controls NISSAN X-TRAIL 2017 Owner's Manual


> (GLW    0RGHO 7$@
2-18
Instrument sand controls
High beam assist indicator light(if
equipped)
GUID-50 DB9FD6-A5 BA-4734-B4 8F-5B6262B 538DF
The indicator lightilluminates whentheheadlights
come onwhile theheadlight switchisin the ªAUT Oº
position withthehigh beam selected. Thisindicates
that thehigh beam assist system isoperational. (See
ªHeadlight andturn signal switchº (P.2-39) .)
High beam indicator light
T32A1308 27-409109 9F-CB07-4 276-B667-3BD074F2E 546
The high beam indicator lightilluminates whenthe
headlight highbeam ison. The indicator turnsoffwhen
the low beam isselected. (SeeªHeadlight andturn
signal switchº (P.2-39) .)
Hill descent controlsystem onindicator
light (ifequipped)
T32A130 827-28B7FC 03-C4D5-4C6 C-8BFA-9E756 1E98498
When theignition switchisplaced inthe ªONº position
the hilldescent controlsystem onindicator light
illuminates brieflyandthen turns off.This indicates
that thehilldescent controlsystem isoperational.
The light illuminates whenthehilldescent control
system isactivated.
If the hilldescent controlswitchison and theindicator
light blinks, thesystem isnot engaged.
If the indicator lightdoes notilluminate orblink when
the hilldescent controlswitchison, the system may
not befunctioning properly.Have thesystem checked
by aNISSAN dealer.
For additional information, seeªHill descent control
systemº (P.5-30) .
Hill Start Assist system onindicator
light (ifequipped)
GUID-5D3BB 4C2-B651-4D95-98B6-BBF04E320 8E8
The light illuminates whentheconditions ofthe hillstart
assist system aresatisfied whenthevehicle isstopped
on ahill.
Then, thelight blinks whenthebrake pedalisreleased,
which indicates thatthehillstart assist system is
activated.
For additional information, seeªHill Start Assist
systemº (P.5-30) .
Malfunction IndicatorLight(MIL)
T32A1308 27-5D3C46 85-4828-40 4C-A15D-A0 C96B37A7ED
CAUTION:
. Continuing vehicleoperation withoutproper
servicing ofthe engine control systemand/
or Continuously Variable Transmission (CVT)
could leadtopoor driveability, reducedfuel
economy, anddamage tothe engine control
system and/orCVTsystem, whichmayaffect
the vehicle's warranty coverage.
. Incorrect settingofthe engine control sys-
tem may lead tonon-compliance oflocal
and national emission lawsandregulations.
When theignition switchisin the ªONº position, the
Malfunction IndicatorLight(MIL) illuminates. After
starting theengine, theMIL turns off.This indicates
that theengine control system and/orCVTsystem is
operational.
If the MIL illuminates whiletheengine isrunning, itmay
indicate thattheengine control system isnot
functioning properlyandmay need servicing. Have
the vehicle checked, andifnecessary repaired,bya
NISSAN dealerpromptly . If
the MIL blinks (ifequipped) whiletheengine is
running, itmay indicate apotential malfunction inthe
emission controlsystem. Inthis case, theemission
control system maynotfunction properly andmay need
servicing. Havethesystem checked, andifnecessary
repaired, byaNISSAN dealerpromptly .
Precautions:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o reduce oravoid possible damagetothe engine
control system whentheMIL blinks:
. Avoid driving atspeeds above70km/h (43MPH) .
. Avoid sudden acceleration ordeceleration.
. Avoid goingupsteep uphillgrades.
. Avoid carrying ortowing unnecessary loads.
Rear foglight indicator light(if
equipped)
GUID-3BE98C 0D-E553-453A-8DD7-D10 AB9D1576E
The rear foglight indicator lightilluminates whenthe
rear foglight ison. (See ªFog lightswitchº (P.2-45) .)
Security indicator light
T32A130 827-CAB130 D8-5BB2-4700-9816-9 655A9AA77 D6
The security indicator lightblinks whentheignition
switch isin the ªLOCKº ,ªOFFº position. Thisfunction
indicates thesecurity system* equipped onthe vehicle
is operational. (*immobilizer)
If security systemismalfunctioning, thislight will
remain onwhile theignition switchisin the ªONº
position. (SeeªSecurity systemº(P.3-20) foradditional
information.)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Small lightindicator light
T32A1308 27-952927 B8-E86D-40 A0-ADA2-5ED657B0A 0DE
The light illuminates whentheheadlight switchis
turned to
the
position.
