buttons NISSAN X-TRAIL 2019 Owners Manual


> (GLW    0RGHO 7$@
2-22
Instrument sand controls
. Moving Object
Ð Moving ObjectDetection (MOD)ON/OFF
. Front Sensor
Ð Front parking sensorON/OFF
. Rear Sensor
Ð Rear parking sensorON/OFF
. Display
Ð Parking sensordisplay ON/OFF
. Volume
Ð Parking sensorbuzzervolume Low/Med./High
. Range
Ð Parking sensordetection rangeFar/Mid./Near
For additional information, seeªAround viewmonitorº
(P .4-10) .
Chassis Control:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o change thestatus, warnings orturn onoroff any of
the systems/warnings displayedinthe ªChassis
Controlº menu,usethe
switch
*
1
to select
and theENTER
*
1
to change amenu item:
. Trace Control
Ð See ªActive Trace Controlº (P.5-28) formore
information.
. Engine Brake(ifequipped)
Ð See ªActive Engine Brake(Continuously Vari-
able Transmission (CVT)models)º (P.5-28) for
more information.
Clock
GUID-5AF 46434-303 8-4E05-B84D-77316D A0684E
T o set the clock, seeªClockº (P.4-6) orªAudio
settingsº (P.4-58) inthis manual orthe separate
Navigation Owner'sManual.
Display Settings
GUID-72E3 9564-A9E2-43D0-9D 53-676FFB0D 1A09
The meter settings allowsthecustomer tochoose from
the various meterselections.
The meter settings canbechanged usingthe
*
1
and theENTER
*
1
buttons.
Contents Selection:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The items thatdisplay whentheignition switchis
placed inthe ªONº position canbeenabled/disabled.
T o change theitems thataredisplayed, usethe
*
1
to scroll andtheENTER
*
1
to select amenu item.
Body Colour:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The color ofthe vehicle thatdisplays inthe vehicle
information displaywhentheignition switchisplaced
in the ªONº position canbechanged.
1. Use the
switch
*
1
until ªBody Colourº is
selected, andpress ENTER
*
1
.
2. Select thebody color using the
switch
*
1
and press ENTER
*
1
. ECO
Mode Settings (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This setting allowsthecustomer tochange theECO
mode system settings.
Use the
switch
*
1
until ªECO ModeSettingsº is
selected, andpress ENTER
*
1
.
ECO Glow:
This setting allowsthecustomer toenable/disable the
ambient ECOindicator inthe vehicle information
display .
1. Use the
switch
*
1
to select ªECO Glowº.
2. Press theENTER
*
1
to turn ON/OFF the
ambient ECOinthe vehicle information display.
Display:
JVI0665X
This setting allowsthecustomer toenable/disable the
ECO pedal guide function.
1. Use the
switch
*
1
to select ªDisplayº .
2. Press theENTER
*
1
to select ªPedal Guideº or
ªFuel econ.º .
For detailed information, seeªECO modesystemº
(P .5-47) .
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Alert
GUID-E486 29E9-A0E6-4 E9A-8778-A498C4B794D 4
This setting allowsthecustomer toset alarms.
Select ªAlertº usingthe
switch
*
1
and press
ENTER
*
1
.
Outside Temp. (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This setting allowsthecustomer toenable/disable the
alert foroutside temperature inthe vehicle information
display .
1. Use the
switch
*
1
to select ªOutside
T emp.º .
2. Press theENTER
*
1
to turn ON/OFF thealert.
Timer:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This setting allowsthecustomer toset analert tonotify
the driver thatthesettime hasbeen reached.
1. Use the
switch
*
1
to select ªTimerº .
2. Press theENTER
*
1
.
3. To change thetimer amount, usethe
switch
*
1
and theENTER
*
1
to save theselected time
amount.
Navigation (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This setting allowsthecustomer toenable/disable the
alert fornavigation inthe vehicle information display.
1. Use the
switch
*
1
to select ªNavigationº .
2. Press theENTER
*
1
to turn ON/OFF thealert.
Phone (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This setting allowsthecustomer toenable/disable the
alert fornavigation inthe vehicle information display.
1. Use the
switch
*
1
to select ªPhoneº .
2. Press theENTER
*
1
to turn ON/OFF thealert. Mail
(ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This setting allowsthecustomer toenable/disable the
alert fornavigation inthe vehicle information display.
1. Use the
switch
*
1
to select ªMailº.
2. Press theENTER
*
1
to turn ON/OFF thealert.
