display PEUGEOT 307 CC DAG 2007 User Guide

Page 37 of 184

35
MULTIFUNCTION DISPLAYS
Selection of the language
Once the "Selection of the language"
menu has been selected, you gain
access to the following parameters:
- selection of the display, infor-mation and voice commands
language (Français, English,
Italiano, Portugues, Espanol,
Deutsch, Nederlands).
Display coni guration
Once the "Display coni guration"
menu has been selected, you gain
access to the following parameters:
- selection of the palette of colours available for the display,
- setting of the brightness and bril- liance of the display,
- setting of the date and time (12 or 24 hour mode, adjustment of the
minutes on GPS),
- selection of the units (tempera- ture in °Celsius or °Fahrenheit;
consumption in l/100 km or mpg
or km/l).
Sounds
Once the "Sounds" menu has been
selected, you gain access to the fol-
lowing parameters:
- setting of the voice commands,
- setting of the voice synthesiser (volume of the instructions and of
the other messages, male or fe-
male),
- activation of the auxiliary input AUX, Dei ne the vehicle parameters
Once the "Dei ne the vehicle param-
eters" menu has been selected, you
can activate or deactivate certain
driving and comfort equipment:
- parking assistance (refer to the
"Driving" section),
- "follow-me-home" lighting and duration (refer to the "Visibility"
section). "Configuration" menu

 Press the "MENU" button on the
RT4 GPS audio/telephone to gain
access to the general menu .

 Turn the dial to select the "Con-
i guration" menu, then press it
to coni rm.
Once this menu has been selected,
you can gain access to the following
functions:

Page 38 of 184

i
!
36
MULTIFUNCTION DISPLAYS
"Video" menu
You can connect video equipment
(camcorder, digital camera, DVD
player, ...) to the three audio/video
sockets, located in the glove box.

Videos can only be displayed
when stationary.
Once this menu has been selected,
you can select:
- "Activate video mode" to activate/ deactivate the video,
- "Video parameters" to set the dis- play format, the brightness, the
contrast and the colours.

 Press the "MODE" or "DARK"
button to disconnect the display-
ing of the video.

 Press the "SOURCE" button sev-
eral times in succession to select
an audio source other than that of
the video.

 Select the line "Duration of the
"follow-me-home" lighting" then
coni rm.

Example: setting the duration of the
"follow-me-home" lighting

 Turn the dial to select the "Light-
ing coni guration" menu, then
press it to coni rm.

 Select the duration then press the
dial.

 Turn the dial to set the value re-
quired (15, 30 or 60 seconds),
then press the dial.

 Select the "OK" box, then con-
i rm. The RT4 GPS audio/telephone
must reinitialise and restart in
order to change the voice used
by the voice synthesiser (male
or female) or the language used
by the system.
For safety reasons, it is impera-
tive that coni guration of the mul-
tifunction displays by the driver
takes place when stationary.

Page 99 of 184

DRIVING
This speed limiter, of the new gener-
ation, has a display on the instrument
panel to indicate the programmed
speed.
It prevents exceeding of the vehicle
speed programmed by the driver.
When the programmed speed is
reached, pressing the accelerator
pedal no longer has any effect.
The limiter operates with a pro-
grammed speed of at least 18 mph
(30 km/h); it remains active regard-
less of any action on the brake and
clutch pedals.

The operating actions must be
carried out:
-
when stationary, with the engine
running,
or
- with the vehicle moving. When the speed limiter function is
active, pressing this button displays
the distance recorders.
After a few seconds or when this but-
ton is pressed again, the display re-
turns to the speed limiter function. Storing a speed
A speed can be stored without acti-
vating the limiter.

Press buttons
2 and 3 briel y to de-
crease or increase by 1 mph (1 km/h).
An extended press decreases or in-
creases by 5 mph (5 km/h).
A maintained press decreases or in-
creases the programmed speed in
steps of 5 mph (5 km/h).
Selecting the function

 Place the dial 1 in the LIMIT posi-
tion. The limiter is not yet active.
By default, the display indicates: Activating/deactivating the limiter
Pressing button
4 once activates the
limiter, pressing the button again de-
activates it.

When the limiter is active, the display
indicates (e.g. at 70 mph (110 km/h)):
SPEED LIMITER * Instrument panel display
* According to country.

