.
This isnormal andindicates thattheActive Trace
Control isoperating properly.
Even ifthe Active Trace Control isset toOFF ,some
functions willremain ontoassist thedriver (for
example, avoidance scenes).
ACTIVE ENGINE BRAKE(Continuously
V ariable Transmission (CVT)models)
GUID-0FF9DF F6-696E-4189-AD9D-E1 914B89F4E4
The Active Engine Brakefunction addssubtle decel-
eration bycontrolling CVTgearratio, depending onthe
cornering conditioncalculated fromdriver's steering
input andplural sensors. Thisbenefit toeasier
traceability andless workload ofadjusting speedwith
braking atcorners.
The Active Engine Brakealsoadds subtle deceleration
with gear ratiocontrol according todriver's brake
pedal operation.
The Active Engine Brakecanbeset toON (enabled) or
OFF (disabled) throughtheVehicle Information Display
ªSettingsº page.SeeªVehicle information displayº
(P .2-20) formore information.
CHASSIS CONTROL
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
JVS0403X
When theActive Engine Brakeisoperated atcorners
and theªChassis Controlºmodeisselected inthe trip
computer, theActive Engine Brakegraphics areshown
in the vehicle information display.See ªTrip computerº
(P .2-34) formore information.
If the chassis controlwarning message appearsinthe
vehicle information display,it may indicate thatthe
Active Engine Brakeisnot functioning properly.Have
the system checked byaNISSAN dealerassoon as
possible.
WARNING:
The Active Engine Brakemaynotbeeffective
depending onthe driving condition. Alwaysdrive
carefully andattentively.
When theActive Engine Brakeisoperating, theneedle
of the tachometer willrise upand youmay hear an
engine noise.Thisisnormal andindicates thatthe
Active Engine Brakeisoperating properly.
ACTIVE RIDECONTROL
GUID-EE92B5 7E-E6A7-47CC-8CBE-7 38B0F9EF222
This system senses upperbodymotion basedon
wheel speed information andcontrols enginetorque
and four wheel brakepressure toenhance ridecomfort
in effort torestrain uncomfortable upperbodymove-
ment. Thissystem comeintoeffect above 40km/h (25
MPH) .When theVDC/ESP OFFswitch isused toturn
off the VDC/ESP system,theActive RideControl is
also turned off.Engine torquecontrol isavailable for
MR20 andQR25 engines only
.
JVS0398X
When thebrake control ofthe Active RideControl is
operated andtheªChassis Controlºmodeisselected
in the trip computer, theActive RideControl graphics are
shown inthe vehicle information display.See ªTrip
computerº (P.2-34) formore information.
If the chassis controlwarning message appearsinthe
vehicle information display,it may indicate thatthe
Active RideControl isnot functioning properly.Have
the system checked byaNISSAN dealerassoon as
possible.
When theActive RideControl isoperating, youmay
hear noise andsense slightdeceleration. Thisisnormal
and indicates thattheActive RideControl isoperating
properly .
Starting anddriving
5-29
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
steep descent thatengine braking aloneinFour-Wheel
Drive (4WD) modecannot control thespeed.
When driving forward onthe descent, thespeed can
be adjusted bythe brake oraccelerator operation.The
system maintains thespeed forreverse drivingonthe
descent.
HILL DESCENT CONTROL SWITCH
T32A130827- A22A42E7-41B 2-4114-88DB-9E1B7 BDE94E3
JVS0402X
When additional brakingisrequired onsteep downhill
roads, activate thehilldescent controlsystem by
pushing thehilldescent controlswitchon.
When thehilldescent controlsystem isactivated, the
hill descent controlsystem onindicator light
will
illuminate. (SeeªHilldescent controlsystem on
indicator lightº(P.2-18) .)Also, thestop/tail lights
illuminate whilethehilldescent controlsystem is
applying thebrakes tocontrol thevehicle speed.
T o activate thehilldescent controlsystem, satisfyallof
the following conditions:
. Shift thetransmission tothe forward orreverse
gear.
. Turn the4WD mode switch tothe LOCK mode
and drive thevehicle ataspeed under25km/h
(15 MPH) . .
Push thehilldescent controlswitchtothe ªONº
position.
If the accelerator orbrake pedal isdepressed whilethe
hill descent controlsystem ison, the system willstop
operating temporarily .As soon asthe accelerator or
brake pedal isreleased, thehilldescent controlsystem
begins tofunction againifthe hilldescent control
operating conditions arefulfilled.
