Peugeot 207 CC Dag 2007.5 Owner's Guide

!
INSTRUMENTS and CONTROLS
34
For safety reasons, it is imperative
that coni guration of the multifunc-
tion displays by the driver takes
place when stationary.
Dei ne the vehicle parameters
Once this menu has been selected, you
can activate or deactivate the following
equipment:
- directional headlamps (refer to the
"Visibility" section),
- "follow-me-home" lighting (refer to the "Visibility" section). "Telephone" menu
With the RD4 audio equipment switched
on, once this menu has been select-
ed you can coni gure your Bluetooth
hands-free kit (matching), consult the
various telephone directories (calls log,
services, ...) and manage your commu-
nications (pick up, hang up, call waiting,
secret mode, ...).
For further details concerning the "Tele-
phone" application, refer to the RD4 part
of the "Audio and Telematics" section.
Display coni guration
Once this menu has been selected, you
can gain access to the following set-
tings:
- brightness-video setting,
- date and time setting,
- selection of the units.
Selection of the language
Once this menu has been selected,
you can change the language used by
the display (Deutsch, English, Espanol,
Français, Italiano, Nederlands, Portu-
gues, Portugues-Brasil).
Example: setting of the duration of the
"follow-me-home" lighting
"Personalisation-Configuration"
menu
Once this menu has been selected, you
can gain access to the following func-
tions:
- dei ne the vehicle parameters,
- display coni guration,
- selection of the language.
 Press the "

" or "

" buttons, then
the "OK" button to select the menu
required.

 Press the "
 " or "

" buttons, then
the "OK" button to select the "Fol-
low-me-home lighting" line.

 Press the "

" or "
 " buttons to
set the value required (15, 30 or
60 seconds), then press the "OK"
button to coni rm.

 Press the "

" or "
 " buttons, then
the "OK" button to select the "OK"
box and coni rm or press the "ESC"
button to cancel.

INSTRUMENTS and CONTROLS
COLOUR SCREEN 16/9 General menu Controls
When the RT4 GPS audio/telephone is
switched on, select the menu which cor-
responds to the following applications:
- the satellite navigation system,
- the guidance on the map,
- the trafi c information,
- the audio sources (radio, CD, Juke-box, ...),
- the phone books and the telephone functions,
- the coni guration of the screen and the setting of the parameters of the
vehicle's equipment,
- the displaying of a video,
- the vehicle diagnostics. From the RT4 GPS audio/telephone
control panel, to select one of the ap-
plications:

 press the "MENU" button to gain
access to the general menu ,

 turn the navigator to move the se-
lection,

 press the navigator to coni rm the
selection,
or

 press the "ESC" button to abandon
the operation in progress and return
to the previous display.
For further details concerning these ap-
plications, refer to the RT4 part of the
"Audio and Telematics" section.
Displays on the screen
When the ignition is switched on, this
displays the following information auto-
matically and directly:
- the time,
- the date,
- the outside temperature (if there is
a risk of ice, you are warned by a
message).
Warning messages (e.g.: "Fuel level
low") and vehicle function status mes-
sages (e.g.: "Automatic switching on of
the headlamps activated") may appear
temporarily. These can be cleared by
pressing the "ESC" button.

INSTRUMENTS and CONTROLS
Dei ne the vehicle parameters
Once the "Dei ne the vehicle parame-
ters" menu has been selected, you can
activate or deactivate certain driving
and comfort equipment:
- directional headlamps (refer to the "Visibility" section),
- "follow-me-home" lighting and dura- tion (refer to the "Visibility" section). Example: setting the duration of the
"follow-me-home" lighting

 Turn the navigator to select the
"Lighting coni guration" menu,
then press it to coni rm.

 Select the line "Duration of the
"follow-me-home" lighting" then
coni rm.
"Configuration" menu

 Press the "MENU" button on the
RT4 GPS audio/telephone to gain
access to the general menu .

 Turn the navigator to select the

"Coni guration" menu, then press
it to coni rm. Once this menu has been selected, you
can gain access to the following func-
tions:

 Select the duration then press the
navigator.

 Turn the navigator to set the value
required (15, 30 or 60 seconds),
then press the navigator.

 Select the "OK" box, then coni rm.

!
i
INSTRUMENTS and CONTROLS
37
For safety reasons, it is imperative
that coni guration of the multifunc-
tion displays by the driver takes
place when stationary.
The RT4 GPS audio/telephone must
reinitialise and re-start in order to
change the voice used by the voice
synthesiser (male or female) or the
language used by the system.
Once the "Display coni guration" menu
has been selected, you gain access to
the following parameters:
- selection of the palette of colours
available for the display,
- setting of the brightness and bril- liance of the display,
- setting of the date and time (12 or 24 hour mode, adjustment of the
minutes on GPS),
- selection of the units (temperature in °Celsius or °Fahrenheit; consump-
tion in l/100 km or mpg or km/l).
Display coni guration
"Video" menu
You can connect video equipment
(camcorder, digital camera, DVD play-
er, ...) to the three audio/video sockets,
located in the glove box.

Videos can only be displayed when
stationary.
Once this menu has been selected, you
can select:
- "Activate video mode" to activate/ deactivate the video,
- "Video parameters" to set the dis- play format, the brightness, the
contrast and the colours.

 Press the "MODE" or "DARK" but-
ton to disconnect the displaying of
the video.

 Press the "SOURCE" button sev-
eral times in succession to select an
audio source other than that of the
video.
Sounds
Once the "Sounds" menu has been se-
lected, you gain access to the following
parameters:
- setting of the voice commands,
- setting of the voice synthesiser (vol-
ume, male or female),
- activation of the auxiliary input AUX. Language selection
Once the "Language selection" menu
has been selected, you gain access to
the following parameters:
- selection of the display language
(Français, English, Italiano,
Portugues, Espanol, Deutsch,
Nederlands),
- selection of the information and voice commands language (Français,
English, Italiano, Portugues,
Espanol, Deutsch, Nederlands).

