Bleed Peugeot 307 CC 2003 Owner's Manual
Page 162 of 173
PRACTICAL INFORMATION
148
Moving shelf
Boot lid
Hinged covers Screen
Roof locking bolt
Bleed screw
Boot sill Plastic covers
22-09-2003
Page 164 of 173
22-09-2003
PRACTICAL INFORMATION
150
Open the boot lid.
Using the hook 1, secure the boot mat on the screen
bar 2.
This allows access to the hydraulic pump screw.
Press the Allen TM
key adaptor Bfirmly into the bleed
screw 3, then unscrew half a turn. Using the Torx TM
key adaptor C, remove the six plastic
cover bolts 4, located on either side of the boot.
Remove the two plastic covers 5.
Extract the cable buckles 6from the trims.
Note: if a cable buckle is not visible, carefully insert your
hand behind the trim to extract it.