set clock OLDSMOBILE BRAVADA 1996 Owners Manual

Endgate
A CAUTION:
It can be dangerous to drive with the rear
window or endgate open because carbon
monoxide (CO) gas can come into your vehicle.
You can’t see
or smell CO. It can cause
unconsciousness and even death.
If you must drive with the rear window or
endgate open or if electrical wiring or other cable
connections must pass through the seal between
the body and the rear window or endgate:
0 Make sure all windows are shut.
Turn the fan on your heating or cooling
system to its highest speed with the setting
on VENT. That will force outside air into
your vehicle. See “Comfort Controls’’ in
the Index.
instrument panel, open them all the
way.
If you have air outlets on or under the
See “Engine Exhaust” in the Index.
Endgate Release
There are several ways to release the endgate. However,
the endgate glass will not release if the vehicle
is in gear.
You can use
you key to unlock the endgate from the
outside. Insert
the key in the endgate lock button and
turn it counterclockwise. All doors will unlock.
You may also use the Keyless Entry system
described earlier.
The endgate can be opened without a key if the driver’s
door is unlocked.
ProCarManuals.com

Temperature Knob
The upper knob regulates the temperature of the air
coming through the system. Turn the knob clockwise
for warmer air. Turn the knob counterclockwise for
cooler air.
Mode Knob
The lower knob allows you to choose the direction of
air delivery.
OFF: This setting turns the system off. Some outside air
will still enter the vehicle whenever the vehicle is
moving forward.
MAX A/C: This setting provides maximum cooling
with the least amount
of work. MAX A/C recirculates
much
of the air inside your vehicle so it cools quickly.
A/C: This setting cools the air entering your vehicle and
directs
it through the instrument panel outlets.
+fl BI-LEVEL A/C: Air is delivered through
the heater floor outlets
as well as the instrument
panel outlets.
fl VENT This setting directs airflow through the
instrument panel outlets. The air conditioning
compressor is not working when
VENT is selected.
+.
+0
0
+’ HEATER: This setting directs warmed air through
the heater floor outlets and windshield defroster outlets.
+fl BLEND: Airflow is divided equally between the
heater floor outlet
and the windshield defroster outlets.
9 DEFROST This setting directs most air through
the windshield defroster outlets and some through the
heater outlets.
w.
3-2
ProCarManuals.com

Air Conditioning Heating
On hot
days, open the windows long enough to let hot
inside air escape. This reduces the time it takes for your
vehicle to cool down. Then keep your windows closed
for the air conditioner to work its best.
For quick cool-down
on very hot days, use MAX A/C
with the temperature knob turned counterclockwise.
This setting should be used to keep odors and/or dust
from entering the vehicle. For normal cooling on hot
days, use A/C with the temperature knob turned
counterclockwise.
On cool but sunny days, use
BI-LEVEL A/C to deliver
warm air to the floor and cooler air to the instrument
panel outlets.
When the air conditioner is on, you may sometimes
notice slight changes in your vehicle’s engine speed
and power.
This is normal because the system is
designed to cycle the compressor on and off to keep
the desired temperature. The
heater works best if you keep your windows closed
while using it. On cold days, use HEATER with the
temperature knob turned clockwise.
BLEND is useful in
cool weather when you have fog or ice on the
windshield or side windows.
If you use the optional engine coolant heater before
starting your engine, your heating system will produce
warmer air faster to heat the passenger compartment in
cold weather. See “Engine Coolant Heater” in the Index.
Ventilation System
For mild outside temperatures when little heating or
cooling is needed, use VENT to direct outside air
through your vehicle. Airflow is through the instrument
panel outlets.
Your vehicle’s ventilation system supplies outside air to
the inside
of your vehicle when it is moving. When the
vehicle is not moving, you can get outside air to flow
through by selecting any mode and any fan speed.
3-3
ProCarManuals.com

Audio Systems
Your Delco@ audio system has been designed to operate
easily and give years of listening pleasure.
You will get
the most enjoyment out of it if
you acquaint yourself
with it first. Find out what your Delco system can do
and how to operate all its controls, to be sure you're
getting the most out
of the advanced engineering that
went into it.
Setting the Clock for AM-FM Stereo with
Cassette Tape Player with Equalizer
Press SET. Within five seconds, press and hold SEEK
until the correct minute appears
on the display. Press and
hold
SCAN until the correct hour appears on the display.
Setting the Clock for AM-FM Stereo with
Compact Disc Player
Press SET. (The radio may be on or off.) Within five
seconds, press the SEEK right
or left arrow until the
correct minute appears on the display. Press and hold
SCAN until the correct hour appears on the display.
AM-FM Stereo with Cassette Tape Player
with Equalizer
Playing the Radio
PWR-VOL-PROG-RCL:
This knob turns the system
on and off and controls the volume. Press the knob to
display the time
with the ignition off, to switch between
the clock and radio when the radio is on, and to go from
one side of
the tape to the other when a tape is playing.
ProCarManuals.com