The hilldescent controlsystem onindicator lightblinks
if the hilldescent controlswitchison and allconditions
for system activation arenot met, orifthe system
becomes disengaged forany reason.
When thevehicle speedexceeds 40km/h (25MPH) ,
the 4WD mode indicator lightchanges fromLOCK to
AUT O.Once thespeed decreases to25 km/h (15
MPH) ,turn the4WD mode switch toLOCK again to
turn onthe hilldescent controlsystem.
T o turn offthe hilldescent controlsystem, pushthehill
descent controlswitchtothe OFF position.
GUID-89 EA2F2C-B11 E-4266-AE54-208D2C5 5EC10
The Blind SpotWarning (BSW) systemhelpsalertthe
driver ofother vehicles inadjacent laneswhen
changing lanes.
The Lane Departure Warning (LDW) system helps
alert thedriver whenthevehicle istraveling closeto
either theleftorthe right ofatraveling
lane.
JVS0390X
The BSW/LDW systemsusetherearview cameraunit
*
1
with automatic washerandblower.
WARNING:
. The BSW system isnot areplacement for
proper driving procedure andisnot de-
signed toprevent contactwithvehicles or
objects. Whenchanging lanes,always use
the side andrear mirrors andturn andlook
in the direction youwillmove toensure itis
safe tochange lanes.Neverrelysolely on
the BSW system.
. The LDW system isonly awarning deviceto
help inform thedriver ofapotential unin-
tended lanedeparture. Itwill notsteer the
vehicle orprevent lossofcontrol. Itis the
driver's responsibility tostay alert, drive
safely, keepthevehicle inthe traveling lane,
Starting anddriving
5-31
BLIND
SPOTWARNING (BSW)/
LANE DEPARTURE WARNING (LDW)
S Y STEMS (ifequipped)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
S Y STEM ON:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The LDW indicator (white)inthe vehicle information
display willappear.
S Y STEM OFF:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The LDW indicator (white)inthe vehicle information
display willoff.
Perform thefollowing stepstoenable ordisable the
LDW system.
1. Use the
button untilªSettingsº displaysinthe
vehicle information display.Use the
to select
ªDriver Assistanceº .Then press theENTER
button.
2. Select ªDriving Aidsº,and press theENTER
button.
3. To set the LDW system toon oroff, use the
buttons tonavigate inthe menu andusethe
ENTER buttontoselect ªLaneº andpress the
ENTER button.
WARNING:
. The camera unitmay notbeable todetect
properly underthefollowing conditions:
Ð On roads where therearemultiple
parallel lanemarkers; lanemarkers that
are faded ornot painted clearly;yellow
painted lanemarkers; nonstandard lane
markers; orlane markers coveredwith
water, dirt,snow, etc.
Ð On roads where thediscontinued lane
markers arestill detectable.
Ð On roads where therearesharp curves.
Ð On roads where therearesharply con-
trasting objects, suchasshadows,
snow, water, wheelruts,seams orlines remaining
afterroadrepairs. (TheLDW
system coulddetect theseitemsaslane
markers.)
Ð On roads where thetraveling lane
merges orseparates.
Ð When thevehicle's traveling direction
does notalign withthelane marker.
Ð When theroad surface isvery dark due
to weak ambient lightorimpaired tail
lamp.
. When driving onacurved road,warning will
be late onthe outside ofthe curve.
BSW/LDW TEMPORAR YDISABLED STA-
TUS
GUID-1B DDF44E-AF F2-4E00-9455-635AEAA 0FD68
Under thefollowing condition, theBSW and/or LDW
system isturned offtemporarily ,the BSW indicator
(white) and/orLDWindicator (white)willblink, andthe
following message willappear inthe vehicle informa-
tion display:
. ªBack DoorOpenº
When theabove condition iscorrected, theBSW and/
or LDW system willresume automatically .
BSW/LDW AUTOMA TICDEACTIV ATION
GUID-2F69D EE5-07A4-4D46-9DF 1-D415DC6 DE324
When dirt,rainorsnow accumulates onthe camera,
the BSW and/or LDWsystem willbeturned off
automatically andcannot beremoved bythe automatic
washer andblower. TheBSW indicator (white)and/or
LDW indicator (white)willblink, andtheªNot available
Clean RearCameraº message willappear inthe
vehicle information display.
