fuse box diagram Peugeot 208 2019 Owner's Manual

134
F Unclip the cover by pulling at the top left, then right.
F

D
isengage the cover fully and turn it over.
F

R
emove the carrier on the back of which the
tweezers are fitted.
Glove box
F Open the glove box lid.
F U nclip the fusebox cover by pulling at top
right.
F

D
isengage the cover completely and turn it
ove r.
F

R
emove the carrier on the back of which the
tweezers are fitted. F

a
ll electrical consumers must be switched
of f,
F
i
dentify the failed fuse using the allocation
tables and the diagrams given in the
following pages.
To remove or fit a fuse, it is essential to:
F
u
se the special tweezers to extract the fuse
from its housing and check the condition of
its filament.
F
a
lways replace the failed fuse with a fuse
of the same rating (same colour); use of
a

different rating may cause malfunctions
(risk of fire).
If the fuse fails again soon after replacement,
have the vehicle's electrical system checked by
a PEUGEOT dealer or a qualified workshop.
Professional repairers: for full information
on the fuses and relays, consult the
"Methods" wiring information and diagrams
available from a


PEUGEOT dealer.
The fuse allocation tables and the
corresponding diagrams are available
from a PEUGEOT dealer or from
a


qualified workshop.
The replacement of a
fuse not shown in
the allocation tables below may cause
a


serious malfunction of your vehicle.
Contact a
PEUGEOT dealer or a qualified
workshop.
Installing electrical
accessories
Your vehicle's electrical system is
designed to operate with standard or
optional equipment.
Before installing other electrical
equipment or accessories on your vehicle,
contact a
PEUGEOT dealer or a qualified
workshop.
Good
Failed
Tw e e z e r s
Before changing a


fuse:
F

i

mmobilise the vehicle and switch off the
ignition,
In the event of a breakdown