Page 101 of 184

85
DRIVING
This cruise control, of the new gen-
eration, is linked with the speed lim-
iter. It has a display on the instrument
panel to indicate the memorised ref-
erence speed.
It enables the vehicle to maintain a
steady speed programmed by the
driver.
In order for it to be memorised or ac-
tivated, the vehicle speed must be
greater than 25 mph (40 km/h) with
at least fourth gear engaged for vehi-
cles i tted with a manual gearbox.
On vehicles i tted with an automatic
gearbox, the lever must be in posi-
tion D , or in at least second gear in
sequential mode. When the cruise control function
is activated, pressing this button
enables you to display the distance
recorders.
After a few seconds or when this
button is pressed again, the display
returns to the cruise control function. First activation/memorising a
reference speed

As soon as you reach the chosen
speed, press button
2 or 3 . This mem-
orises the speed and the display indi-
cates (e.g. at 70 mph (110 km/h)):

Selecting the function

 Place switch 1 in the CRUISE
position. The cruise control is
not yet active and no speed has
been memorised. The display
indicates:
Note: It is possible to accelerate
and drive momentarily at a speed
greater than the memorised speed.
The value memorised l ashes. When
the accelerator pedal is released, the
vehicle will return to the memorised
speed.
Cancelling the cruise control

If you wish to cancel the cruise control:

 Press button 4 or the brake or
clutch pedal.
The display indicates (e.g. at 70 mph
(110 km/h)):
* According to country.
CRUISE CONTROL * Instrument panel display

Page 103 of 184

87
DRIVING
First activation/memorising a
reference speed
As soon as you reach the chosen
speed, press button 2 or 3 . This mem-
orises the speed and the display indi-
cates (e.g. at 70 mph (110 km/h)):
This cruise control has a display on
the instrument panel to indicate the
memorised reference speed.
It enables the vehicle to maintain a
steady speed programmed by the
driver.
In order for it to be memorised or ac-
tivated, the vehicle speed must be
greater than 25 mph (40 km/h) with
at least fourth gear engaged for vehi-
cles i tted with a manual gearbox.
On vehicles i tted with an automatic
gearbox, the lever must be in posi-
tion D or at least second gear must
be engaged in sequential driving
mode. When the cruise control function
is activated, pressing this button
enables you to display the distance
recorder.
After a few seconds or when this
button is pressed again, the display
returns to the cruise control function.
Selecting the function

 Place switch 1 in the ON position.
The cruise control is not yet active
and no speed has been memo-
rised. The display indicates:
Note: It is possible to accelerate
and drive momentarily at a speed
greater than the memorised speed.
The value memorised l ashes. When
the accelerator pedal is released, the
vehicle will return to the memorised
speed.
Cancelling the cruise control

If you wish to cancel the cruise control:

 Press button 4 or the brake or
clutch pedal.
The display indicates (e.g. at 70 mph
(110 km/h)):
* According to country.
CRUISE CONTROL * Instrument panel display

Page 143 of 184

124
S
O S
SOURCE
MODE BAND ESC
2
abc
5
jkl
8
tuv 3
def
6
mno
9
wxyz
1 4
ghi
7
pqrs
0 # MENU LIST
TA
PTY
DARK
2
1
5
3 4
89 10 15
11 17 18
12 16
14
7
6
13
01
1. Ejection of the CD.
2. Selection of the source: radio, Jukebox, CD, CD ch anger
and auxiliary (AUX, if activated on the Coniguratio n menu).
Long press: CD copy to hard disc.
3. Long press on the SOS button: emergency call.
4. Selection of the display on the screen from the mo des:
TRIP, TEL, NAV and AUDIO.
5. Modiication of the screen display.
Long press: reinitialisation of the RT4 GPS audio /telephone.
6. On/Off and Volume adjustment.
7. Selection of the wavebands FM1, FM2, FMast, AM. 8.
TA (Trafic Announcement) function on/off.
Long press: access to the PTY (radio Programme TY pes)
mode.
9. Access to the "PEUGEOT" services menu.
10. Cancellation of the current operation.
Long press: return to the current application.
11. Automatic search for a lower/higher frequency.
Selection of the previous/next CD, MP3 or Jukebox track.
12. Displaying of the general menu.
13. Keypad for entering descriptions by successive pre sses.14.
Selection of the previous/next CD.
Selection of the previous/next MP3/Jukebox director y.
15. Audio option adjustments: front/rear, left/right b alance,
loudness, sound ambiences.
16. Selection and conirmation.
17. SIM card slot.
18. Displaying of the list of local radio stations, of the tracks on
the CD or of the MP3/Jukebox directories.
Long press: updating of the local radio stations.
FIRST STEPS

Page 144 of 184

125
02
GENERAL MENU
MAP: orientation, details,
display. AUDIO FUNCTIONS: radio,
CD, Jukebox, options.For maintenance of the
display, the use of a
soft, non-abrasive cloth
(spectacles cloth) is
recommended without any
additional product.
TELEMATIC: telephone,
directory, SMS.
CONFIGURATION: vehicle,
display, time, languages,
voice, auxiliary socket (AUX)
parameters.
VIDEO: activation, parameters.
VEHICLE DIAGNOSTICS:
warnings log, status of the
functions.
NAVIGATION GUIDANCE:
GPS, stages, options. TRAFFIC INFORMATION:
TMC information, messages.