SPORT modeindicator light(if
equipped)
GUID-49D 371AC-80 67-4316-8AB D-88BA45B995CE
The SPORT modeindicator lightilluminates whenthe
SPORT modeisturned ªONº.(See ªDriving with
Continuously Variable Transmission (CVT)º(P.5-13)
for the use ofthe SPORT modeswitch.)
T railer direction indicatorlight(if
equipped)
GUID-588 27E84-89C9 -468A-8CE3-E00B748 76BDA
The light willilluminate whenever anadditional
electrical loadisdetected bythe direction indicator
system.
For additional information, seeªTrailer towing (for
Australia, NewZealand, SouthAfricaandEurope)º
(P .5-52) .
T urn signals/hazard indicatorlights
T32A1308 27-AEE83761-686F-46 6B-B3B8-EDF8D7DC0 C36
The turn signals/hazard indicatorlightsblinkwhen the
turn signal switch orhazard indicator flasherswitchis
turned on.(See ªHeadlight andturn signal switchº
(P .2-39) orªHazard indicator flasherswitchº (P.6-2) .)
V ehicle Dynamic Control(VDC)off
indicator light(except forEurope)/Electronic
Stability Program (ESP)offindicator light(for
Europe)
GUID-10 C0347A-5993 -4CEC-84D6-C6D36D4 E64D2
When theignition switchisin the ªONº position, the
V ehicle Dynamic Control(VDC)/Electronic Stability
Program (ESP)offindicator lightilluminates andthen
turns off.
The VDC/ESP offindicator lightilluminates whenthe
VDC/ESP offswitch ispushed tothe ªOFFº position.
When theVDC/ESP offswitch ispushed tothe ªOFFº
position, theVDC/ESP systemisturned off.
For details, seeªVehicle Dynamic Control(VDC)/
Electronic StabilityProgram (ESP)systemº (P.5-26) .
AUDIBLE REMINDERS
T32A1308 27-39FBB3 CF-11CD-4D A8-9DB3-FBA F4F2E2596
Brake padwear warning
T32A1308 27-2C378ED 7-F157-4822 -BCF0-6E95CAA4B880
The disc brake padshaveaudible wearwarnings.
When abrake padrequires replacement, itwill make a
high pitched scraping soundwhenthevehicle isin
motion. Thisscraping soundwillfirst occur onlywhen
the brake pedalisdepressed. Aftermore wearofthe
brake pad,thesound willalways beheard evenifthe
brake pedal isnot depressed. Havethebrakes
checked assoon aspossible ifthe wear warning
sound isheard.
Have thesystem checked, andifnecessary repaired,
by aNISSAN dealerpromptly .(See ªBrakesº (P.8-
15) .)
Intelligent Key buzzer (ifequipped)
T32A130 827-4A0804 B9-235D-48CF-8FEE-2 4C2BB97CE26
The Intelligent Key buzzer sounds ifany one ofthe
following improperoperations isfound.
. The ignition switchisnot returned tothe ªLOCKº
position whenlocking thedoors.
. The Intelligent Key isleft inside thevehicle when
locking thedoors.
. Any doors arenot closed securely whenlocking
the doors.
When thebuzzer sounds, besure tocheck boththe
vehicle andtheIntelligent Key .(See ªIntelligent Key
systemº (P.3-10) .)
Light reminder chime
T32A1308 27-6F4DC6 D7-A8DC-4 6E9-8460-5 5E269AD82 EA
The chime willsound ifthe driver's sidedoor isopened
while theheadlight switchisin either the
or
position andtheignition switchisin the ªOFFº or
ªL OCKº position.
Be sure toturn thelight switch tothe ªOFFº orªAUT Oº
(if equipped) positionwhenyouleave thevehicle.
Parking brakereminder chime
T32A130 827-0DD91 978-046D-4BBA-9DC9-E 4F062F1D5B0
The chime willsound ifthe vehicle isdriven atmore
than 7km/h (4MPH) (models notequipped with
electronic parkingbrake)or4km/h (2MPH) (models
equipped withelectronic parkingbrake)withthe
parking brakeapplied. Stopthevehicle andrelease
the parking brake.
