display Peugeot 206 Dag 2008 User Guide
Page 24 of 123
MULTIFUNCTION DISPLAYS
26 -
CLOCKAdjusting the parameters
Press and hold button 1 for two sec-
onds to access the settings; the data
l a s h e s , i n d i c a t i n g i t i s r e a d y t o b e
m o d i i e d .
T h e n , e a c h p r e s s o f b u t t o n 1 scrolls
through the various data in the fol-
lowing order:
- language of information d i s p l a y e d ,
- h o u r s ( 1 2 t h e n 2 4 h o u r m o d e ) ,
- m i n u t e s ,
- y e a r ,
- m o n t h ,
- d a y ,
- u n i t o f t e m p e r a t u r e
( d e g r e e s C e l s i u s o r F a h r e n h e i t ) .
Pressing button 2 a l l o w s m o d i i c a t i o n
o f t h e d a t a s e l e c t e d . P r e s s a n d h o l d
f o r r a p i d a d v a n c e ( r e t u r n t o s t a r t a f t e r
t h e l a s t p o s s i b l e v a l u e ) .
A f t e r 7 s e c o n d s w i t h n o a c t i o n , t h e
m a i n d i s p l a y r e t u r n s ; t h e m o d i i e d
d a t a a r e n o w r e c o r d e d .
Note: Pressing button 2 b r i e l y d i s -
p l a y s t h e o u t s i d e t e m p e r a t u r e f o r a
f e w s e c o n d s .
Button
1 : hour adjustment
Button 2 : minute adjustment
P r e s s a n d h o l d t h e b u t t o n f o r r a p i d
a d v a n c e .DISPLAY A
T h i s d i s p l a y s t h e f o l l o w i n g
information:
- t h e t i m e ,
- t h e d a t e ,
- t h e o u t s i d e t e m p e r a t u r e ( t h i s l a s h e s i f t h e r e i s a r i s k o f i c e ) ,
- t h e a u d i o s y s t e m d i s p l a y s ,
- a d o o r c h e c k
( e . g . : ' ' l e f t f r o n t d o o r o p e n ' ' ) ,
- warning messages ( e . g . ' ' r e m o t e c o n t r o l b a t t e r y
l a t ' ' ) o r i n f o r m a t i o n m e s s a g e s
( e . g . ' ' e c o n o m y m o d e a c t i v e ' ' ) ,
d i s p l a y e d t e m p o r a r i l y .
Page 25 of 123
27
MULTIFUNCTION DISPLAYS
-
Setting the parameters
Press button 1 for two seconds to
a c c e s s t h e s e t t i n g s . T h e i n f o r m a -
t i o n l a s h e s t o s h o w i t i s r e a d y t o b e
m o d i i e d .
T h e n , i n d i v i d u a l p r e s s e s o n b u t t o n
1 a l l o w y o u t o s c r o l l t h r o u g h t h e v a r i -
ous data in the following sequence:
- language in which the i n f o r m a t i o n i s d i s p l a y e d ,
- u n i t o f d i s t a n c e ( k m s o r m i l e s ) ,
- u n i t o f t e m p e r a t u r e ( d e g r e e s C e l s i u s o r F a h r e n h e i t ) ,
- time format (12 then 24 hour m o d e ) ,
- h o u r ,
- m i n u t e s ,
- y e a r ,
- m o n t h ,
- d a y .
Pressing button 2 a l l o w s y o u t o c h a n g e
t h e i n f o r m a t i o n s e l e c t e d . M a i n t a i n t h e
p r e s s u r e f o r r a p i d s c r o l l i n g .
A f t e r 7 s e c o n d s w i t h o u t o p e r a t i o n ,
the screen returns to the normal
d i s p l a y a n d t h e m o d i i e d d a t a i s
r e c o r d e d . MONOCHROME DISPLAY B
This enables the following informa-
t i o n t o b e d i s p l a y e d :
- t h e t i m e ,
- t h e d a t e ,
- t h e o u t s i d e t e m p e r a t u r e ( t h i s l a s h e s w h e n t h e r e i s a r i s k o f i c e ) ,
- t h e r a d i o d i s p l a y s ,
- t h e s t a t u s o f t h e d o o r s . T h e d i s p l a y s h o w s y o u , b y m e a n s
o f a g r a p h i c , w h e t h e r a d o o r i s
o p e n ,
- the warning messages ( e . g . ' ' b a t t e r y c h a r g e f a u l t ' ' ) o r
i n f o r m a t i o n m e s s a g e s ( e . g .