Action totake:
If the message appears,parkthevehicle inasafe
place, cleanthecamera unitwith asoft cloth. Thenturn off
and restart theengine.
BSW/LDW MALFUNCTION
GUID-BE7 2994E-574 0-4BDE-86C 1-2EB349CD BE95
When theBSW and/or LDWsystem malfunctions,
they willbeturned offautomatically ,the BSW indicator
(orange) and/orLDWindicator (orange)willilluminate
and theªSystem faultºmessage willappear inthe
vehicle information display.
Action totake:
Stop thevehicle inasafe location, turnoffand restart
the engine. Ifthe BSW indicator (orange)and/orLDW
indicator (orange)continues toilluminate, havethe
BSW and/or LDWsystem checked byaNISSAN
dealer.
CAMERA UNITMAINTENANCE
GUID-0ED FD818-00A 6-4767-884 7-3673FFD 43878
JVS0393X
The rearview cameraunit
*
1
for the LDW/BSW
systems islocated abovetherear licence plate.To
maintain theproper operation ofthe LDW/BSW
systems andhelp keep thesystem functioning, be
sure toobserve thefollowing:
. Always keepthecamera unitclean. Becareful not
to damage thenozzle ofautomatic washerand
blower.
Starting anddriving
5-35
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
SSD1034
If the driver activates theturn signal whileanother
vehicle isin the detection zone,thentheBlind Spot
Indicator lightflashes andachime willsound twice.
BSW TEMPORAR YDISABLED STATUS
GUID-0F E9D3F1-03F 8-43CE-BFD8-03D453 EFDB97
Under thefollowing condition, theBSW system is
turned offtemporarily ,the BSW indicator willblink, and
the following message willappear inthe vehicle
information display:
. ªBack DoorOpenº
When theabove condition iscorrected, theBSW
system willresume automatically .
BSW AUTOMA TICDEACTIV ATION
GUID-260373 8E-FAAD-45D6 -AA7E-7BC6 5AFF2F97
When dirt,rainorsnow accumulates onthe camera,
the BSW system willbeturned offautomatically and
cannot beremoved bythe automatic washerand
blower. TheBSW indicator willblink andtheªNot
available CleanRearCameraº message willappear in
the vehicle information display.
Action totake:
If the message appears,parkthevehicle inasafe
place, cleanthecamera unitwith asoft cloth. Thenturn
off and restart theengine.
BSW MALFUNCTION
GUID-DC9E 6DEC-176C-4 D78-A22D-716327A49A9 2
When theBSW system malfunctions, theywillbe
turned offautomatically ,the BSW indicator will
illuminate andtheªSystem faultºmessage willappear
in the vehicle information display.
Action totake:
Stop thevehicle inasafe location, turnoffand restart
the engine. Ifthe BSW indicator continues to
illuminate, havetheBSW system checked bya
NISSAN dealer.
CAMERA UNITMAINTENANCE
GUID-DB 9BD0F8-43C8-4F10 -BC52-E7E5A6 42BDCB
JVS0393X
The rearview cameraunit
*
1
for the BSW system is
located abovetherear licence plate.To maintain the
proper operation ofthe BSW system andhelp keep
the system functioning, besure toobserve the
following:
. Always keepthecamera unitclean. Becareful not
to damage thenozzle ofautomatic washerand
blower.
. Donot attach ªlicence plateaccessoriesº that
reflect light.
. Donot strike ordamage theareas around the
camera unit.
GUID-360 9F050-5091- 4101-96DB-2D 85C79F4D76
The Lane Departure Warning (LDW) system helps
alert thedriver whenthevehicle istraveling closeto
either theleftorthe right ofatraveling lane.
JVI0975X
The LDW system usesthemulti-sensing frontcamera
unit situated onthe windshield infront ofthe inside
rearview mirror
*
1
.
WARNING:
. This system isonly awarning deviceto
inform thedriver ofapotential unintended
lane departure. Itwill notsteer thevehicle or
prevent lossofcontrol. Itis the driver's
responsibility tostay alert, drivesafely, keep
the vehicle inthe traveling lane,andbein
control ofthe vehicle atall times.
. The system willnotoperate atspeeds below
approximately 60km/h (37MPH) orifit
cannot detectlanemarkers.
. Ifthe LDW system malfunctions, itwill
cancel automatically, andtheLDW ªSystem
faultº message willappear inthe vehicle
information display.