Instrume ntsand controls
2-19
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
2-20
Instrument sand controls
Stop/Start SystemorIdling StopSystem
reminder buzzer(ifequipped)
GUID-69B3 6B73-5D2B-4 FF6-93AE-B76 254D6E0C7
The engine willshift tothe normal stopped stateifany
of the following operations ismade during Stop/Start
System orIdling StopSystem activation, andtheStop/
Start System orIdling StopSystem buzzerwillsound
if:
. The driver's seatbeltisunfastened andthe
driver's doorisopen (MTmodels) .
. The vehicle enginehoodisopen.
Close thehood orthe driver's door,orfasten theseat
belt then restart theengine usingtheignition switch.
For more information, seeªStop/Start SystemorIdling
Stop Systemº (P.5-18) .
T32A1308 27-3610D9 C5-CE18-4 747-932A-3E 708FB2DA5B
JVI0641X
The vehicle information display
*
1
is located between
the tachometer andthespeedometer. Itdisplays such
items as:
. Vehicle settings
. Trip computer information
. Driver Assistance (ifequipped)
. Speed limiterinformation (ifequipped)
. Cruise control system information (ifequipped)
. Intelligent Key operation information (ifequipped)
. Audio information (ifequipped)
. Navigation -turn byturn (ifequipped)
. Indicators andwarnings
. Tyre pressure information (ifequipped)
. Chassis Control
. Other information
Please notethattheinformation usedinthis manual is
written inUK English. Thereareafew differences in
the information forthe UKand U.S. English versions of
the system.
For language settings,seeªLanguageº (P.2-26) .
HOW TO USE THEVEHICLE INFORMA-
TION DISPLA Y
GUID-70 381C67-CDD B-4575-A232-0CA687BCF4A0
T ype A:
JVI0887X
The vehicle information displaycanbechanged using
the switches
and ENTER
*
1
located onthe
steering wheel.
*
1
- navigate throughtheitems invehicle
information display
- select/enter theVehicle information menu
items ortochange fromonedisplay screento
the next (i.e.trip, Fuel economy)
ENTER -change orselect anitem inthe vehicle
information display
*
2
- go back tothe previous menu
VEHICLE INFORMA TIONDISPLA Y
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
T ype B:
JVI0886X
The vehicle information displaycanbechanged using
the switches
*
2
and ENTER
*
1
located onthe
steering wheel.
*
1
- navigate throughtheitems invehicle
information display
ENTER -change orselect anitem inthe vehicle
information display
*
2
- select/enter theVehicle information menu
items ortochange fromonedisplay screento
the next (i.e.trip, Fuel economy)
*
3
- go back tothe previous menu
The
switch
*
1
also controls audioandcontrol
panel functions. Foradditional information, seeªSteer-
ing wheel mounted controlsforaudio (Type B)º(P.4-
76) .
ST ARTUP DISPLAY
GUID-E828 D244-7332 -4BBD-A2FA-07628 46370C8
When theignition switchisplaced inthe ªONº
position, thescreens thatdisplay inthe vehicle
information displayinclude:
. Trip computer
. Fuel economy
. Warnings
W arnings willonly display ifthere areany present, for
more information onwarnings andindicators, see
ªV ehicle information displaywarnings andindicatorsº
(P .2-28) .
T o control whatitems display inthe vehicle information
display ,see ªSettingsº (P.2-21) .
