bulb Peugeot 306 C Dag 2001 Owner's Manual

16
1 YOUR 306 CABRIOLET AT A GLANCE1 15
PEUGEOT Servicing
PEUGEOT Servicing ...............................................18Special features.......................................................19
Types of service ......................................................20
The maintenance cycle of your 306 cabriolet ..........20
PEUGEOT servicing levels A and C ........................21
Tables of lubricants..................................................22 Routine maintenance
Checking levels .......................................................26Changing a wheel....................................................28
Changing a bulb ......................................................32
Changing a fuse ......................................................35
Charging a battery ...................................................40
Fitting audio equipment ...........................................41
Towing your vehicle .................................................42
Using a tow bar .......................................................43
Bodywork maintenance ...........................................44
2 CONTENTS
16 17
3 MAINTENANCE OF YOUR 306 CABRIOLET18 45

ATTENTIONVOIR NOTICE
WARNING READ
INSTRUCTIONS
H7 UV
MAINTENANCE OF YOUR 306 CABRIOLET
32
Side lights W5W
Turn the plastic protector and remove it.
Turn the pin a quarter turn and remove it. Change the bulb.
Warning There is a risk of damage to the dipped/main beam headlamps. Only use bulbs supplied by the following manufacturers: - GET/TUNGSRAM- PHILIPS- OSRAM
These bulbs meet the UV-free speci- fications necessary for the correctoperation and reliability of the head-lamps. The headlamps are fitted with poly- carbon glass with a protective coating.
We strongly advise against cleaningthem using a dry or abrasive cloth orusing products which contain deter-gents or solvents.
CHANGING A BULB Dipped/main beam headlamps Double headlamps: two H7 55W bulbs. Changing the bulbs
Turn the plastic protector and remove it. Disconnect the connectors.Press the spring to unclip the bulb and then change it. When fitting, ensure that the direction notches are positioned correctly andthat the plastic protector is secured
correctly. Only handle the bulb using a dry cloth.

MAINTENANCE OF YOUR 306 CABRIOLET33
Amber direction indicators PY21W
Pull out the connector. Turn the socket a quarter of a turn. Replace the bulb.Side direction indicators WY5W Pull the rear part of the transparent
cover and release the assembly. Support the connector and turn the transparent cover a quarter turn. Change the bulb.Number plate lights W5W Remove the translucent plastic protectors.

B
A
2
3
54
1
MAINTENANCE OF YOUR 306 CABRIOLET
34
Rear lights
- Unscrew the wing nut inside the
boot.
- Remove the plastic cover.
- Disconnect the connector Aby
pressing the metal bar.
- Disconnect the connector Bby
releasing the tab.
- Release the light unit.
- Change the faulty bulb. 1 Brake lights/side lights P21/5W.
2 Side lights R5W.
3 Rear fog lamp P21W.
4 Reversing lights P21W.
5 Direction indicators PY21W.
Additional brake light This is fitted with long-life light- emitting diodes.
The bulbs must be repla-ced by bulbs of identical
specification and colour.
When refitting, ensurethat the seal is clean, inorder to prevent water
entry.