AM-FM Stereo with Compact Disc Player
(Option)
Playing the Radio
POWER-VOL:
This knob turns the system on and off
and controls the volume when
the ignition is on. Volume
is displayed unless BAL, FADE,
BASS or TREB
are adjusted.
MUTE: Press this button to stop all sound from the
radio or compact disc player. Press MUTE again to
resume sound.
RCL: Press this button to display the time with the
ignition off and to switch between
the clock and radio
when
the radio is on.
3-9
Finding a Station
TUNE-BAND:
Turn this knob to tune in radio stations.
Press
it to switch between AM and FM. AM or FM will
show briefly on the display.
SEEK: Press the right arrow to go to the next higher
station and the left arrow to
go to the next lower station.
SCAN: Press this button to listen to each station for a
few seconds. SC will appear on the display. The radio
will go
to the next station, stop for a few seconds, then
go to the next station. Press
SCAN again to stop
scanning and stay at
a station.
PUSHBUTTONS: The five numbered pushbuttons
let you return to your favorite stations. They are also
used when you play
a compact disc. You can set up to
10 stations (five AM and five FM).
1. Tune in the desired station.
2. Press SET. (SET appears on the display.)
3. Press one of the five pushbuttons, within five seconds,
to store the station. Whenever you press that numbered
button, the station
you set will return.
4. Repeat the steps for each pushbutton.
ProCarManuals.com

Q.’ What should I do if my vehicle stalls, or is about
A: If this happens, there are some things you should
to stall, and I can’t make it up the hill?
0
0
0
0
do, and there are some things you must not do.
First, here’s what you
should do:
Push the brake pedal to stop the vehicle and keep
it
from rolling backwards. Also, apply the parking brake.
If your engine is still running, shift the transmission
to REVERSE (R), release the parking brake, and
slowly back down the hill in REVERSE
(R).
If your engine has stopped running, you’ll need to
restart
it. With the brake pedal depressed and the
parking brake still applied, shift the transmission to
PARK (P) and restart the engine. Then, shift
to
REVERSE (R), release the parking brake, and
slowly back down the hill as straight as possible
in
REVERSE (R).
As you are backing down the hill, put your left hand
on the steering wheel at the 12 o’clock position. This
way, you’ll be able to tell
if your wheels are straight
and maneuver as you back down. It’s best that you
back down the
hill with your wheels straight rather
than in the left or right direction. Turning the wheel
too far to the
left or right will increase the possibility
of a rollover. Here are some things
you
must not do if you stall, or are
about
to stall, when going up a hill.
Never attempt to prevent a stall by shifting into
NEUTRAL
(N) to “rev-up7’ the engine and regain
forward momentum. This won’t work. Your vehicle
will roll backwards very quickly and you could go
out
of control.
Instead, apply the regular brake to stop the
vehicle. Then apply the parking brake. Shift to
REVERSE (R), release the parking brake, and
slowly back straight down.
Never attempt to turn around if you are about to stall
when going up a
hill. If the hill is steep enough to
stall your vehicle, it’s steep enough to cause you to
roll over
if you turn around. If you can’t make it up
the hill, you must back straight down the hill.
Suppose, after stalling, I try to back down the hill
and decide
I just can’t do it. What should I do?
A: Set the parking brake, put your transmission in
PARK (P) and
turn off the engine. Leave the
vehicle and go get some help. Exit on the uphill
side and stay clear of the path the vehicle would
take if it rolled downhill.
ProCarManuals.com

Brakes Adjustment
.................................. 6-29
Master Cylinder
.............................. 6-25
PedalTravel
................................. 6-29
Replacing System Parts
........................ 6-29
Trailer
...................................... 4-47
Wear
....................................... 6-28
Brake System Warning Light
...................... 2-53
Brake-Transmission Shift Interlock Check
........... 7-4 1
Braking ........................................ 4-5
In Emergencies ................................ 4-8
Brightness Control
.............................. 2-32
BTSICheck
................................... 7-41
Bulb Replacement
.............................. 6-30
Lapacities and Specifications
............... 6.57. 6.58
Carbon Monoxide
................ 2-7.2.21.4.40. 4.48
Cargocover
................................... 2-39
Cargo Tie Downs
............................... 2-39
Cassette Tape Player
............................. 3-6
Care
.................................. 3-14, 7-39
Center Seat Positions
............................ 1-36
Certification/Tire Label
.......................... 4-4 I
Chains
Safety
...................................... 4-47
Tire
........................................ 6-43
Changing
a Flat Tire ............................. 5-20
Charging System Light
.......................... 2-S 1
Check Gages Light .............................. 2-59
Checking Your Restraint Systems
.................. 1-42
Chemical Paint Spotting
.......................... 6-50
Child Restraints
................................ 1-32
Securing
in a Rear Outside Seat Position ........... 1-34
Securing
in the Right Front Seat Position ........... 1-36
TopStrap
................................... 1-33
Where to
Put ................................ 1-32
Cigarette Lighter
............................... 2-41
Circuit Breakers and Fuses
....................... 6-53
Cleaner.
Air ................................... 6-13
Cleaning
Aluminum Wheels ............................ 6-49
Fabric
...................................... 6-45
Glass ....................................... 6-47
Inside of Your Vehicle
......................... 6-44
Instrument Panel
............................. 6-46
Leather
..................................... 6-46
Outside of Your Vehicle
........................ 6-48
Stains
...................................... 6-45
Tires
....................................... 6-49
Vinyl ....................................... 6-46
Weatherstrips
................................ 6-47
Wheels
..................................... 6-49
Windshield. Backglass and Wiper Blades
.......... 6-47
Climate Control System
........................... 3-1
Clock
. Setting ................................... 3-6
Comfort Controls
................................ 3-1
9-2
ProCarManuals.com