INSTRUMENTS and CONTROLS
38
"Vehicle diagnostics" menu
Once this menu has been selected, you
can consult information concerning the
status of the vehicle, such as the warn-
ings log or the status of the functions.
Warnings log
This summarises the active warning
messages, displaying them in succes-
sion on the multifunction display.
 Press the "MENU" button to gain
access to the general menu.

 Turn the navigator and press it to
select the "Vehicle diagnostics"
menu.
 On the "Vehicle diagnostics"
menu, select one of the following
applications:
Status of the functions
This summarises the active or inactive
status of the functions present on the
vehicle.

INSTRUMENTS and CONTROLS
39
TRIP COMPUTER

 Press the button, located at the end
of the wipers stalk , to display the
various items of trip computer data
in succession. The trip computer data is the following:
System which provides current infor-
mation concerning the route travelled
(range, consumption, ...).
Zero reset
Monochrome display A

 The next press then returns you to
the normal display.
Data displays - the range,
- the current consumption,
- the distance travelled,
- the average consumption,
- the average speed.

 Press the control for more than two
seconds to reset the distance trav-
elled, the average consumption and
the average speed to zero.

!
i
i
INSTRUMENTS and CONTROLS
41
Distance remaining to be
travelled
(km or miles)
This is the distance remaining
to be travelled to the i nal destination. It
is either calculated instantly by the navi-
gation system if guidance is activated,
or entered by the user.
If the distance is not entered, dashes
are displayed in place of the digits.
Average speed
(km/h or mph)
This is the average speed cal-
culated since the last trip com-
puter zero reset (ignition on).
Range
(km or miles)
This indicates the number of
miles (or kilometres) which
can still be travelled with the fuel re-
maining in the tank in relation to the
average consumption over the last few
miles (kilometres) travelled. Current consumption
(l/100km or km/l or mpg)
This is the average quantity of
fuel consumed over the last few
seconds.
Average consumption
(l/100km or km/l or mpg)
This is the average quantity
of fuel consumed since the
last trip computer zero re-
set.
Distance travelled
(km or miles)
This indicates the distance
travelled since the last trip
computer zero reset.
A few definitions…
When the range falls below 20 miles
(30 m), dashes are displayed. After i ll-
ing with at least 5 litres of fuel, the range
is recalculated and is displayed when it
exceeds 60 miles (100 km).
If dashes are displayed continu-
ously while driving in place of the
digits, contact a PEUGEOT dealer. This function is only displayed from
20 mph (30 km/h).
This i gure may increase following
a change of driving style or relief,
resulting in a signii cant change in
the current consumption.

INSTRUMENTS and CONTROLS
40
- the current information tab with:

!
i
i
INSTRUMENTS and CONTROLS
41
Distance remaining to be
travelled
(km or miles)
This is the distance remaining
to be travelled to the i nal destination. It
is either calculated instantly by the navi-
gation system if guidance is activated,
or entered by the user.
If the distance is not entered, dashes
are displayed in place of the digits.
Average speed
(km/h or mph)
This is the average speed cal-
culated since the last trip com-
puter zero reset (ignition on).
Range
(km or miles)
This indicates the number of
miles (or kilometres) which
can still be travelled with the fuel re-
maining in the tank in relation to the
average consumption over the last few
miles (kilometres) travelled. Current consumption
(l/100km or km/l or mpg)
This is the average quantity of
fuel consumed over the last few
seconds.
Average consumption
(l/100km or km/l or mpg)
This is the average quantity
of fuel consumed since the
last trip computer zero re-
set.
Distance travelled
(km or miles)
This indicates the distance
travelled since the last trip
computer zero reset.
A few definitions…
When the range falls below 20 miles
(30 m), dashes are displayed. After i ll-
ing with at least 5 litres of fuel, the range
is recalculated and is displayed when it
exceeds 60 miles (100 km).
If dashes are displayed continu-
ously while driving in place of the
digits, contact a PEUGEOT dealer. This function is only displayed from
20 mph (30 km/h).
This i gure may increase following
a change of driving style or relief,
resulting in a signii cant change in
the current consumption.

COMFORT
42
VENTILATION
System which creates and maintains
comfortable conditions in the vehicle’s
passenger compartment. Air treatment
The incoming air follows various routes
depending on the controls selected by
the driver:
- direct arrival in the passenger com-
partment (air intake),
- passage through a heating circuit (heating),
- passage through a cooling circuit (air conditioning). The temperature control enables you to
obtain the level of comfort required by
mixing the air of the various circuits.
The air distribution control enables you
to diffuse the air in the passenger com-
partment combining several air vents.
The air l ow control enables you to in-
crease or reduce the speed of the ven-
tilation blower.
Air intake
The air circulating in the passenger com-
partment is i ltered and originates either
from the outside via the grille located at
the base of the windscreen or from the
inside in air recirculation mode. Control panel
The controls of this system are grouped
together on control panel
A on the cen-
tre console. Depending on the model,
the functions offered are:
- the level of comfort required,
- the air l ow,
- the air distribution,
- the de-icing and demisting,
- the manual or automatic air condi- tioning controls.
Air diffusion

1. Windscreen de-icing or demisting
vents.

2. Front side window de-icing or de-
misting vents.

3. Side adjustable and closing vents.

4. Central adjustable and closing
vents.

5. Air outlets to the front footwells.

6. Air outlets to the rear footwells.