Peugeot 307 SW 2007.5 Owner's Guide

Page 31 of 199

29
INSTRUMENTS, CONTROLS and DISPLAYS
- the current information tab with:

Page 32 of 199

30
INSTRUMENTS, CONTROLS and DISPLAYS
Distance remaining to be
travelled
(km or miles)
This is the distance remaining
to be travelled to the i nal destination.
It is either calculated instantly by the
navigation system if guidance is
activated, or entered by the user.
If the distance is not entered, dashes
are displayed in place of the digits.
Average speed
(km/h or mph)
This is the average speed
calculated since the last
trip computer zero reset
(ignition on).
Range
(km or miles)
This indicates the number
of miles (or kilometres)
which can still be travelled with the
fuel remaining in the tank in relation
to the average consumption over the
last few miles (kilometres) travelled. Current consumption
(l/100 km or km/l or mpg)
This is the average quantity
of fuel consumed over the
last few seconds.
Average consumption
(l/100 km or km/l or mpg)
This is the average quantity
of fuel consumed since the
last trip computer zero reset.
Distance travelled
(km or miles)
This indicates the distance
travelled since the last trip
computer zero reset.
A few definitions…
When the range falls below 20 miles
(30 km), dashes are displayed. After
i lling with at least 5 litres of fuel, the
range is recalculated and is displayed
when it exceeds 60 miles (100 km). If dashes are displayed
continuously while driving in
place of the digits, contact a
PEUGEOT dealer. This function is only displayed
from 20 mph (30 km/h).
This i gure may increase
following a change of driving
style or relief, resulting in
a signii cant change in the
current consumption.

Page 33 of 199

31
INSTRUMENTS, CONTROLS and DISPLAYS
Display C

 Press the "MENU" button to gain
access to the general menu.

 Press the arrows, then the

"OK" button to select the "Trip
computer" menu.

 On the "Trip computer" menu,
select one of the following
applications:
Warnings log
This summarises the active warning
messages, displaying them in
succession on the multifunction
display.
Status of the functions
This summarises the active or inactive
status of the functions present on the
vehicle.
Enter the distance to the
destination
This enables you to enter an
approximate value for the distance to
the i nal destination.
"TRIP COMPUTER" MENU
System which provides general
information concerning the status
of certain equipment with which
your vehicle is equipped, such as
the warnings log, the status of the
functions...
"DIAGNOSTICS" MENU

 On the "Diagnostics" menu,
select one of the following
applications:
Colour display

 Press the "MENU" button to gain
access to the general menu.

 Turn the dial and press it to select
the "Diagnostics" menu.

Page 34 of 199

32
MULTIFUNCTION DISPLAYS
Presentation
This displays the following informa-
tion:
- the time,
- the date,
- the outside temperature * (this l ashes if there is a risk of ice),
- the status of the accesses (doors, boot, ...),
- the warning messages (e.g.: "Emission control system faulty")
or information messages (e.g.:
"Auto lights on"), displayed
temporarily, can be cleared by
pressing the "ESC" button,
- the trip computer (see corresponding section).
MONOCHROME DISPLAY A
(WITHOUT RD4 AUDIO EQUIPMENT)
Parameter configuration
There are three display control
buttons:
- "ESC" to abandon the operation
in progress,
- "MENU" to scroll through the
menus or sub-menus,
- "OK" to select the menu or sub-
menu required. Press the
"MENU" button to scroll
through the various menus of the
general menu:
- vehicle coni guration,
- options,
- display settings,
- languages,
- units.
Press the "OK" button to select the
menu required.
General menu
* With air conditioning only.