. Ifthe LDW ªSystem faultºmessage appears,
pull offthe road toasafe location andstop
Starting anddriving
5-39
LANE
DEPARTURE WARNING (LDW)
S Y STEM (ifequipped forEurope)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
5-40
Starting anddriving
the vehicle. Turn theengine offand restart
the engine. Ifthe LDW ªSystem faultº
message continues toappear, havethe
system checked byaNISSAN dealer.
. Excessive noisewillinterfere withthewarn-
ing chime sound, andthechime maynotbe
heard.
The system maynotfunction properly underthe
following conditions:
. Onroads where therearemultiple parallellane
markers; lanemarkers thatarefaded ornot
painted clearly;yellowpainted lanemarkers;
non-standard lanemarkers; orlane markers
covered withwater, dirt,snow ,etc.
. Onroads where thediscontinued lanemarkers are
still detectable.
. Onroads where therearesharp curves.
. On roads where therearesharply contrasting
objects, suchasshadows, snow,water, wheel
ruts, seams orlines remaining afterroad repairs.
(The Lane Departure Warning (LDW) system
could detect theseitemsaslane markers.)
. On roads where thetraveling lanemerges or
separates.
. When thevehicle's travelingdirection doesnot
align withthelane marker.
. When traveling closetothe vehicle infront ofyou,
which obstructs thelane camera unitdetection
range.
. When rain,snow ordirt adheres tothe windshield
in front ofthe lane camera unit.
. When theheadlights arenot bright duetodirt on
the lens orifthe aiming isnot adjusted properly.
. When strong lightenters thelane camera unit.
(For example, thelight directly shinesonthe front of
the vehicle atsunrise orsunset.)
. When asudden changeinbrightness occurs.(For
example, whenthevehicle entersorexits atunnel
or under abridge.)
LDW SYSTEM OPERA TION
GUID-5D2 78735-FB2A-4 876-B549-D059C0E4D 50E
JVS0439X
SSD0672
LDW indicator (inthe Vehicle information display)
The LDW system provides alane departure warning
function whenthevehicle isdriven atspeeds
approximately 60km/h (37MPH) andabove.
When thevehicle approaches eithertheleftorthe right
side ofthe traveling lane,awarning chimewillsound
and theLDW indicator inthe vehicle information
display willblink toalert thedriver. The
warning function willstop when thevehicle returns
inside ofthe lane markers.
The LDW system isnot designed towarn under the
following conditions.
. When youoperate thelane change signaland
change traveling lanesinthe direction ofthe
signal. (TheLDW system willbecome operable
again approximately 2seconds afterthelane
change signalisturned off.)
. When thevehicle speedlowers toless than
approximately 60km/h (37MPH) .
After theabove conditions havefinished andthe
necessary operatingconditions aresatisfied, theLDW
functions willresume.
T urning onoroff the LDW system
GUID-32550F 0C-0E6C-49C3-92BB -00578BDFA0E5
The LDW system isturned onoroff using thesettings
menu inthe vehicle information display.
S Y STEM ON:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The LDW indicator inthe vehicle information display
will appear.
S Y STEM OFF:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The LDW indicator inthe vehicle information display
will off.
Perform thefollowing stepstoenable ordisable the
LDW system.
1. Use the
button untilªSettingsº displaysinthe
vehicle information display.Use the
to select
ªDriver Assistanceº .Then press theENTER
button.
2. Select ªDriving Aidsº,and press theENTER
button.
3. To set the LDW system toon oroff, use the
buttons tonavigate inthe menu andusethe
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
set speed isexceeded anddriver intervention isnot
detected.
T urning thespeed limiteroff
GUID-604082 45-BB35-4F90-884A-8 3477F15BB08
The speed limitersystem willbeturned offwhen oneof
the following operations isperformed:
. Push thespeed limiterMAINswitch. Thespeed
limiter indicator andthesetspeed indicator onthe
vehicle information displaywillbeturned off.
. Push thecruise control MAINswitch. Thespeed
limiter information onthe vehicle information will
be replaced withthecruise control information.
For details seeªCruise controlº (P.5-43) .
. When thevehicle isstopped andtheignition is
placed tothe offposition.
T urning offthe speed limiterwillerase thesetspeed
limit memory .
Speed limitermalfunction
GUID-56D 8A157-AB4B- 4429-9C83-5333E82C8D98
If the speed limitermalfunctions, thespeed limiteron
the vehicle information displaywillflash.
