lock PEUGEOT 206 2008 User Guide

47
COMFORT
-
FRONT SEATS It is impossible to access the
rear seats if the front seat is in a
reclining position.
B. Place your ingers in one of the
two handles and push forwards
to fold down the seat back. The
seat does not move forward.
When put back, the seat back
returns to its initial angle.
Never drive with the head
restraints removed; they
should be in place and
correctly adjusted.
"Comma" type rear head restraints
These have one position for when
they are in use (high) and a storage
position (low). They can be removed.
To lower the head restraints, press
the lug.
To remove them, pull upwards as far
as the stop then press the release
control.
1 - Forwards-backwards
adjustment
Lift the control and slide the seat for-
wards or backwards.
2 - Head restraint height and angle adjustment
To raise the restraint, pull it upwards.The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.
The head restraint is itted with a
frame with notches, which prevent
the head restraint dropping down
(this is a safety device in the case of
impact).
To lower the head restraint, it is nec -
essary to push simultaneously:
- the button located on the left- hand guide at the base of the
head restraint frame,
- the head restraint downwards.
To remove the head restraint, press
the lug.
The head restraint angle can also be
adjusted. 3 - Access to the rear seats
(3-door), A or B according to
version
A. Place your ingers in one of the
two handles and push forwards
to fold down the seat back and
move the seat forwards.
When put back, the seat returns
to its initial position.
No person or object must
prevent the seat from returning
to its initial position. Returning to
this position is necessary for it to
be locked. 4 - Height adjustment
Pull the handle upwards.
Remove your weight from the seat to
raise, or press on the seat to lower.
5 - Seat back angle adjustment
Push the handle towards the rear.

COMFORT
48 -
- position the seat belt under the
belt holder 2,
- pull control 3 to unlock the seat
back 4,
- remove or lower the head restraint,
- tilt the seat back 4.
Always start with the seat, never
the seat back (risk of damage).
REAR SEATS
To fold the rear seats:- lift the front of the seat cushion 1,
- tilt the seat cushion 1 against the
front seats, When repositioning:
- return the seat back to the
upright position,
- fold back the seat cushion,
- reposition the buckles before locking the front of the seat
cushion.
Take care not to trap the seat belts.

49
COMFORT
-
- position the seat belt under the
belt holder 2,
- pull the controls 3 to unlock the
seat back 4,
- remove or lower the head
restraints,
- tilt the seat back 4.
Always start with the seat, never
the seat back (risk of damage).
BENCH SEAT
To fold the bench seat:- lift the front of the seat cushion 1,
- tilt the seat cushion 1 against the
front seats, When repositioning:
- return the seat back to the
upright position,
- fold back the seat cushion,
- reposition the buckles before locking the front of the seat
cushion.
Take care not to trap the seat
belts.

49
COMFORT
-
- position the seat belt under the
belt holder 2,
- pull the controls 3 to unlock the
seat back 4,
- remove or lower the head
restraints,
- tilt the seat back 4.
Always start with the seat, never
the seat back (risk of damage).
BENCH SEAT
To fold the bench seat:- lift the front of the seat cushion 1,
- tilt the seat cushion 1 against the
front seats, When repositioning:
- return the seat back to the
upright position,
- fold back the seat cushion,
- reposition the buckles before locking the front of the seat
cushion.
Take care not to trap the seat
belts.

57
ACCESS
-
KEYS
The keys allow you to switch on the
ignition and independently oper-
ate the passenger air bag disarming
switch and the steering lock. Locating your vehicle
To locate your vehicle, if you have
locked it, in a car park:
F
press button A, the courtesy
lights come on and the direction
indicators lash for a few
seconds.
Changing the remote control
battery
Battery ref.: CR2016/3 volts.
Warning that the battery is lat is given
by an audible signal accompanied by
the message "Remote control bat-
tery low" on the multifunction display.
To replace the battery, remove the
screw then unclip the casing using a
coin at the ring.
If the remote control does not work
after the battery has been changed,
reprogramme the remote control.
Key in ignition
A buzzer sounds on opening the
driver’s door, if the key has been left
in the ignition. Programming the remote
control
F
Switch off the ignition.
F Switch the ignition on again.
F Press button A immediately for a
few seconds.
F Switch off the ignition and
remove the remote control
key from the ignition lock. The
remote control is now working
again.
Without central locking/
unlocking by hand
The keys also allow you to unlock/
lock the front doors, the boot and the
fuel iller cap.
With central locking/
unlocking
The keys allow you to lock or unlock
all of the doors and the tailgate, from
the front doors.
If one of the doors or the tailgate is
open, the central locking does not
work. With central locking/
unlocking via the remote
control
Press button
A to lock the vehicle.
This is conirmed by ixed lighting of
the direction indicators for approxi-
mately two seconds.
Press button B to unlock the vehicle.
This is conirmed by the rapid lash -
ing of the direction indicators.
Avoid pressing the buttons of your
remote control out of range of your
vehicle. You risk causing it not to
work and the remote control would
then have to be reprogrammed (see
corresponding section).

