sensor Peugeot 307 CC 2007.5 Owner's Manual

Page 70 of 184

i
62
VISIBILITY
Automatic switching on of the
lights
Side lights and dipped beam head-
lamps switch on automatically if the
light is poor, or during operation of
the windscreen wipers. They switch
off as soon as the light becomes
bright enough or the windscreen wip-
ers stop.

Note: in foggy weather or in snow,
the brightness sensor can detect suf-
i cient light. As a consequence, the
lights will not come on automatically.
Manual "Follow-me-home"
lighting

When the automatic switching on of
the lights function is deactivated , the
side lights and dipped headlamps re-
main on for the duration selected for the
automatic "follow-me-home" lighting.

If the vehicle is not i tted with the
automatic switching on of the lights
function , when you leave your vehi-
cle, the side lights and dipped head-
lamps remain on for thirty seconds.
Direction indicators
(l ashers)

Left: downwards.

Right: upwards.

Note: if you forget to cancel the di-
rection indicator, the volume of the
audible signal will increase, if you
are driving at a speed greater than
50 mph (80 km/h).
Automatic "Follow-me-home"
lighting
With the ignition off, when you leave
your vehicle with the automatic
switching on of the lights function
activated , the side lights and dipped
headlamps remain on for the select-
ed duration. Activation:

 switch off the engine,

 "l ash" the headlamps,

 get out of the vehicle and lock it.
Deactivation:

 "l ash" the headlamps again,

 get out of the vehicle and lock it.
To deactivate or activate
this function, go to the mul-
tifunction display coni gura-
tion menu.
The duration of the timed
period must also be set (15, 30,
60 seconds), via the multifunction
display coni guration menu.
Cancelling:

 "l ash" the headlamps,

 get out of the vehicle and lock it. Activation

 Turn ring A to the "AUTO" posi-
tion. The automatic lighting is
accompanied by a message on
the multifunction display.
Deactivation

 Turn ring A to a position other
than "AUTO" . Switching off is
accompanied by a message on
the multifunction display.

If the brightness sensor does not
function correctly, the lights come
on accompanied by the service
warning light, an audible signal and
a message on the multifunction dis-
play.
Contact a PEUGEOT dealer.
Do not cover the brightness sen-
sor, coupled with the rain sensor,
located in the centre of the wind-
screen, behind the interior mir-
ror. It is used for the automatic
switching on of the lights.

Page 71 of 184

i
62
VISIBILITY
Automatic switching on of the
lights
Side lights and dipped beam head-
lamps switch on automatically if the
light is poor, or during operation of
the windscreen wipers. They switch
off as soon as the light becomes
bright enough or the windscreen wip-
ers stop.

Note: in foggy weather or in snow,
the brightness sensor can detect suf-
i cient light. As a consequence, the
lights will not come on automatically.
Manual "Follow-me-home"
lighting

When the automatic switching on of
the lights function is deactivated , the
side lights and dipped headlamps re-
main on for the duration selected for the
automatic "follow-me-home" lighting.

If the vehicle is not i tted with the
automatic switching on of the lights
function , when you leave your vehi-
cle, the side lights and dipped head-
lamps remain on for thirty seconds.
Direction indicators
(l ashers)

Left: downwards.

Right: upwards.

Note: if you forget to cancel the di-
rection indicator, the volume of the
audible signal will increase, if you
are driving at a speed greater than
50 mph (80 km/h).
Automatic "Follow-me-home"
lighting
With the ignition off, when you leave
your vehicle with the automatic
switching on of the lights function
activated , the side lights and dipped
headlamps remain on for the select-
ed duration. Activation:

 switch off the engine,

 "l ash" the headlamps,

 get out of the vehicle and lock it.
Deactivation:

 "l ash" the headlamps again,

 get out of the vehicle and lock it.
To deactivate or activate
this function, go to the mul-
tifunction display coni gura-
tion menu.
The duration of the timed
period must also be set (15, 30,
60 seconds), via the multifunction
display coni guration menu.
Cancelling:

 "l ash" the headlamps,

 get out of the vehicle and lock it. Activation

 Turn ring A to the "AUTO" posi-
tion. The automatic lighting is
accompanied by a message on
the multifunction display.
Deactivation

 Turn ring A to a position other
than "AUTO" . Switching off is
accompanied by a message on
the multifunction display.

If the brightness sensor does not
function correctly, the lights come
on accompanied by the service
warning light, an audible signal and
a message on the multifunction dis-
play.
Contact a PEUGEOT dealer.
Do not cover the brightness sen-
sor, coupled with the rain sensor,
located in the centre of the wind-
screen, behind the interior mir-
ror. It is used for the automatic
switching on of the lights.

Page 74 of 184

i
i
65
VISIBILITY
Automatic windscreen
wipers
In AUTO mode, the windscreen wipers
operate automatically and adapt their
speed to the intensity of the rainfall .
Activation
Activation of the function is accom-
panied by a message on the multi-
function display.
Deactivation
Deactivation of the function is ac-
companied by a message on the
multifunction display.
The function is deactivated when the
windscreen wipers stalk is moved to
position I , 1 or 2 .