Page 35 of 199

33
MULTIFUNCTION DISPLAYS
Once the "Vehicle coni guration"
menu has been selected, you can
activate or deactivate the following
equipment:
- wiper linked with reverse gear (refer to the "Visibility" section),
- "follow-me-home" lighting (refer to the "Visibility" section),
- parking assistance (refer to the "Driving" section).
Options
Once the "Options" menu has been
selected, you can start diagnostics of
the status of the equipment (active,
not active, faulty). Languages
Once the "Languages" menu has
been selected, you can change the
language used by the display (Fran-
çais, Italiano, Nederlands, Portu-
gues, Portugues-Brasil, Deutsch,
English, Espanol).
Display settings
Once the "Display settings" menu has
been selected, you can gain access
to the following settings:
- year,
- month,
- day,
- hour,
- minutes,
- 12 or 24 hour mode.
Units
Once the "Units" menu has been
selected, you can change the units
of the following parameters:
- temperature (°C or °F),
- fuel consumption (l/100, mpg or
km/l).
Once you have selected a setting,
press the "OK" button to change its
value.
Wait for approximately ten seconds
without any action to allow the
changed data to be recorded or press
the "ESC" button to cancel.
The display then returns to the
normal display.
For safety reasons, coni gu-
ration of the multifunction
displays by the driver must
take place when stationary.
Vehicle coni guration

Page 36 of 199

34
MULTIFUNCTION DISPLAYS
MONOCHROME DISPLAY A
Press the "MENU" button to gain
access to the general menu, then
press the "

" or "
 " buttons to
scroll through the following items:
- radio-CD,
- vehicle coni guration,
- options,
- display settings,
- languages,
- units.
Press the "OK" button to select the
menu required.
Presentation
This displays the following informa-
tion, via the RD4 audio equipment
control keypad:
- the time,
- the date,
- the outside temperature * (this l ashes if there is a risk of ice),
- the audio source displays (radio, CD, ...),
- the status of the accesses (doors, boot, ...),
- the warning messages (e.g.: "Emission control system faulty")
or information messages (e.g.:
"Auto lights on"), displayed
temporarily, can be cleared by
pressing the "ESC" button,
- the trip computer (see corresponding section). Radio-CD
With the RD4 audio equipment
switched on, once the "Radio-CD"
menu has been selected, you can
activate or deactivate the functions
linked with the use of the radio (RDS
following, REG mode), the CD or the
CD changer (introscan, random play,
CD repeat).
For further details concerning the
"Radio-CD" application, refer to
the RD4 part of the "Audio and
Telematics" section. Once the "Vehicle coni guration"
menu has been selected, you can
activate or deactivate the following
equipment:
- rear wiper linked with reverse gear
(refer to the "Visibility" section),
- "follow-me-home" lighting (refer to the "Visibility" section),
- parking assistance (refer to the "Driving" section).
Options
Once the "Options" menu has been
selected, you can start diagnostics of
the status of the equipment (active,
not active, faulty).
General menu Vehicle coni guration
* With air conditioning only.

Page 37 of 199

35
MULTIFUNCTION DISPLAYS
Display settings
Once the "Display settings" menu has
been selected, you can gain access
to the following settings:
- year,
- month,
- day,
- hour,
- minutes,
- 12 or 24 hour mode. Languages
Once the "Languages" menu has
been selected, you can change the
language used by the display (Fran-
çais, Italiano, Nederlands, Portu-
gues, Portugues-Brasil, Deutsch,
English, Espanol).
Units
Once the "Units" menu has been
selected, you can change the units
of the following parameters:
- temperature (°C or °F),
- fuel consumption (l/100, mpg or
km/l).
Once you have selected a setting,
press the "
 " or "
 " buttons to
change its value.
Press the "
 " or "
 " buttons to
move to the previous or next setting
respectively.
Press the "OK" button to record
the change and return to the normal
display or press the "ESC" button to
cancel. For safety reasons, coni gu-
ration of the multifunction
displays by the driver must
take place when stationary.

Page 38 of 199

36
MULTIFUNCTION DISPLAYS
Presentation
It displays the following information:
- the time,
- the date,
- the exterior temperature (this l ashes if there is a risk of ice),
- the accesses check (doors, boot, ...),
- the warning messages (e.g.: "Depollution system faulty") or
information messages (e.g.: "Au-
tomatic headlamp lighting acti-
vated"), displayed temporarily,
can be cleared by pressing the

"ESC" button,
- the trip computer (see corre- sponding section),
MONOCHROME DISPLAY C
(WITHOUT RD4 AUDIO EQUIPMENT)
There are three buttons and a
navigator to enable you to control the
screen:
- "MENU" to display the general
menu,
- "MODE" to change the permanent
application (trip computer,
date, ...),
- "ESC" to abandon the operation
in progress,
- Rotation of the navigator:
movement on the display or
changing of a setting,
- Press on the navigator:
coni rmation of the selection. Press the
"MENU" button to access
the general menu:
- trip computer (see corresponding section),
- personalisation-coni guration.
Turn the navigator to select the menu
required, then coni rm by pressing
the navigator.
Once this menu has been selected,
you can access the following
functions:
- dei ne the vehicle parameters,
- display coni guration,
- selection of the language.
Parameter configuration General menu
"Personalisation-
Configuration" menu

Page 39 of 199

37
MULTIFUNCTION DISPLAYS
Selection of the language
Once this menu has been selected,
you can change the language
used on the display (Deutsch,
English, Espanol, Français, Italiano,
Nederlands, Portugues, Portugues-
Brasil).
Display coni guration
Once this menu has been selected,
you can access the following
settings:
- brightness-video setting,
- date and time setting,
- selection of the units.

Example: "Duration of the "follow-
me-home" lighting"
For safety reasons, coni gu-
ration of the multifunction
displays by the driver must
take place when stationary.
Dei ne the vehicle parameters
Once this menu has been selected,
you can activate or deactivate the
following equipment:
- wiper linked with reverse gear
(refer to the "Visibility" section),
- "follow-me-home" lighting and duration (refer to the "Visibility"
section),
- parking assistance (refer to the "Driving" section).
Once you have selected a setting,
press the navigator.
Turn the navigator to change its
value.
Press the navigator to record the
change and move on to the next
setting or press the "ESC" button to
cancel.

Page 40 of 199

38
MULTIFUNCTION DISPLAYS
MONOCHROME SCREEN C
Controls
From the RD4 audio equipment
control panel, you can:

 press the "MENU" button to gain
access to the general menu ,

 press the "  " or "  " buttons to
scroll through the items on the
screen,

 press the "MODE" button to
change the permanent application
(trip computer, audio source, ...),

 press the "  " or "  " buttons to
change a setting value,

 press the "OK" button to
coni rm,
or

 press the "ESC" button to
abandon the operation in
progress.
Displays on the screen
This displays the following informa-
tion:
- the time,
- the date,
- the outside temperature * (this l ashes if there is a risk of ice),
- the status of the accesses (doors, boot, ...),
- the audio sources (radio, CD, ...),
- the trip computer (refer to the corresponding section).
Warning messages (e.g.: "Emission
control system faulty") or information
messages (e.g.: "Automatic switching
on of the headlamps activated")
may appear temporarily. These can
be cleared by pressing the "ESC"
button.
General menu

 Press the "MENU" button to gain
access to the general menu :
- audio functions,
- trip computer (refer to the cor- responding section),
- personalisation-coni guration,
- telephone (hands-free kit).

 Press the "  " or "  " buttons to
select the menu required, then
coni rm by pressing the "OK"
button.
* With air conditioning only.
"Audio functions" menu
With the RD4 audio equipment
switched on, once this menu has
been selected you can activate
or deactivate the functions linked
with use of the radio (RDS, REG,
RadioText), the CD or the CD changer
(introscan, shufl e, CD repeat).
For further details concerning the
"Audio functions" application, refer
to the RD4 part of the "Audio and
Telematics" section.
"Trip computer" menu
Once this menu has been selected,
you can consult information concern-
ing the status of the vehicle (warn-
ings log, status of the functions, ...).

Page:   < prev 1-10 11-20 21-30 31-40 41-50 51-60 61-70 71-80 ... 200 next >