T yre pressures (ifequipped)
GUID-957 EC358-747F-4 558-9FB7-87BF7FC0C450
The settings inthe ªTyre pressuresº menuareall
related tothe Tyre pressure monitoring systemTPMS
(See ªTirePressure Monitoring System(TPMS)º (P.6-
2) ,ªTire Pressure Monitoring System(TPMS)º (P.5-4)
and ªTire Pressure Monitoring System(TPMS)º (P.8-
36) .).
. Target Front
. Target Rear
. Tyre Pressure Unit
. Calibrate
T arget Front:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The ªTarget Frontº tyrepressure isthe pressure
specified forthe front tyres onthe tyre placard (See,
ªTire Pressure Monitoring System(TPMS)º (P.5-4) and
ªTire placardº (P.9-9) .).
Use the
*
1
and theENTER
*
1
buttons to
select andchange thevalue forthe ªTarget Front/
T arget frontº tyrepressure.
T arget Rear:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The ªTarget Rearº tyrepressure isthe pressure
specified forthe rear tyres onthe tyre placard (see,
ªTire Pressure Monitoring System(TPMS)º (P.5-4) and
ªTire placardº (P.9-9) .).
Use the
*
1
and theENTER
*
1
buttons to
select andchange thevalue forthe ªTarget Rearº tyre
pressure. T
yre Pressure Unit:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The unitfortyre pressure thatdisplays inthe vehicle
information displaycanbechanged to:
. kPa
. psi
. bar
. Kgf/cm2
Use the
*
1
and theENTER
*
1
buttons to
select andchange theunit.
If necessary ,refer tothe following tabletoconvert
between units.
Instrume ntsand controls
2-25
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3. Push theªUNL OCKº
button
*
3
on the
remote controller again.
4. Alldoors willbeunlocked.
T o switch tothe selective doorunlock mode,perform
the following procedure.
Push theªLOCKº
*
2
and ªUNL OCKº
buttons
*
3
simultaneously formore than5seconds.
Perform thesame procedure todeactivate the
selective doorunlock mode.
Interior lighttimer (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The interior lighttimer activates andtheinterior lights
illuminate for15 seconds whenadoor isunlocked and
the interior lightswitch isin the ªDOORº position.
The interior lightscanbeturned offwithout waitingfor
15 seconds byperforming oneofthe following
operations.
. Turning theignition switchtothe ªONº position.
. Locking thedoors withtheremote controller.
. Switching theinterior lightswitch tothe ªOFFº
position.
Using panicalarm(ifequipped)
GUID-AE 80AD4C-8C 1B-4373-A61 8-7751551A5818
If you arenear yourvehicle andfeelthreatened, you
may activate thealarm tocall attention asfollows:
1. Push theªPANICº
button
*
4
on the remote
controller formore than0.5second.
2. The theft warning alarmwillstay onfor 25
seconds.
3. The panic alarmstops when:
. Ithas runfor25 seconds, or
. Any ofthe buttons onthe remote controller are
pushed. (Note:Panicbutton should bepushed for
more than0.5second.)
Battery indicator light
GUID-661 9AA05-216 E-46A7-A14 9-C4989F148C2E
The battery indicator light
*
4
(T ype A)or
*
5
(T ype B)
illuminates whenyoupush anybutton. Ifthe light does
not illuminate, thebattery isweak orneeds replace-
ment. Forinformation regardingreplacement ofa
battery ,see ªRemote controller batteryº(P.8-21) .
HAZARD INDICATOR OPERA TION
GUID-15B92 5D3-243B-42E9-9D0F-8 48B2E6C9D1D
When youlock orunlock thedoors, thehazard
indicator willflash asaconfirmation.
. ªLOCKº: Thehazard indicator flashesonce.
. ªUNL OCKº: Thehazard indicator flashestwice.
Hazard indicator mode(forSouth AfricaandEurope)
GUID-3F DB20C1-36 93-4948-A81 7-5CA991E3FB28
DOOR LOCK DOOR
UNLOCK
Remote keylessentrysystem HAZARD
-once HAZARD-twice
Hazard indicator mode(except forSouth AfricaandEurope)
GUID-8D3 A1428-9654 -46CD-875F-C1C543C3FC2C
DOOR LOCK DOOR
UNLOCK
Remote keylessentrysystem HAZARD
-twice HAZARD-none
Pre-drivi ngchecks andadjustment s
3-9
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-10
Pre-driving checksandadjustments
Hazard indicator andhorn mode (except forSouth AfricaandEurope)
GUID-D05F8 A1A-366B-4042-BD7A-2 75884BDEFB6
DOOR LOCK DOOR
UNLOCK
Remote keylessentrysystem HAZARD
-twice
HORN -once HAZARD
-once
HORN -none
Switching procedure (ifequipped)
GUID-908 7B197-55 5A-4F3D-A 8D6-E0ACA9 5CB83B
Y ou can switch thehazard indicator andhorn operation
with thefollowing procedures.
Push theªLOCKº
*
2
and ªUNL OCKº
*
3
buttons simultaneously formore than2.5seconds to
switch themode fromonetothe other.
When pushing thebuttons toset the hazard indicator
mode, thehazard indicator flashes3times.
When pushing thebuttons toset the hazard indicator
and horn mode, thehazard indicator flashesonceand
the horn chirps
once.
JI0469
T32A130 827-769E5 CB4-B87B-458F-A946 -17DD933A7 E45
SP A2502
T ype A
SP A2543
T ype B(example)
INTELLIGE NTKEY SY STEM (if
equipped)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
SP A2406
T ype C
SP A2431
T ype D
SP A2717
T ype E
1. Intelligent Key (2)
2. Mechanical key(inthe Intelligent Key) (2)
3. Key number plate(1)
WARNING:
. Radio waves couldadversely affectelectric
medical equipment. Thosewhouseapace-
maker should contact theelectric medical
equipment manufacturer forthe possible
influences beforeuse.
. The Intelligent Keytransmits radiowaves
when thebuttons arepushed. Theradio
waves mayaffect aircraft navigation and
communication systems.Donot operate the
Intelligent Keywhile onanairplane. Make
sure thebuttons arenot operated uninten-
tionally whentheunit isstored during a
flight.
The Intelligent Key system canoperate allthe door and
the back doorusing theremote controller functionor
pushing therequest switchonthe vehicle without
taking thekey outfrom apocket orpurse. The
operating environment and/orconditions mayaffect
the Intelligent Key system operation. Be
sure toread thefollowing beforeusingthe
Intelligent Key system.
CAUTION:
. Besure tocarry theIntelligent Keywith you
when operating thevehicle.
. Never leavetheIntelligent Keyinthe vehicle
when youleave thevehicle.
. When theoutside temperature isextremely
low, theIntelligent Keysystem maynot
function properly.
The Intelligent Key isalways communicating withthe
vehicle asitreceives radiowaves. TheIntelligent Key
system transmits weakradiowaves. Environmental
conditions mayinterfere withtheoperation ofthe
Intelligent Key system underthefollowing operating
conditions.
. When operating nearalocation wherestrong
radio waves aretransmitted, suchasaTV tower,
power station andbroadcasting station.
. When inpossession ofwireless equipment, such
as acellular telephone, transceiver, andCBradio.
. When theIntelligent Key isin contact withor
covered bymetallic materials.
. When anytype ofradio wave remote controlis
used nearby .
. When theIntelligent Key isplaced nearanelectric
appliance suchasapersonal computer.
. When thevehicle isparked nearaparking meter.
In such cases, correct theoperating conditions before
using theIntelligent Key function oruse themechanical
key .
Although thelifeofthe battery variesdepending onthe
operating conditions, thebattery's lifeisapproximately
2 years. Ifthe battery isdischarged, replaceitwith a
Pre-driving checksandadjustments
3-11
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
USING REMOTEKEYLESS ENTRYFUNC-
TION
GUID-27E5 A408-0CF3-4 029-BFC2-03A4C54 96881
SP A2349
T ype A
SP A2546
T ype B (example)
SP A1926A
T ype C
SP A2561
T ype D
SP A2718
T ype E
*
A
L OCK button
*
B
UNL OCK button
*
C
P ower backdoorbutton (ifequipped)
*
D
P ANIC button (ifequipped)
Operating range
GUID-B36C 97E8-08E8-47EA-82F0 -17A07F11790A
It is possible tolock/unlock alldoors including theback
door using theremote keyless entrysystem. The
operating distancedepends upontheconditions
around thevehicle. To securely operatethelock and
unlock buttons, approach thevehicle toabout 1m (3.3
ft) from thedoor.
The remote keyless entrysystem willnot function under
the following conditions:
. When theIntelligent Key isnot within the
operational range.
. When theIntelligent Key battery isdischarged.
For information regardingthereplacement ofabattery ,
see ªBatteryº (P.8-20) .
Pre-driving checksandadjustments
3-17
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-18
Pre-driving checksandadjustments
Locking doors
GUID-59 C48714-709 2-416E-964F-87ABE0DE37CD
1. Place theignition switchinthe ªOFFº position and
carry theIntelligent Key .
2. Close alldoors (including theback door).
3. Push theªLOCKº button
*
A
on the Intelligent
K ey .