Page 151 of 184

132
ESC
MENU LIST
MENU
ESC
MENU LIST
ESC
LIST
MENU
1
2
3
4 5
6
7
ESC
MENU LIST
03
ESC
MENU LIST
ESC
MENU LIST
ESC
MENU LIST
Press the MENU button.
Press the dial to conirm the selection.
Turn the dial and select the MAP
function.
Turn the dial and select the
MAP IN WINDOW or
FULL SCREEN MAP tab.
Select OK and press the dial to
conirm.
Press the dial to conirm the selection.
Turn the dial and select the
DISPLAY MAP function.
DISPLAYING THE MAP IN A WINDOW
OR IN FULL SCREEN MODE
GPS
DISPLAY MAP
FULL SCREEN MAP
OK
MAP IN WINDOW

Page 154 of 184

135
ESCLIST
MENU
MENU1
ESC
MENU LIST
2
3
4 6
5
ESC
MENU LIST
ESC
MENU LIST
7
ESC
MENU LIST
ESC
MENU LIST
ESC
MENU LIST
ESC
MENU LIST
04
Press the MENU button.
READ MESSAGES
NEW MESSAGE DISPLAY
OK
CONFIGURING THE TMC MESSAGE
ANNOUNCEMENTSWe recommend that you do not tick the NEW MESSAGE D ISPLAY tab for regions with heavy trafic.
Turn the dial and select the
TRAFFIC INFORMATION function.
Press the dial to conirm the selection.
Press the dial to conirm the selection.
Turn the dial and select the
CONFIGURE MESSAGE
ANNOUNCEMENT function. Select the READ MESSAGES tab.
The Trafic Information Messages will
be read by the voice synthesiser.
Select the
NEW MESSAGE DISPLAY tab.
The trafic information messages
are extended to the ilters selected
(geographic...) and can also be
displayed when guidance is not
active.
TRAFFIC INFORMATION
Select OK and press the dial to
conirm.
CONFIGURE MESSAGE ANNOUNCEMENT

Page 155 of 184

136
1
2
3
4S
O S SOURCE
MODE BAND T
PTA YDARK
SOURCE
S
O S SOURCE
MODE BAND T
PTA YDARKBAND
SOURCE
BAND
ESC
MENU LIST
LIST
ESC LIST
MENU
MENU
ESC
MENU LIST
ESC
MENU LIST
ESC
MENU LIST
1
2
3
4
LIST
ESC
MENU LIST
ESC
MENU LIST
05 AUDIO/VIDEO
RADIO
SELECTING A STATION
Press the SOURCE button several
times in succession and select the
RADIO.
Press the BAND button to select a
waveband: FM1, FM2, FMast, AM.
Briely press one of the buttons to
carry out an automatic search of the
radio stations.
Press one of the buttons to carry out a
manual search of the radio stations.
Press the LIST button to display
the list of stations received locally
(60 maximum).
To update this list, press for more than
two seconds.
The external environment (hills, buildings, tunnels , basement car parks, ...) may block reception,
including in RDS mode. This is a normal effect of t he way in which radio waves are transmitted and doe s
not indicate any failure of the audio equipment.
RDS
Select ACTIVATE FREQUENCY
FOLLOWING (RDS) then press OK.
RDS appears on the display.
Select the RADIO PREFERENCES
function then press OK.
Select AUDIO FUNCTIONS then
press OK.
Press the MENU button.
The RDS, if displayed, enables you to continue list ening to the
same station by means of frequency following. Howev er, in certain
conditions, this RDS station is not followed throug hout the country
as radio stations do not cover 100 % of the territo ry. This explains
the loss of reception of the station during a journ ey.
RADIO PREFERENCES
ACTIVATE FREQUENCY FOLLOWING (RDS)

Page:   < prev 1-10 11-20 21-30 31-40 41-50 50 next >