light NISSAN XTERRA 2008 N50 / 2.G 06IT Navigation Manual

Black plate (91,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
3. Push<BACK>to return to the previous
screen.
Available route conditions
&1Short. Time (Blue):
Prioritizes by the shortest time.
&2Min. FWY (Red):
Minimizes the use of freeways.
&3Short. Dist. (Green):
Prioritizes by the shortest distance.
&4Map Scroll:
Displays a map screen where you can
confirm the location of the destination.
Even if you touch the map screen or operate
the directional buttons other than the up or
down button, the same map screen as when
[Map Scroll] is selected is displayed.
INFO:
.After you select a route, a preview is
displayed on the right side of the screen.
.The 3 routes may not always be different.
CONFIRMING A ROUTE
1. Highlight [Route Info.] and push<ENTER>.
2. Highlight the preferred information item and
push<ENTER>.
3. Push<BACK>to return to the previous
screen.
Available information
.Turn list:
Displays the details of the suggested route.
“Using turn list” (page 5-11)
.Preview:
Allows you to confirm the route by scrolling
on the map manually.
“Using route preview” (page 5-12)
.Simulation:
Allows you to view a simulation of the route.
“Confirming by simulation”
(page 5-12)
.Store route:
A calculated route can be stored. A max-
imum of 5 routes can be stored. Stored
routes can be easily retrieved and set as the
suggested route.
“STORING A ROUTE” (page 6-5)
Route guidance5-3

Black plate (92,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
.Map Scroll:
Displays a map screen where you can
confirm the location of the destination.
Even if you touch the map screen or operate
the directional buttons other than the up or
down button, the same map screen as when
[Map Scroll] is selected is displayed.
ADDING A DESTINATION OR WAY-
POINT
Before starting route guidance, you can add
destinations and/or waypoints. A total of 6
destinations or waypoints can be set.
1. Highlight [Add Way Pt.] and push
<ENTER>.
2. Set additional destinations or waypoints and
push<ENTER>.
INFO:
The method of searching for a location is the
same as the one for a destination.
“4. Setting a destination”
3. The selected location is displayed at the
center of the map. Highlight [Add to Route]
after confirming the location and push
<ENTER>.
INFO:
You can modify the location by selecting
[Alter Location]. The method of adjusting a
location is the same as the one for a
destination.
“ADJUSTING THE LOCATION OF
THE DESTINATION” (page 4-25)
4. Highlight [Destination] or [Waypoint] and
push<ENTER>.
The system starts calculating a route that
includes the added destination or waypoint.
When the calculation is finished, the route is
displayed.
5-4Route guidance

Black plate (93,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
INFO:
.If a waypoint was added, [More Routes]
cannot be selected.
.If a destination was added, the prior
destination becomes a waypoint.During route guidance, you can modify the route
conditions or confirm the route information. Set
the appropriate route condition according to
your purpose.
BASIC OPERATION
1. Push<ROUTE>.
2. Highlight the preferred setting item and
push<ENTER>.
3. Push<MAP>to return to the current
location map screen.
WARNING
Always stop the vehicle in a safe
location before modifying the route
conditions.
Modifying the route conditions while
driving may cause an accident.
Available setting items
.Cancel Route/Resume Route:
Allows you to cancel the current route
guidance. A cancelled route can also be
reactivated. If the suggested route is can-
celled, [Cancel Route Guidance] changes to
[Resume Route Guidance].
“DELETING/REACTIVATING A
ROUTE” (page 5-6)
.Edit:
Allows you to edit the route already set.
“EDITING A ROUTE” (page 5-7)
.Route Information:
Allows you to confirm the route by the route
information or simulation.
“CONFIRMING A ROUTE”
(page 5-11)
.Traffic Detour:
Allows you to manually search for an
alternative detour route taking the traffic
information into consideration.
“SEARCHING FOR A DETOUR
ROUTE TAKING TRAFFIC INFOR-
MATION INTO CONSIDERATION”
(page 5-12)
ROUTE SCREEN
Route guidance5-5