" f u e l l e v e l l o w ' ' ) , d i s p l a y e d
t e m p o r a r i l y , c a n b e c l e a r e d b y
p r e s s i n g b u t t o n 1 or 2 ,
- t h e t r i p c o m p u t e r .
Page 28 of 123
AUDIO EQUIPMENT
30 -
GENERAL FUNCTIONS AUDIO SETTINGS
Adjusting the loudness
This function automatically empha-
sises bass and treble tones. Press
button I or J to switch the function on
or off.
On/off
With the ignition key
in the accessories or
ignition position, press
button
A to switch the
set on or off.
The set can ope-
rate for 30 minutes
without the vehicle ignition being
switched on.
Anti-theft system
The audio system is coded in such a
way that it can operate only on your
v e h i c l e . I t w o u l d n o t f u n c t i o n i f i t t e d
to another vehicle.
The anti-theft system is automatic
and requires no action on your part.ADJUSTING THE
VOLUME
Press button C to increase the vol-
ume, or button B to decrease it.
Continuous pressure on buttons C
and B allows a gradual adjustment of
the volume. Adjusting the bass
Adjusting the treble
When
"TREB" is displayed, press
button I or J to vary the setting.
- "TREB -9" for a minimum treble
setting,
- "TREB 0" for a normal setting,
- "TREB +9" for a maximum
treble setting.
Press button
H sev-
eral times in succes-
sion to access the bass
(BASS) , treble (TREB) ,
loudness (LOUD), fader
(FAD) , balance (BAL)
and automatic volume
correction settings.
Exit from audio mode is automatic
after a few seconds without pressing
any button, or by pressing button H
a f t e r c o n i g u r a t i o n o f t h e a u t o m a t i c
volume correction.
Note : bass, treble and loudness set-
t i n g s a r e s p e c i i c t o e a c h s o u r c e . I t
is possible to set them differently for
radio, CD and CD changer. When
"BASS" is dis-
played, press button
I or J to vary the set-
ting.
- "BASS -9" for a
minimum bass
setting,
- "BASS 0" for a normal setting,
- "BASS +9" for a maximum bass
setting.
Page 29 of 123
31
AUDIO EQUIPMENT
-
RADIOSelecting radio mode
Selecting a waveband
Adjusting the front/rear sound
distribution (Fader)
When
"FAD" is displayed, press but-
ton I or J.
Button I increases the volume in the
front.
Button J increases the volume in the
rear.
Adjusting the right/left sound
distribution (Balance)
When "BAL" is displayed, press but-
ton I or J.
Button I increases the volume on the
right-hand side.
Button J increases the volume on the
left-hand side.
Automatic volume
correction
This function enables the volume to
be automatically adjusted depending
on the level of noise produced by the
speed of the vehicle.
Press buttons I or J to switch the
function on or off. Press button
R.
B r i e l y p r e s s b u t t o n
R to select the FM1,
FM2 FMast and AM
wavebands.
Notes on radio reception
Your car radio is subject to phenom-
ena which do not affect domestic ra-
dio sets. Both AM (MW/LW) and FM
reception are subject to various forms
o f i n t e r f e r e n c e . T h i s i s n o r e l e c t i o n o n
the quality of the equipment, but is due
to the nature of the signals and the way
in which they are transmitted.
On MW/LW, interference may be
noticed when passing under high
voltage power lines or bridges, or in
tunnels.
On FM, interference may be the result
of increasing distance from the trans-
m i t t e r , d e l e c t i o n o f t h e s i g n a l s b y
obstacles (mountains, hills, buildings,
etc.), or of being in an area which is
not covered by a transmitter.
Page 30 of 123
31
AUDIO EQUIPMENT
-
RADIOSelecting radio mode
Selecting a waveband
Adjusting the front/rear sound
distribution (Fader)
When
"FAD" is displayed, press but-
ton I or J.
Button I increases the volume in the
front.
Button J increases the volume in the
rear.
Adjusting the right/left sound
distribution (Balance)
When "BAL" is displayed, press but-
ton I or J.
Button I increases the volume on the
right-hand side.
Button J increases the volume on the
left-hand side.
Automatic volume
correction
This function enables the volume to
be automatically adjusted depending
on the level of noise produced by the
speed of the vehicle.
Press buttons I or J to switch the
function on or off. Press button
R.
B r i e l y p r e s s b u t t o n
R to select the FM1,
FM2 FMast and AM
wavebands.
Notes on radio reception
Your car radio is subject to phenom-
ena which do not affect domestic ra-
dio sets. Both AM (MW/LW) and FM
reception are subject to various forms
o f i n t e r f e r e n c e . T h i s i s n o r e l e c t i o n o n
the quality of the equipment, but is due
to the nature of the signals and the way
in which they are transmitted.
On MW/LW, interference may be
noticed when passing under high
voltage power lines or bridges, or in
tunnels.
On FM, interference may be the result
of increasing distance from the trans-
m i t t e r , d e l e c t i o n o f t h e s i g n a l s b y
obstacles (mountains, hills, buildings,
etc.), or of being in an area which is
not covered by a transmitter.
Page 31 of 123
AUDIO EQUIPMENT
32 -
Manual station search
Press the "MAN" button.
B r i e l y p r e s s b u t t o n L or N to in-
crease or decrease the frequency
displayed.
By continuing to press the button in
the direction selected, you will obtain
continuous scrolling of the frequency.
The scrolling stops as soon as the
button is released.
Pressing the "MAN" button again
returns you to automatic station
search. Automatic storing of FM stations
in the memory (autostore)
Your radio automatically stores the
6 stations with the strongest signal in
FM
. These stations are stored in the
FMast waveband.
I f i t i s n o t p o s s i b l e t o i n d 6 s t a t i o n s ,
the remaining memories are empty.
Automatic station search
Manual storing of stations in the
memory
Select the station required.
Press one of the buttons "1" to "6"
for more than two seconds.
The sound stops then becomes audi-
b l e a g a i n , c o n i r m i n g t h a t t h e s t a t i o n
has been stored in the memory. Press and hold button
R
for more than two
seconds.
Recalling stations stored in the
memory
F o r e a c h w a v e b a n d , b r i e l y p r e s s
buttons "1" to "6" to recall the cor-
responding station.
B r i e l y p r e s s b u t t o n
L or N to search
for the station immediately above or
below. By continuing to press the
button in the direction selected, you
will obtain continuous scrolling of the
frequency.
T h e s c r o l l i n g s t o p s a t t h e i r s t s t a -
tion found as soon as the button is
released.
If the TA t r a f i c p r o g r a m m e i s s e l e c t -
ed, only stations broadcasting this
type of programme are selected.
S e a r c h i n g f o r a s t a t i o n o c c u r s i r s t i n
"LO" sensitivity (selection of the most
powerful transmitters) during scan-
ning of the waveband, then in "DX"
sensitivity (selection of the weakest
and most distant transmitters).
To make a direct search in "DX" sen-
sitivity, press button L or N twice.
Page 32 of 123
33
AUDIO EQUIPMENT
-
RDS T r a f i c i n f o r m a t i o n p r o g r a m m e
(TA) Regional following mode
When they are part of a network, cer-
tain stations broadcast regional pro-
grammes in the various areas they
serve. With regional following mode
you can keep listening to the same
programme.
Press the
"RDS" button for more
than two seconds to switch the func-
tion on or off.
RDS station following
The display indicates the name of the
station selected. The radio is conti-
nually searching for the station which
has the best reception and which is
transmitting the same programme. Press the
"TA" button
to switch the function
on or off.
The multifunction dis-
play will show:
- "TA" if the function is selected,
- "(TA)" if the function is selected
but not available.
A n y t r a f i c i n f o r m a t i o n l a s h w i l l b e
given priority, whatever source you
are listening to (radio, CD or CD
changer).
If you wish to interrupt a message,
press the "TA" button; this switches
the function off.
N o t e : t h e v o l u m e o f t r a f i c i n f o r -
mation is independent of the vol-
ume of normal radio listening. You
can adjust it using the volume but-
ton. The setting will be stored and
will be used when the next mes-
sages are broadcast.
B r i e l y p r e s s t h e
"RDS"
button to switch the
function on or off.
The multifunction dis-
play will show:
- "RDS" if the function is selected.
- "(RDS)" if the function is
selected but not available.
Using the RDS (Radio Data
System) function on FM
Radio Data System allows you to
continue listening to the same sta-
tion, whatever frequency it is using
for the region you are going through.
Page 33 of 123
AUDIO EQUIPMENT
34 -
EON system
This connects stations which are part
of the same network. It enables the
b r o a d c a s t o f t r a f i c i n f o r m a t i o n o r a
PTY programme, by a station that is
part of the same network as the sta-
tion to which you are listening.