ACCESS
58 -
ELECTRONIC ENGINE
IMMOBILISER
This locks the engine control sys-
tem as soon as the ignition has been
switched off and therefore prevents
starting of the vehicle by anyone who
does not have the key.
The ignition key has an electronic
chip which has a special code. When
the ignition is switched on, the code
must be recognised for starting to be
possible.
Make a careful note of the
number of each key. This
number is coded on the la-
bel attached to the key.
The high frequency remote control
is a sensitive system; do not oper -
ate it while it is in your pocket as
there is a possibility that it may un-
lock the vehicle, without you being
aware of it.
The remote control does not oper-
ate when the key is in the ignition,
even when the ignition is switched
off, except for reprogramming.
Driving with the doors locked may
make access to the passenger
compartment by the emergency
services more dificult in an emer -
gency.
As a safety precaution (with children
on board), remove the key from the
ignition when you leave the vehicle,
even for a short time. Do not repeatedly press the buttons
of your remote control out of range
of your vehicle.
You run the risk of stopping it from
working and the remote control
would have to be reprogrammed.
When purchasing a second-hand ve-
hicle, have the key codes memorised
by a PEUGEOT dealer, to ensure that
the keys in your possession are the
only ones which can start the vehicle.
Do not make any modiications to
the electronic engine immobiliser
system.
If the system does not function
correctly,
the central locking button
indicator light, situated in the centre
of the fascia, lashes rapidly when the
ignition is switched on (2nd notch).
In this case your vehicle will not
start.
Contact a PEUGEOT dealer as soon
as possible. If the keys are lost
Visit a PEUGEOT dealer with the ve
-
hicle's V5 registration certiicate and
your personal identiication docu -
ments.
The PEUGEOT network will be able
to retrieve the key code and the
transponder code to order a replace-
ment key.

117
SPECIAL FEATURES
-
DEADLOCKING
Deadlocking the doors is an addition-
al security device. When it is used it
means that the interior and exterior
door locking controls cannot open
the doors.
There are two methods of
operation:
- with the ignition key, using the
driver’s door lock;
- with the remote control, which has two buttons:
A. Deadlocking/locking of the
doors and tailgate.
B. Unlocking. Using the key
To deadlock,
turn the key towards
the rear of the vehicle.
To lock, within 5 seconds of dead -
locking, turn the key once more
towards the rear of the vehicle.
To unlock, turn the key towards the
front of the vehicle.
Using the remote control
To deadlock
Press once on button A to deadlock
the vehicle.
This is indicated by ixed lighting of
the direction indicators for approxi-
mately two seconds.
A second press on button A within
ive seconds of deadlocking changes
this to normal locking.
This is indicated by ixed lighting of
the direction indicates for approxi-
mately two seconds.
To unlock
Press once on button B to unlock the
vehicle.
This is indicated by rapid lashing of
the direction indicators.
After deadlocking the ve-
hicle, the doors can be
unlocked only from the out-
side of the vehicle: if any-
one is inside the vehicle,
unlocking is impossible from inside.
If the battery has been discon-
nected:
- The deadlocking remains ac- tive.
- It is possible to open one of the front doors with the ignition
key, but the key only opens
the corresponding door.
It is dangerous to operate the
deadlocking if there is someone
inside the vehicle.
Keep your key number in a safe
place. In the case of loss or theft,
this will enable you to obtain a
new key.
Check that the batteries are still
charged.