SETTINGS
GUID-225 5583B-12 E6-48CF-A CE1-EFD05B4 B73DC
The setting modeallows youtochange theinformation
displayed inthe vehicle information display:
. Driver Assistance (ifequipped)
. Clock
. Display Settings
. Vehicle Settings
. Maintenance
. Alert
. Tyre Pressures (ifequipped)
. Units
. Language (ifequipped)
. Factory Reset
Driver Assistance (ifequipped)
GUID-27D 6F794-B48A-4 53D-AF57-C93B0459653 E
T o change thestatus, warnings orturn onoroff any of
the systems/warnings displayedinthe ªDriver Assis-
tanceº menu,usethe
switch
*
1
to select andthe
ENTER
*
1
to change amenu item:
. Driving Aids
. Driver Attention
. Traffic Sign
. Parking Aids
. Chassis Control
Driving Aids:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o change thestatus, warnings orturn onoroff any of
the systems/warnings displayedinthe ªDriving Aidsº
menu, usethe
switch
*
1
to select andthe
ENTER
*
1
to change amenu item:
. Lane
Ð Lane Departure Warning (LDW) ON/OFF
. Blind Spot
Ð Blind SpotWarning (BSW) ON/OFF
. Emergency Brake
Ð Emergency BrakeON/OFF
Driver Attention:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Driver Attention ON/OFF
T raffic Sign:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T raffic SignON/OFF
Parking Aids:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o change thestatus orturn onoroff any ofthe
systems displayed inthe ªParking Aidsºmenu, usethe
switch
*
1
to select andtheENTER
*
1
to
change amenu item:
Instrume ntsand controls
2-21
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
2-22
Instrument sand controls
. Moving Object
Ð Moving ObjectDetection (MOD)ON/OFF
. Front Sensor
Ð Front parking sensorON/OFF
. Rear Sensor
Ð Rear parking sensorON/OFF
. Display
Ð Parking sensordisplay ON/OFF
. Volume
Ð Parking sensorbuzzervolume Low/Med./High
. Range
Ð Parking sensordetection rangeFar/Mid./Near
For additional information, seeªAround viewmonitorº
(P .4-10) .
Chassis Control:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o change thestatus, warnings orturn onoroff any of
the systems/warnings displayedinthe ªChassis
Controlº menu,usethe
switch
*
1
to select
and theENTER
*
1
to change amenu item:
. Trace Control
Ð See ªActive Trace Controlº (P.5-28) formore
information.
. Engine Brake(ifequipped)
Ð See ªActive Engine Brake(Continuously Vari-
able Transmission (CVT)models)º (P.5-28) for
more information.
Clock
GUID-5AF 46434-303 8-4E05-B84D-77316D A0684E
T o set the clock, seeªClockº (P.4-6) orªAudio
settingsº (P.4-58) inthis manual orthe separate
Navigation Owner'sManual.
Display Settings
GUID-72E3 9564-A9E2-43D0-9D 53-676FFB0D 1A09
The meter settings allowsthecustomer tochoose from
the various meterselections.
The meter settings canbechanged usingthe
*
1
and theENTER
*
1
buttons.
Contents Selection:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The items thatdisplay whentheignition switchis
placed inthe ªONº position canbeenabled/disabled.
T o change theitems thataredisplayed, usethe
*
1
to scroll andtheENTER
*
1
to select amenu item.
Body Colour:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The color ofthe vehicle thatdisplays inthe vehicle
information displaywhentheignition switchisplaced
in the ªONº position canbechanged.
1. Use the
switch
*
1
until ªBody Colourº is
selected, andpress ENTER
*
1
.
2. Select thebody color using the
switch
*
1
and press ENTER
*
1
. ECO
Mode Settings (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This setting allowsthecustomer tochange theECO
mode system settings.
Use the
switch
*
1
until ªECO ModeSettingsº is
selected, andpress ENTER
*
1
.
ECO Glow:
This setting allowsthecustomer toenable/disable the
ambient ECOindicator inthe vehicle information
display .
1. Use the
switch
*
1
to select ªECO Glowº.
2. Press theENTER
*
1
to turn ON/OFF the
ambient ECOinthe vehicle information display.
Display:
JVI0665X
This setting allowsthecustomer toenable/disable the
ECO pedal guide function.
1. Use the
switch
*
1
to select ªDisplayº .
2. Press theENTER
*
1
to select ªPedal Guideº or
ªFuel econ.º .
For detailed information, seeªECO modesystemº
(P .5-47) .
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Stop/Start (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o change thestatus, warnings orturn onoroff any of
the systems/warnings displayedinthe ªStop/Startº
menu, usethe
switch
*
1
to select andthe
ENTER
*
1
to change amenu item:
. Display
Ð Stop/Start displayON/OFF
. Trip CO2 saving
The ªTrip CO2 savingº andengine stoptimemode
shows theCO2 saving andengine stoptimesince
the last reset. TheCO2 saving andengine stop
time canbereset bypushing theENTER
*
1
(T ype A)or
*
2
(T ype B).
. Total CO2 saving
The ªTotal CO2 savingº andengine stoptime
mode shows:
Ð The estimated CO2exhaust emissions pre-
vented.
Ð The engine stoptimethattheengine hasbeen
stopped bythe ªStop/Start orIdling Stopº
System.