Black plate (94,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
.Route Settings:
Allows you to change the route calculation
conditions anywhere along the route.
“SETTING CONDITIONS FOR THE
ROUTE CALCULATION” (page 5-14)
.Recalculate:
You can manually search for the route again
after changing the search condition.
“RECALCULATE ROUTE”
(page 5-16)
.Detour:
If you want to detour from the suggested
route, you can calculate a route detouring for
a specified distance.
“SETTING A DETOUR ROUTE”
(page 5-17)
.Guidance Settings:
You can set various guidance information to
be displayed during route guidance and
activate or deactivate route and/or voice
guidance.
“ROUTE GUIDANCE SETTINGS”
(page 5-18)
DELETING/REACTIVATING A ROUTE
You can delete a route already set at any time. If
you delete a route, the destination and way-
points are also deleted.
It is also possible to reactivate the route that you
deleted.
Deleting a route
1. Push<ROUTE>.
2. Highlight [Cancel Route] and push
<ENTER>.
3. A confirmation message is displayed. High-
light [Yes] and push<ENTER>.
The route is deleted along with the destina-
tion and waypoints.
Setting by voice command
1. Push<TALK>located on the steering
switch.
2. After the tone sounds, speak a command.
To delete a route:
“Cancel Route”
Reactivating a route
1. Push<ROUTE>.
2. Highlight [Resume Route] and push
<ENTER>.
5-6Route guidance

Black plate (95,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
3. A confirmation message is displayed. High-
light [Yes] and push<ENTER>. The route
you have deleted is reactivated.
INFO:
If you set a new route, the deleted route cannot
be reactivated.
EDITING A ROUTE
1. Push<ROUTE>.
2. Highlight [Edit] and push<ENTER>.3. Highlight the preferred condition and push
<ENTER>.
4. Push<BACK>to return to the previous
screen. Push<MAP>to return to the
current location map screen.
Available setting items
&1Current destination:
Allows you to change or delete the destina-
tion.
“Editing/deleting a destination or way-
point” (page 5-9)
&2Current waypoint:
Allows you to change or delete the way-
point.
“Editing/deleting a destination or way-
point” (page 5-9)
&3Condition for calculating a route to the
destination:
Allows you to change the conditions for
calculating a route to the destination.
“Changing route calculation conditions”
(page 5-10)
&4Condition for calculating a route to a
waypoint:
Allows you to change the conditions for
calculating a route to a waypoint.
“Changing route calculation condi-
tions” (page 5-10)
&5Allows you to add a destination.“Setting a destination or waypoint”
(page 5-8)
&6Allows you to add a waypoint.“Setting a destination or waypoint”
(page 5-8)
Route guidance5-7

Black plate (96,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
Setting a destination or waypoint
You can add a destination or waypoint to the
route already set. A total of 6 destinations or
waypoints can be set.
1. Push<ROUTE>.
2. Highlight [Edit] and push<ENTER>.
3. Highlight [Destination] or [Waypoint] and
push<ENTER>.
INFO:
If you select [Destination], the current
destination changes to a waypoint.
4. Set a destination or waypoint. The method of
searching for a destination or waypoint is the
same as the one for a destination.
“4. Setting a destination”
5. The selected location is displayed at the
center of the map. Highlight [Add to Route]
after confirming the location and push
<ENTER>.
INFO:
Even after setting a destination/waypoint,
you can adjust the destination/waypoint
location, store the route, etc.
“OPERATIONS AFTER SETTING A
DESTINATION” (page 4-24)
6. Return to the Edit Route screen. Set the
route conditions as necessary.
7. Push<MAP>to return to the current
location map screen. The route you have
set is automatically displayed.
INFO:
The prior route is automatically deleted.
5-8Route guidance

Black plate (97,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
Editing/deleting a destination or way-
point
You can modify or delete the destination or
waypoint already set.
INFO:
If you modify or delete a location when a
suggested route is already set, the prior
suggested route will be recalculated accord-
ingly.
1. Push<ROUTE>.
2. Highlight [Edit] and push<ENTER>.
3. Highlight a destination or waypoint that is
already set and push<ENTER>.
4. Highlight [Move Dest.] to modify the location
and push<ENTER>.
“ADJUSTING THE LOCATION OF
THE DESTINATION” (page 4-25)
5. Highlight [Delete] and push<ENTER>to
delete the location.
6. A confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push<ENTER>. The destination
or waypoint is deleted from the route.
INFO:
.If the destination is deleted, the final
waypoint of the route becomes the destina-
tion.
.Even if you touch the map screen or operate
the directional buttons other than the up or
down button, the same map screen as when
[Move Dest.] is selected is displayed.
Route guidance5-9