This service is available when you
have selected the TA t r a f i c i n f o r m a -
tion programme or the PTY function.
Search by type of programme
(PTY)
This allows you to listen to stations broad-
c a s t i n g a s p e c i i c t y p e o f p r o g r a m m e
(news, culture, sport, rock, etc.).
To search for a
PTY programme :
With FM selected, press
the "TA" button for two
seconds to switch this
function on or off. - select the
PTY function,
- b r i e l y p r e s s b u t t o n L or N to
scroll down the list of the various
types of programmes offered,
- when the programme of your choice is displayed, keep button
L or N pressed for two seconds
to carry out an automatic search
(after an automatic search the
PTY function is switched off).
In PTY mode the different types
of programme can be stored in the
memory. To do this, press the prese-
lection buttons " 1" to " 6" for two
s e c o n d s . B r i e l y p r e s s t h e c o r r e -
sponding button to recall the type of
programme stored in the memory.
Page 43 of 123
COMFORT
44 -
AUTOMATIC AIR CONDITIONING
The air conditioning can only operate when the engine is running.
Automatic operation 2. Control by the AUTO programme
Press the "AUTO" button.
We recommend that you use
this mode: it provides opti-
mised automatic control of
all of the functions, passenger com-
p a r t m e n t t e m p e r a t u r e , a i r l o w , a i r
distribution and air recirculation, in
accordance with the comfort value
that you have chosen. This system is
designed to operate effectively in all
seasons, with the windows closed. Note:
for your comfort, the values
set when the engine is switched off
are retained on re-starting if the tem-
perature in the passenger compart-
m e n t h a s n o t c h a n g e d s i g n i i c a n t l y ;
otherwise, operation resumes in au-
tomatic mode.
When the engine is cold, to prevent
too great a distribution of cold air, the
ventilation will only reach its optimum
level gradually.
On entering the vehicle, if the interior
temperature is much colder or war-
mer than is comfortable, there is no
need to change the value displayed
i n o r d e r t o r e a c h t h e r e q u i r e d l e v e l o f
comfort. The system eliminates the
temperature difference automatically
a n d a s q u i c k l y a s p o s s i b l e .
Manual operation
If you wish, you can make a different
choice from that offered by the sys-
tem by changing a setting. The other
functions will still be controlled auto-
matically.
Pressing the AUTO button returns
the system to completely automatic
operation.
1. Temperature adjustment
The value indicated on the
display corresponds to a
level of comfort and not to a
temperature in degrees Cel-
sius or Fahrenheit.
Press the arrows 1 (up and down) to
change this value. A setting around
21 enables a comfortable tempera-
ture to be obtained.
Page 44 of 123
45
COMFORT
-
3. Air conditioning On/Off
Press this button to stop air
cooling.
The symbol ECO is dis-
played.
Automatic operation of the air condi-
tioning is resumed when the button
is pressed again. The symbol A/C is
displayed.
4. Air distribution
Pressing this button several
times in succession enables
t h e a i r l o w t o b e d i r e c t e d i n
turn towards:
- the windscreen (de-icing or demisting),
- the windscreen and the footwells,
- the footwells,
- the centre and side vents and the footwells,
- the centre and side vents. 5 . A i r l o w
Press buttons "+" and
"-" respectively to in-
crease or decrease
t h e a i r l o w .
6. Air intake / Air recirculation 7 . S w i t c h i n g t h e s y s t e m o f f
The OFF button switches off
all the functions of the sys-
tem.
Temperature-related comfort and de-
misting are no longer guaranteed but
a s l i g h t l o w o f a i r i s m a i n t a i n e d .
Pressing the OFF, AUTO , or "visi-
bility" button again reactivates the
system with the values set before it
was switched off.
Note: i f y o u w i s h t o c u t o f f t h e l o w
of air completely, press the air intake
button 7.
Press this button for recir-
culation of the interior air.
Recirculation, shown on the
display, enables the pas-
senger compartment to be insulated
from exterior odours and smoke.
Avoid prolonged recirculation of inte-
rior air (risk of condensation and de-
t e r i o r a t i o n o f t h e a i r q u a l i t y ) .
Press the button again to resume
automatic management of the intake
of air.
Notes
To prevent condensation on the in-
side of the vehicle in cold or wet
weather, you are advised to avoid
using the
ECO mode.
To guarantee correct operation of
your air conditioning system, we also
recommend that you have it checked
regularly.