NO TE:
The ªTotal CO2 savingº andengine stoptime
values cannot bereset andshow accumu-
lated ªStop/Start orIdling StopºSystem
information sincethevehicle wasbuilt.
ECO Drive Report (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Display:
This setting allowsthecustomer toenable/disable the
ECO Drive Report inthe vehicle information display.
1. Use the
switch
*
1
to select ªECODrive
Reportº . 2.
Press theENTER
*
1
to turn ON/OFF theECO
management displayinthe vehicle information
display .
View History:
This setting allowsthecustomer toreset thepast
history ofthe fuel economy andthebest fueleconomy .
Welcome Effect:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Y ou can choose whether ornot todisplay thewelcome
screen whentheignition switchisplaced inthe ªACCº
or ªONº position. You can also choose thefollowing
items todefine howthewelcome screenlooks:
. Dial andPointer
. Display Effect
Select ªWelcome Effectsº usingthe
switch
*
1
and press theENTER
*
1
to select thismenu. Usethe
switch
*
1
to navigate between themenu options
and press theENTER
*
1
to turn each function ON/
OFF .
V ehicle Settings
GUID-41BC 8E41-F48A-4F7F-9C6 C-781FDBBDDD1D
The vehicle settings allowsthecustomer tochange
settings forthe following settings.
. Lighting
. Turn Indicator
. Unlocking
. Wipers
The vehicle settings canbechanged usingthe
*
1
, and theENTER
*
1
switches.
Lighting:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The ªLightingº menuhasthefollowing options:
. Welcome Light
The welcome lightingcanbeset tobe ON orOFF .
From theªLightingº menu,selectªWelcome
Lightº .Use theENTER
*
1
to turn thisfeature ON
orOFF .
. Int.Lamp Timer
The internal lighttimer canbeset tobe ON or
OFF .From theªLightingº menu,selectªInt.Lamp
Timerº .Use theENTER
*
1
to turn thisfeature ON
or OFF .
. Auto Lights
The sensitivity ofthe automatic lightingcanbe
adjusted. FromtheªLightingº menu,selectªAuto
Lightsº .Use the
switch
*
1
and theENTER
*
1
to select therequired sensitivity .The following
options areavailable:
Ð On Earliest
Ð On Earlier
Ð Standard
Ð On Later
. Headlight Offdelay (ifequipped)
The duration ofthe automatic headlights canbe
changed from0to 180 seconds. Fromthe
ªLightingº menu,selectªHeadlight Offdelayº .
Use theENTER
*
1
to change theduration.
T urn Indicator:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The ª3Flash Onºovertaking featurecanbeset tobe
ON orOFF .From theªTurn Indicatorº menu,selectª3
Flash Onº.Use theENTER
*
1
to turn thisfeature ON
or OFF .
Unlocking:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
There arethefollowing optionsinthe ªUnlockingº
menu:
. I±KeyDoor Lock
When thisitem isturned on,the request switchon
the door isactivated. FromtheªUnlockingº menu,
select ªI-KeyDoor Lockº.Use theENTER button
to activate ordeactivate thisfunction.
Instrume ntsand controls
2-23
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
2-24
Instrument sand controls
. Selective Unlock
When thisitem isturned on,and thedoor handle
request switchonthe driver's orfront passenger's
side door ispushed, onlythecorresponding door
is unlocked. Allthe doors canbeunlocked ifthe
door handle request switchispushed againwithin
1 minute. Whenthisitem isturned tooff, allthe
doors willbeunlocked whenthedoor handle
request switchispushed once.FromtheªUn-
lockingº menu,selectªSelective Unlockº.Use the
ENTER buttontoactivate ordeactivate this
function.
. Answer Bk.Horn (ifequipped)
When theanswer backhornison the horn will
chirp andthehazard indicators willflash once
when locking thevehicle withtheIntelligent Key or
remote keyless entryfunction.
Wipers:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
. Speed Dependent (ifequipped)
The ªSpeed Dependentº featurecanbeactivated
or deactivated. FromtheªWipersº menu,select
ªSpeed Dependentº .Use theENTER
*
1
to turn
this feature ONorOFF .
. Rain Sensor (ifequipped)
The ªRain sensorº featurecanbeactivated or
deactivated. FromtheªWipersº menu,select
ªRain Sensorº .Use theENTER
*
1
to turn this
feature ONorOFF .