Black plate (98,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
Changing route calculation conditions
Each section of the route between waypoints
can have different route calculation conditions.
After setting these conditions, you can recalcu-
late the entire route.
1. Push<ROUTE>.
2. Highlight [Edit] and push<ENTER>.
3. Highlight the preferred section of the route
to the destination or waypoint and push
<ENTER>.
4. Highlight the preferred condition and push
<ENTER>.
Available conditions:
: Fastest Route
: Minimize Freeway
: Shortest Route
5. The system automatically recalculates a
route according to the conditions set.The screen will automatically return to the
[Edit] screen after route calculation.
6. The icon corresponding to the set route
condition is displayed. Push<MAP>to
return to the current location map screen.
INFO:
.The recalculated route may not be the
shortest route because the system priori-
tizes easy-to-drive roads for safety reasons.
.If you set the route conditions from [Route
Settings], all sections in the route are
subject to the same route conditions even
though you have set different route condi-
tions for different sections in [Edit].
5-10Route guidance

Black plate (99,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
CONFIRMING A ROUTE
When the suggested route is displayed after
calculation, you can confirm the route informa-
tion or simulate the suggested route.
Basic operation
1. Push<ROUTE>.
2. Highlight [Route Information] and push
<ENTER>.
3. Highlight the preferred item and push
<ENTER>.Available items:
.Turn List:
Displays the details of the suggested route.
“Using turn list” (page 5-11)
.Preview:
Allows you to confirm the suggested route
by scrolling the map.
“Using route preview” (page 5-12)
.Simulation:
Allows you to simulate the suggested route.
This function provides a detailed image of
the route with voice guidance.
“Confirming by simulation”
(page 5-12)
.Store Route:
A calculated route can be stored. A max-
imum of 5 routes can be stored. Stored
routes can be easily retrieved and set as the
suggested route.
“STORING A ROUTE” (page 6-5)
.Map Scroll:
Displays a map screen where you can
confirm the location of the destination.
Even if you touch the map screen or operate
the directional buttons other than the up or
down button, the same map screen as when
[Map Scroll] is selected is displayed.
Setting by voice command
1. Push<TALK>located on the steering
switch.
2. After the tone sounds, speak a command.
To display the route information:
“Route Information”
Using turn list
1. Highlight [Turn List] and push<ENTER>.
2. You can confirm the information (e.g., inter-
sections) on the route to the destination by
scrolling the screen using the up and down
switches of the main directional buttons or
the center dial.
3. Push<MAP>to return to the current
location map screen.
Route guidance5-11

Black plate (100,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
Using route preview
1. Highlight [Preview] and push<ENTER>.
2. Highlight the preferred key and push
<ENTER>.
: Goes forward in the direction of the
destination.
: Goes backward in the direction of
the starting point.
: Pauses the route preview.
3. Push<MAP>to cancel the preview and
return to the current location map screen.
INFO:
During route preview, you can change the map
scale by pushing<ZOOM IN>or<ZOOM
OUT>.While the map scale is being changed, the route
preview is temporarily stopped.
Confirming by simulation
1. Highlight [Simulation] and press<ENTER>.
2. Highlight the preferred key and push
<ENTER>.
: Pauses the simulation.
: Resumes the simulation.
: Ends the simulation.
3. Push<MAP>to cancel the simulation and
return to the current location map screen.
INFO:
During simulation, you can change the map
scale by pushing<ZOOM IN>or<ZOOM
OUT>.While the map scale is being changed, the
simulation is temporarily stopped.
SEARCHING FOR A DETOUR ROUTE
TAKING TRAFFIC INFORMATION INTO
CONSIDERATION
When a serious traffic event occurs on the route,
or if the system finds a faster route, a detour alert
will pop up automatically. If you miss the
automatic alert, you can also manually search
for a detour.
1. Push<ROUTE>.
2. Highlight [Traffic Detour] and push
<ENTER>.
5-12Route guidance