4. Alldoors willbelocked. Thedoor lockindicator
light
(located onthe instrument panel)will
illuminate for1minutes (ifequipped) .
5. Operate thedoor handles toconfirm thatthe
doors havebeen securely locked.
CAUTION:
After locking thedoors usingtheIntelligent Key,
be sure thatthedoors havebeen securely
locked byoperating thedoor handles.
Unlocking doors
GUID-02 C4F53F-111 C-4240-90DA-B021C839 0A59
When youfirst receive thevehicle, thedoor unlock
mode isset tounlock allthe doors withonepush ofthe
ªUNL OCKº button
*
B
. The door unlock modecanbe
switched tothe selective doorunlock mode(if
equipped) .
T o change thedoor unlock modefromonetoanother,
see ªVehicle information displayº(P.2-20) .
All door unlock mode:
1. Push theªUNL OCKº button
*
B
on the Intelligent
K ey .
2. Alldoors (including theback door) willbe
unlocked.
Selective doorunlock mode(ifequipped):
1. Push theªUNL OCKº button
*
B
on the Intelligent
K ey . 2.
The driver's doorwillbeunlocked.
3. Push theªUNL OCKº button
*
B
on the Intelligent
K ey again.
4. Alldoors (including theback door) willbe
unlocked.
Automatic relock:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
All doors willbelocked automatically unlessoneofthe
following operations isperformed within30seconds or
1 minute afterpushing theªUNL OCKº button
*
B
on
the Intelligent Key while thedoors arelocked. Ifduring
this 30seconds or1minute timeperiod, the
ªUNL OCKº button
*
B
on the Intelligent Key is
pushed, alldoors willbelocked automatically after
another 30seconds or1minute.
. Opening anydoor orback door.
. Pushing theignition switch.
Opening orclosing backdoor(ifequipped)
GUID-7A97 DFB7-E05B -4600-BFF6 -A75E59407 982
Opening:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Push thepower backdoor button
*
C
for
more than1second.
2. The back doorwillautomatically open.
The hazard indicator flashes4times andtheoutside
chime sounds.
Closing:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Push thepower backdoorbutton
*
C
.
2. The back doorwillautomatically close.
The hazard indicator flashes4times andtheoutside
chime sounds.
If the button
*
C
is pushed whiletheback door
is being opened orclosed, theback doorwillreverse.
Using panicalarm(ifequipped)
GUID-493 7A23C-01 2A-422A-B E61-A0FEA 679E405
If you arenear yourvehicle andfeelthreatened, you
may activate thealarm tocall attention asfollows:
1. Push theªPANICº
button
*
D
on the
Intelligent Key for more than1second.
2. The theft warning alarmandheadlights (if
equipped) willstay onfor 25 seconds.
3. The panic alarmstops when:
.
It has runfor25 seconds, or
.
Any ofthe buttons onthe Intelligent Key are
pushed. (Note:Panicbutton should bepushed
for more than1second.)
HAZARD INDICATOR AND HORN OPERA-
TION
GUID-D81 C103B-F4 9C-4165-99 66-43D3288AC0B0
When youlock orunlock thedoors orthe back door
with therequest switchorthe remote keyless entry
function, thehazard indicator willflash andthehorn or
the outside chimewillsound asaconfirmation.
The following descriptions showhowthehazard
indicator andoutside chimewillactivate whenlocking
or unlocking thedoors orback door.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Hazard indicator mode(forSouth AfricaandEurope)
GUID-362 82E96-FFD1 -4266-BD28-6B6CCCE 40A4B
Operation DOORLOCK DOOR
UNLOCK
Intelligent Keysystem (usingdoor
handle orback doorrequest
switch) HAZARD
-once HAZARD
-twice
Remote keylessentrysystem
(using
or
button) HAZARD
-once HAZARD
-twice
Hazard indicator mode(except forSouth AfricaandEurope)
GUID-657 18739-3E9 A-41CF-BB5 C-1F201A5A2 2CE
Operation DOORLOCK DOOR
UNLOCK
Intelligent Keysystem (usingdoor
handle orback doorrequest
switch) HAZARD
-twice HAZARD
-none
Remote keylessentrysystem
(using
or
button) HAZARD
-twice HAZARD
-none
Hazard indicator andhorn mode (except forSouth AfricaandEurope)
GUID-EE13 7A74-2D68-4 16C-BCCB-700B45E14695
Operation DOORLOCK DOOR
UNLOCK
Intelligent Keysystem (usingdoor
handle orback doorrequest
switch) HAZARD
-twice
OUTSIDE CHIME-twice HAZARD
-once
OUTSIDE CHIME-once
Remote keylessentrysystem
(using
or
button) HAZARD
-twice
HORN -once HAZARD
-once
HORN -none
Switching procedure (ifequipped)
GUID-84 9C8DE2-DB F7-4AA6-90D 4-DCA29B9D DF46
T o switch thehazard indicator andhorn (chime)
operation, pushtheLOCK
and UNLOCK
buttons onthe Intelligent Key simultaneously formore
than 2.5seconds.