T urn thespeed limiterMAINswitch offand have the
system checked byaNISSAN dealer.
T32A130 827-FF5B4 88B-DD40- 465E-8AD4-B D88C01B8 0E9
JVS0180X
Models without speedlimiter
JVS0427X
Models withspeed limiter
1. CANCEL switch
2. ACCELERA TE/RESUME switch
3. COAST/SET switch
4. Cruise control MAINswitch
5. Speed limiterMAINswitch
WARNING:
. Always observe theposted speedlimitsand
do not setthe speed overthem.
. Donot use thecruise control whendriving
under thefollowing conditions. Doingso
could cause aloss ofvehicle control and result
inan accident.
Ð When itis not possible tokeep the
vehicle ataconstant speed
Ð When driving inheavy traffic
Ð When driving intraffic thatvaries speed
Ð When driving inwindy areas
Ð When driving onwinding orhilly roads
Ð When driving onslippery (rain,snow, ice,
etc .)roads
CAUTION:
On manual Transmission (MT)model, donot
shift tothe ªNº (Neutral) positionwithout
depressing theclutch pedalwhenthecruise
control isoperated. Shouldthisoccur, depress
the clutch pedalandturn thecruise control MAIN
switch offimmediately. Failuretodo somay
cause engine damage.
PRECAUTIONS ONCRUISE CONTROL
T32A1308 27-DF670F 83-9B80-4A99-B18B-0 4CB9B1ECB D9
. Ifthe cruise control system malfunctions, itwill
cancel automatically .The CRUISE indicator inthe
vehicle information displaywillthen blink towarn
the driver.
. Ifthe CRUISE indicator blinks,turnthecruise
control MAINswitch offand have thesystem
checked byaNISSAN dealer.
. The CRUISE indicator mayblink when thecruise
control MAINswitch isturned ONwhile pushing
the ACCELERA TE/RESUME, COAST/SETor
CANCEL switch.To properly setthe cruise control
system, perform thefollowing procedures.
Starting anddriving
5-43
CRUISE
CONTROL (ifequippe d)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
5-44
Starting anddriving
CRUISE CONTROL OPERATIONS
T32A1308 27-4BD70 071-615A-4B E0-8E01-02D3FB02318A
The cruise control allowsdriving atspeeds above40
km/h (25MPH) without keeping yourfootonthe
accelerator pedal.
For gasoline enginemodels, thecruise control will
automatically becanceled ifthe vehicle slowsdown
more thanapproximately 13km/h (8MPH) below the
set speed.
For diesel engine models, thecruise control will
automatically becanceled ifthe vehicle speedslows
to less than approximately 35km/h (22MPH) .
Moving theshift lever tothe ªNº (Neutral) positionwill
cancel andtheCRUISE indicator willoff.
T urning oncruise control
T32A1308 27-D9A26350-0978 -4C2D-81F7 -A433A8DD2D61
Push theMAIN switch. TheCRUISE indicator inthe
vehicle information displaywillappear.
Setting cruising speed
T32A1308 27-C830EB 0E-975B-4C 65-891B-9EDAAA4D8E3 E
1. Accelerate tothe desired speed.
2. Push theCOAST/SET switchandrelease it.
3. Take your footoffthe accelerator pedal.
The vehicle willmaintain thesetspeed.
Passing anothervehicle:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Depress theaccelerator pedaltoaccelerate. After
releasing theaccelerator pedal,thevehicle willreturn
to the previously setspeed.
The vehicle maynotmaintain thesetspeed when
going upordown steep hills.Insuch cases, drive
without thecruise control. Resetting
toslower speed:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Use anyone ofthe following methodstoreset toa
slower speed.
. Lightly tapthefoot brake pedal. When thevehicle
reaches thedesired speed,pushandrelease the
COAST/SET switch.
. Push andhold theCOAST/SET switch.Whenthe
vehicle reaches thedesired speed,release the
COAST/SET switch.
. Quickly pushandrelease theCOAST/SET switch.
This willreduce thevehicle speedbyabout 1km/h
or 1MPH.
Resetting tofaster speed:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Use anyone ofthe following methodstoreset toa
faster speed.
. Depress theaccelerator pedal.Whenthevehicle
reaches thedesired speed,pushandrelease the
COAST/SET switch.
. Push andhold theACCELERA TE/RESUME
switch. Whenthevehicle reaches thedesired
speed, release theACCELERA TE/RESUME
switch.