. Reverse Link
The ªReverse Linkºwiper feature canbeset tobe
ON orOFF .From theªWipersº menu,select
ªReverse Linkº.Use theENTER
*
1
to turn this
feature ONorOFF .
. Drip Wipe
The ªDrip Wipeº feature canbeset tobe ON or
OFF .From theªWipersº menu,selectªDripWipeº . Use
theENTER
*
1
to turn thisfeature ONor
OFF .
Maintenance
GUID-641 7F271-F1CE- 47F6-A581-84B3241915 F7
JVI0978X
1. Service
2. Filter (ifequipped)
3. Tyre
4. Other
The maintenance modeallows youtoset alerts forthe
reminding ofmaintenance intervals.To change anitem:
Select ªMaintenanceº usingthe
switch
*
1
and
press ENTER
*
1
.
Service:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This indicator appearswhenthecustomer setdistance
comes forchanging theengine oiland filter. You can
set orreset thedistance forchecking orreplacing
these items. Forscheduled maintenance itemsand
intervals, seeaseparate maintenance booklet. Filter
(ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This indicator appearswhenthecustomer setdistance
comes forchanging theoilfilter. You can setorreset
the distance forchecking orreplacing theseitems. For
scheduled maintenance itemsandintervals, seea
separate maintenance booklet.
T yre:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This indicator appearswhenthecustomer setdistance
comes forreplacing tires.You can setorreset the
distance forreplacing tires.
WARNING:
The tirereplacement indicatorisnot asubstitute
for regular tirechecks, including tirepressure
checks. SeeªChanging tiresandwheelsº (P.8-
37) .Many factors including tireinflation, align-
ment, driving habitsandroad conditions affect
tire wear andwhen tiresshould bereplaced.
Setting thetire replacement indicatorfora
certain drivingdistance doesnotmean your
tires willlast that long. Usethetire replacement
indicator asaguide onlyandalways perform
regular tirechecks. Failuretoperform regular
tire checks, including tirepressure checkscould
result intire failure. Serious vehicledamage
could occurandmay lead toacollision, which
could result inserious personal injuryordeath.
Other:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This indicator appearswhenthecustomer setdistance
comes forchecking orreplacing maintenance items
other thantheengine oil,oilfilter andtires. Other
maintenance itemscaninclude suchthings asair filter
or tire rotation. You can setorreset thedistance for
checking orreplacing theitems.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Alert
GUID-E486 29E9-A0E6-4 E9A-8778-A498C4B794D 4
This setting allowsthecustomer toset alarms.
Select ªAlertº usingthe
switch
*
1
and press
ENTER
*
1
.
Outside Temp. (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This setting allowsthecustomer toenable/disable the
alert foroutside temperature inthe vehicle information
display .
1. Use the
switch
*
1
to select ªOutside
T emp.º .
2. Press theENTER
*
1
to turn ON/OFF thealert.
Timer:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This setting allowsthecustomer toset analert tonotify
the driver thatthesettime hasbeen reached.
1. Use the
switch
*
1
to select ªTimerº .
2. Press theENTER
*
1
.
3. To change thetimer amount, usethe
switch
*
1
and theENTER
*
1
to save theselected time
amount.
Navigation (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This setting allowsthecustomer toenable/disable the
alert fornavigation inthe vehicle information display.
1. Use the
switch
*
1
to select ªNavigationº .
2. Press theENTER
*
1
to turn ON/OFF thealert.
Phone (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This setting allowsthecustomer toenable/disable the
alert fornavigation inthe vehicle information display.
1. Use the
switch
*
1
to select ªPhoneº .
2. Press theENTER
*
1
to turn ON/OFF thealert. Mail
(ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This setting allowsthecustomer toenable/disable the
alert fornavigation inthe vehicle information display.
1. Use the
switch
*
1
to select ªMailº.
2. Press theENTER
*
1
to turn ON/OFF thealert.
T yre pressures (ifequipped)
GUID-957 EC358-747F-4 558-9FB7-87BF7FC0C450
The settings inthe ªTyre pressuresº menuareall
related tothe Tyre pressure monitoring systemTPMS
(See ªTirePressure Monitoring System(TPMS)º (P.6-
2) ,ªTire Pressure Monitoring System(TPMS)º (P.5-4)
and ªTire Pressure Monitoring System(TPMS)º (P.8-
36) .).