In the event of malfunction of the
automatic windscreen wipers, the
windscreen wipers will operate in in-
termittent mode.
Contact a PEUGEOT dealer to have
the system checked. In this position, the courtesy
light comes on automati-
cally:
- when the vehicle is unlocked,
- when the key is removed from the ignition,
- when a door is opened,
- when the vehicle location func- tion is used.
It switches off gradually:
- when the vehicle is locked,
- when the ignition is switched on,
- with the ignition off, 30 seconds after the last door is closed.
COURTESY LIGHTS
1. Front courtesy light

The automatic windscreen
wipers function must be reac-
tivated if the ignition has been
switched off for more than
one minute, by pressing the
stalk downwards. Do not cover the rain sensor lo-
cated on the windscreen behind
the interior mirror.
When using an automatic car
wash, switch off the ignition.
In winter, it is advisable to wait
for the windscreen to completely
clear of ice before operating the
automatic wipe.

Page 75 of 184

i
i
65
VISIBILITY
Automatic windscreen
wipers
In AUTO mode, the windscreen wipers
operate automatically and adapt their
speed to the intensity of the rainfall .
Activation
Activation of the function is accom-
panied by a message on the multi-
function display.
Deactivation
Deactivation of the function is ac-
companied by a message on the
multifunction display.
The function is deactivated when the
windscreen wipers stalk is moved to
position I , 1 or 2 .

In the event of malfunction of the
automatic windscreen wipers, the
windscreen wipers will operate in in-
termittent mode.
Contact a PEUGEOT dealer to have
the system checked. In this position, the courtesy
light comes on automati-
cally:
- when the vehicle is unlocked,
- when the key is removed from the ignition,
- when a door is opened,
- when the vehicle location func- tion is used.
It switches off gradually:
- when the vehicle is locked,
- when the ignition is switched on,
- with the ignition off, 30 seconds after the last door is closed.
COURTESY LIGHTS
1. Front courtesy light

The automatic windscreen
wipers function must be reac-
tivated if the ignition has been
switched off for more than
one minute, by pressing the
stalk downwards. Do not cover the rain sensor lo-
cated on the windscreen behind
the interior mirror.
When using an automatic car
wash, switch off the ignition.
In winter, it is advisable to wait
for the windscreen to completely
clear of ice before operating the
automatic wipe.

Page 76 of 184

i
i
65
VISIBILITY
Automatic windscreen
wipers
In AUTO mode, the windscreen wipers
operate automatically and adapt their
speed to the intensity of the rainfall .
Activation
Activation of the function is accom-
panied by a message on the multi-
function display.
Deactivation
Deactivation of the function is ac-
companied by a message on the
multifunction display.
The function is deactivated when the
windscreen wipers stalk is moved to
position I , 1 or 2 .

In the event of malfunction of the
automatic windscreen wipers, the
windscreen wipers will operate in in-
termittent mode.
Contact a PEUGEOT dealer to have
the system checked. In this position, the courtesy
light comes on automati-
cally:
- when the vehicle is unlocked,
- when the key is removed from the ignition,
- when a door is opened,
- when the vehicle location func- tion is used.
It switches off gradually:
- when the vehicle is locked,
- when the ignition is switched on,
- with the ignition off, 30 seconds after the last door is closed.
COURTESY LIGHTS
1. Front courtesy light

The automatic windscreen
wipers function must be reac-
tivated if the ignition has been
switched off for more than
one minute, by pressing the
stalk downwards. Do not cover the rain sensor lo-
cated on the windscreen behind
the interior mirror.
When using an automatic car
wash, switch off the ignition.
In winter, it is advisable to wait
for the windscreen to completely
clear of ice before operating the
automatic wipe.

Page 83 of 184

!
71
SAFETY
Sensors i tted in each valve check
the tyre pressure during driving and
trigger a warning in the event of
malfunction (speed above 12 mph
(20 km/h)).
The service warning light
comes on on the instrument
panel, accompanied by an
audible signal and a message
on the multifunction display lo-
cating the wheel concerned.
Check the tyre pressures as soon as
possible. This check must be carried
out when the tyres are cold. Puncture
The
STOP warning light comes on on
the instrument panel, accompanied
by an audible signal and a message
on the multi-function display locating
the wheel concerned.
Stop immediately, avoiding any sud-
den movement of the steering wheel
and the brakes.
Change the damaged wheel (punc-
tured or very del ated tyre), and have
the tyre pressure checked as soon
as possible.
The service warning light
comes on on the instrument
panel, accompanied by an
audible signal and a mes-
sage on the multifunction
display locating the wheel or wheels
which are not detected or indicating a
fault in the system.
Contact a PEUGEOT dealer to re-
place the faulty sensor(s).
Flat tyre Sensor(s) not detected or faulty

Notes:
This message is also displayed when
one of the wheels is away from the
vehicle (being repaired) or when one
or more wheels without a sensor are
i tted.
The spare wheel is not i tted with a
sensor.
TYRE UNDER-INFLATION
DETECTION All repairs and changing of tyres
on a wheel i tted with this sys-
tem must be carried out by a
PEUGEOT dealer.
If, when changing a tyre, you
install a wheel which is not de-
tected by your vehicle (example:
i tting of snow tyres), you must
have the system reinitialised by
a PEUGEOT dealer.
The tyre under-inl ation detec-
tion system is an aid to driving
which does not replace the need
for the driver to be vigilant or to
drive responsibly.
This system does not eliminate
the need to have the tyre pres-
sure checked regularly (see
manufacturer’s label on the
door pillar) to ensure that the
optimum dynamic performance
of the vehicle is maintained and
prevent premature wear of the
tyres, particularly in arduous
driving conditions (heavy load,
high speed).
The tyre pressures must be
checked cold, at least once a
month. Remember to check the
pressure of the spare wheel.
The tyre under-inl ation detec-
tion system may experience
temporary interference due to
radioelectric emissions on a fre-
quency close to that used by the
system.