. When thehazard indicator modeisset, thehazard
indicator flashes3times. .
When thehazard indicator andhorn mode areset,
the hazard indicator flashesonceandthehorn
chirps once.
JI0469
Pre-driving checksandadjustments
3-19
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
T32A1308 27-429755 59-4B72-431E -97D9-4E2AB37B374F
WARNING:
. Donot adjust thedisplay controls, heater
and airconditioner controlsoraudio con-
trols while driving sothat fullattention may
be given tovehicle operation.
. Ifyou noticed anyforeign objects entering
the system hardware, spilledliquidonthe
system, ornoticed smokeorfumes coming
out from thesystem, orany other unusual
operation isobserved, stopusing thesystem
immediately andcontact thenearest
NISSAN dealer.Ignoring suchconditions
may lead toan accident, fireorelectric
shock.
. Donot disassemble ormodify thissystem. If
you do,itmay lead toan accident, fire,or
electric shock.
CAUTION:
Do not use thesystem whentheengine isnot
running forextended periodsoftime toprevent
battery discharge.
GUID-6B02E F9F-9949-49 6A-B30C-81C99CB1D 952
JVH0829X
1. Display screen(P.4-4)
2. Fornavigation systemcontrolbuttons referto
the separate Navigation SystemOwner's Man-
ual.
3. INFO button (P.4-5)
4. Power/VOLUME dial(P.4-70)
5. Brightness control/display on´offbutton (P.4-4)
6. ENTER/Scroll dial(P.4-4)
7. BACK button (P.4-4)
8. SETUP button(P.4-5)
Display screen,heaterandairconditione r,and audio system
4-3
SAFETY
PRECAUTI ONS CENTER
MULTI-FUNCTI ON
CONTROL PANEL (models with
navigation system)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Backing upbehind aprojecting object
T32A1308 27-F39A09 CE-BA79-4 0A1-AF0D-07C3BEDF F944
JVH0247X
The position
*
C
is shown furtherthantheposition
*
B
in the display .However, theposition
*
C
is actually at
the same distance asthe position
*
A
. The vehicle
may hitthe object whenbacking uptothe position
*
A
if the object projects overtheactual backing up
course.
HOW TO ADJUST THESCREEN
GUID-EC79 F14B-6FF6-4 6AD-9BD8-9ECF9919E9F5
Adjusting screen(formodels withnavigation
system)
GUID-76C DE43F-B39B -4083-A190-7 BDE7FDF94E7
Operation withtouch screen:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Push theSETUP button.
2. Select theªSystemº key.
3. Select theªCamera DisplaySettingsº key.
4. Select theitem youwish toadjust.
. Display Mode:
Adjusts tofitthe level oflighting inthe vehicle.
T ouch theªDisplay Modeºkeytocycle through
options ofthe mode (Day,Night andAuto) .
. Brightness:
Adjusts thebrightness ofthe display .
. Contrast :
Adjusts thelevel ofcontrast.
. Color:
Adjusts thelevel ofthe color.
Operation withbuttons:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVH0649X
T o adjust thescreen brightness whentheRearView
Monitor isdisplayed, pushthebrightness control/ display
on´off
button
*
1
.
Adjust brightness tothe preferred settingusingthe
ENTER/Scroll dial
*
2
.
Adjusting screen(formodels without naviga-
tion system)
GUID-F6FEC 62C-0BA6-4A0D-88F6 -7221E5636A D6
JVH0653X
1. Push theENTER/SETTING button
*
2
.
2. Turn theTUNE´FOLDER dial
*
1
to highlight the
ªBrightnessº orthe ªContrastº key.
3. Push theENTER/SETTING button
*
2
.
4. Adjust thelevel using theTUNE´FOLDER dial
*
1
and then push theENTER/SETTING button
*
2
to
apply theadjustment.
NO TE:
Do not adjust theBrightness orContrast ofthe
RearView Monitorwhilethevehicle ismoving.
Display screen,heaterandairconditione r,and audio system
4-9
&RQGLWLRQ
([FHSWIRU&KLQD