. Quickly pushandrelease theACCELERA TE/
RESUME switch.Thiswillincrease thevehicle
speed byabout 1km/h or1MPH.
Resuming atpreset speed:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push andrelease theACCELERA TE/RESUME switch.
The vehicle willresume thelast setcruising speed
when thevehicle speedisover 40km/h (25MPH) .
Cancelling cruisingspeed
T32A130 827-D50DF32 4-B09E-4323-8AC9-3 5C0187CD15 A
Use anyone ofthe following methodstocancel theset
speed.
. Push theCANCEL switch.
. Tap the foot brake pedal.
. Push thecruise control MAINswitch. TheCRUISE
indicator willturn off.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
5-46
Starting anddriving
Ð When driving onasteep downhill slope
or roads withsharp curves.
Ð When towing atrailer.
. Insome roadortraffic conditions, the
forward emergency brakingsystemmay
unexpectedly pushtheaccelerator pedalup
or apply partial braking. Whenacceleration
is necessary, continuetodepress theaccel-
erator pedaltooverride thesystem.
. Braking distances increaseonslippery sur-
faces.
. Excessive noisewillinterfere withthewarn-
ing chime sound, andthechime maynotbe
heard.
. The system isdesigned toautomatically
check thesensor's functionality, withincer-
tain limitations. Thesystem maynotdetect
some forms ofobstruction ofthe sensor
area ofthe front bumper suchasice, snow,
stickers, forexample. Inthese cases, the
system maynotbeable towarn thedriver
properly. Besure thatyoucheck, cleanand
clear thesensor areaofthe front bumper
regularly.
T urning theforward emergency brakingsys-
tem ON/OFF
GUID-91AA4 E9D-2919-400F-B632-6E 30412A721C
Perform thefollowing stepstoturn theforward
emergency brakingsystemONorOFF .
1. Using the
switches andtheENTER button
on the leftside ofthe steering wheel,selectthe
Settings menuinthe vehicle information display.
(See ªSettingsº (P.2-21) .)
2. Using the
switches andtheENTER button,
navigate tothe [Driver Assistance] menu,followed by
the [Driving Aids]menu.
3. Inthe [Driving Aids]menu, highlight the[Emer-
gency Brake] itemandusetheENTER buttonto
toggle between ON(enabled) orOFF (disabled) .
JVS0299X
When theforward emergency brakingsystemisturned
off, the forward emergency brakingsystemwarning
light (orange) willilluminate.
System temporarily unavailable
GUID-450 42812-084 F-4AD4-831 C-D92669CF 9587
Condition A:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
When theradar sensor picksupinterference from
another radarsource, makingitimpossible todetect a
vehicle ahead,theforward emergency brakingsystem
is automatically turnedoff.The forward emergency
braking systemwarning light(orange) andthedriver
assist system forward indicator (orange)willilluminate.
Action totake:
When theabove conditions nolonger exist,the
forward emergency brakingsystemwillresume auto-
matically . Condition
B:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
When thesensor areaofthe front bumper iscovered
with dirtorobstructed, makingitimpossible todetect a
vehicle ahead,theforward emergency brakingsystem
is automatically turnedoff.The forward emergency
braking systemwarning light(orange) willilluminate
and theªfront radarobstructionº warningmessage will
appear inthe vehicle information display.
Action totake:
If the warning light(orange) comeson,park thevehicle
in asafe location andturn theengine off.Check tosee
if the sensor areaofthe front bumper isblocked. Ifthe
sensor areaofthe front bumper isblocked, removethe
blocking material.Restarttheengine. Ifthe warning
light continues toilluminate, havetheforward emer-
gency braking systemchecked byaNISSAN dealer.
System malfunction
GUID-03AB 42D0-B4F4-4 D8F-9706-47A73CB97E06
If the forward emergency brakingsystemmalfunctions,
it will beturned offautomatically ,a chime willsound,
the forward emergency brakingsystemwarning light
(orange) willilluminate andthewarning message
[Malfunction] willappear inthe vehicle information
display .
Action totake:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
If the warning light(orange) comeson,park thevehicle
in asafe location, turntheengine offand restart the
engine. Ifthe warning lightcontinues toilluminate, have
the forward emergency brakingsystemchecked bya
NISSAN dealer.
&RQGLWLRQ
([FHSWIRU&KLQD