. Target Front
. Target Rear
. Tyre Pressure Unit
. Calibrate
T arget Front:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The ªTarget Frontº tyrepressure isthe pressure
specified forthe front tyres onthe tyre placard (See,
ªTire Pressure Monitoring System(TPMS)º (P.5-4) and
ªTire placardº (P.9-9) .).
Use the
*
1
and theENTER
*
1
buttons to
select andchange thevalue forthe ªTarget Front/
T arget frontº tyrepressure.
T arget Rear:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The ªTarget Rearº tyrepressure isthe pressure
specified forthe rear tyres onthe tyre placard (see,
ªTire Pressure Monitoring System(TPMS)º (P.5-4) and
ªTire placardº (P.9-9) .).
Use the
*
1
and theENTER
*
1
buttons to
select andchange thevalue forthe ªTarget Rearº tyre
pressure. T
yre Pressure Unit:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The unitfortyre pressure thatdisplays inthe vehicle
information displaycanbechanged to:
. kPa
. psi
. bar
. Kgf/cm2
Use the
*
1
and theENTER
*
1
buttons to
select andchange theunit.
If necessary ,refer tothe following tabletoconvert
between units.
Instrume ntsand controls
2-25
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
2-26
Instrument sand controls
JVI0938X
Calibrate:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The tyrepressure isaffected bythe temperature ofthe
tyre; thetyre temperature increaseswhenthecaris
driven. To be able toaccurately monitorthetyre air
leakage andtoprevent falseTPMS warnings dueto
changes intemperature, theTPMS system uses
temperature sensorsinthe tyres toperform tempera-
ture compensation calculations.
On rare occasions itmay benecessary torecalibrate
the TPMS system reference temperature. Thisopera-
tion should onlybeperformed whentheactual tyre
pressure hasbeen adjusted, whilstthecurrent ambient
temperature issignificantly differenttothe current
calibration temperature. (SeeªTirePressure Monitor-
ing System (TPMS)º (P.5-4) .)
Use the
*
1
, and theENTER
*
1
switches to
start orcancel thecalibration process.Whilethe
calibration processisactive, themessage: ªResetting
tyre pressure systemºwillbedisplayed.
Units (ifequipped)
GUID-A1B3 43C6-49C7- 4BF7-9C43-DC 08E31FB329
The units thatareshown inthe vehicle information
display canbechanged:
. Distance/Fuel
. Temperature
Use the
*
1
, and theENTER
*
1
switches to
select andchange theunits ofthe vehicle information
display .
Distance/Fuel:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The unitforthe mileage thatdisplays inthe vehicle
information displaycanbechanged to:
. km,l/100km
. km,km/l
. miles, MPG(UK)
. miles, MPG(US)
Use the
*
1
and theENTER
*
1
switches to
select andchange theunit.
T emperature:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The temperature thatdisplays inthe vehicle information
display canbechanged from:
. 8C(Celsius) .
8F(Fahrenheit)
Use theENTER
*
1
to toggle choices.
Language (ifequipped)
GUID-76 1627AF-13 0C-43BD-83 EB-A9FF585F 1E70
The language ofthe vehicle information displaycanbe
changed to:
T ype A:
. English
. French
. German
. Italian
. Portuguese
. Dutch
. Spanish
. Turkish
. Russian
T ype B:
. English
. French
. Spanish
T ype C:
. English (U.S.)
. English (UK)
Use the
*
1
, and theENTER
*
1
switches to
select andchange thelanguage ofthe vehicle
information display.The language ofthe center dis-
play/navigation canbechanged independently ofthe
vehicle information display.For models withnavigation
system, seeªVehicle information andsettings (models
with navigation system)º(P.4-5) .For models without
navigation system,seeªAudio systemº (P.4-35)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Factory Reset
GUID-DB448 A2E-FABE-497 8-A5DE-79 E15734EC0 5
The settings inthe vehicle information displaycanbe
reset backtothe factory default. To reset thevehicle
information display:
1. Select ªFactory Resetºusingthe
switch
*
1
and press theENTER
*
1
.
2. Select ªYESºtoreturn allsettings backtodefault
by pressing theENTER
*
1
.
Instrume ntsand controls
2-27
&RQGLWLRQ
([FHSWIRU&KLQD