ACCESS
58 -
ELECTRONIC ENGINE
IMMOBILISER
This locks the engine control sys-
tem as soon as the ignition has been
switched off and therefore prevents
starting of the vehicle by anyone who
does not have the key.
The ignition key has an electronic
chip which has a special code. When
the ignition is switched on, the code
must be recognised for starting to be
possible.
Make a careful note of the
number of each key. This
number is coded on the la-
bel attached to the key.
The high frequency remote control
is a sensitive system; do not oper -
ate it while it is in your pocket as
there is a possibility that it may un-
lock the vehicle, without you being
aware of it.
The remote control does not oper-
ate when the key is in the ignition,
even when the ignition is switched
off, except for reprogramming.
Driving with the doors locked may
make access to the passenger
compartment by the emergency
services more dificult in an emer -
gency.
As a safety precaution (with children
on board), remove the key from the
ignition when you leave the vehicle,
even for a short time. Do not repeatedly press the buttons
of your remote control out of range
of your vehicle.
You run the risk of stopping it from
working and the remote control
would have to be reprogrammed.
When purchasing a second-hand ve-
hicle, have the key codes memorised
by a PEUGEOT dealer, to ensure that
the keys in your possession are the
only ones which can start the vehicle.
Do not make any modiications to
the electronic engine immobiliser
system.
If the system does not function
correctly,
the central locking button
indicator light, situated in the centre
of the fascia, lashes rapidly when the
ignition is switched on (2nd notch).
In this case your vehicle will not
start.
Contact a PEUGEOT dealer as soon
as possible. If the keys are lost
Visit a PEUGEOT dealer with the ve
-
hicle's V5 registration certiicate and
your personal identiication docu -
ments.
The PEUGEOT network will be able
to retrieve the key code and the
transponder code to order a replace-
ment key.

SPECIAL FEATURES
118 -
ALARM
Setting and deactivating the
alarm system
Switching off the siren.
The alarm completes the security
equipment for your vehicle. It offers
two types of protection.
- external protection: when it is
set, the alarm sounds if one of
the doors, the boot or the bon-
net is opened;
- internal protection: when it is set,
the alarm sounds if the sensors
detect air movement in the pas-
senger compartment (a broken
window), or movement within
the car.
The alarm also has an anti-tamper
function.
If there is an attempt to tamper with
the wires to the siren, control unit or
the battery, the siren sounds and the
direction indicators light. Setting the alarm (external and
internal protection)
Switch the ignition off and get out
of the vehicle.
Deadlock the vehicle.
The doors lock.
The direction indicators light for
two seconds.
The red light on the switch lashes
once a second.
5 seconds later, internal protection is
set.
45 seconds later, external protection
is set.
Note:
when the alarm is triggered,
the siren sounds for thirty seconds.
After the thirty seconds it stops, but
the alarm remains set.
When the alarm is trig-
gered, if a door, the tail -
gate or bonnet is not
closed correctly, the siren
sounds for a moment. If
the vehicle is closed correctly in the
following 45 seconds, the alarm is
activated and the direction indica-
tors remain on for two seconds. In
all cases, the alarm is activated af -
ter 45 seconds.
Disarming the alarm
(external and internal protection)
Press the unlocking button of the
remote control key.
The doors unlock.
The direction indicators lash for
two seconds.
The red light on the switch goes out.
Note: if the warning light continues to
lash after de-activation of the alarm,
it is a sign that the alarm has been
triggered. The lashing will stop when
the ignition is switched on.

119
SPECIAL FEATURES
-
Emergency cut-off
(if the remote control is not
working)
Unlock the doors with the key.
Open the door.
The alarm is triggered.
- Turn on the ignition.
- The locking system recognises
the key.
- The siren stops and the alarm is disarmed. Selection of the type of
protection
To set the alarm to external
protection only.
If you want to leave a window partial
-
ly open, or a pet inside the vehicle,
you need to select external protec-
tion only:
- Switch off the ignition.
- Within the next ten seconds, press the internal protection but-
ton 1 until the warning light comes
on continuously.
- Get out of the vehicle.
- Deadlock the vehicle.
- The doors lock.
- The direction indicators light for two seconds.
-
The red light on the switch lashes
once a second.
To de-activate external protection
only
Press the unlocking button on the
remote control.
The doors unlock.
The direction indicators lash for
two seconds.
The red light on the switch goes out. To lock the vehicle without setting
the alarm
It is the remote control which sets the
alarm.
Therefore, to lock the vehicle without
setting the alarm: use the key.
To recharge or replace the
battery:
- Turn on the ignition.
- You have 10 seconds after turn-
ing on the ignition to press the
internal protection switch 1 and
hold it down for two seconds.
- The warning light lashes rapidly for three seconds.
-
You can now disconnect the battery.
After reconnecting the battery: