Peugeot 307 SW Dag 2004 Owner's Manual

15-03-200415-03-2004
120121YOUR 307 SW IN DETAIL
Example of installation of the nets:
Luggage retaining net, "folded"
version
Luggage retaining net, "L"
version Luggage retaining net,
"hammock" version, in
the tailgate
Luggage retaining net,
"hammock" version at the rollerHigh load retaining net in the
2nd row
Load space cover stored with the
two storage nets

15-03-200415-03-2004
120121YOUR 307 SW IN DETAIL
"PORSCHE TIPTRONIC
SYSTEM" AUTOMATIC
GEARBOX
The four speed automatic gearbox
offers a choice between the comfort
of integral automatic operation ,
enhanced by a sport and a snow
program, or manual gear chang-
ing .
Gear selection gate
F Move the lever in the gate to se-
lect a position.
The indicator light for the selection
is displayed on the instrument panel
display.
Park: to immobilise the vehicle or
start the engine , with the handbrake
on or off.
Reverse: to reverse (select this
function with the vehicle stationary,
engine at idle).
Neutral: to start the engine and to
park , with the handbrake on.
Note : if function N is engaged inad-
vertently while driving, allow the en-
gine to return to idle before engaging
function D to accelerate.
Drive: for driving in automatic
mode.
Manual: to select the gears.
S: sport program.
T: snow program.
Starting the engine
F with the handbrake applied, select
position P or N in the gate,
F turn the ignition key to the Start-
ing position.
Moving off
With the engine running, to move off
from position P:
F
it is essential to press the brake
pedal to exit position P,
F
select function R, D or M, then
gradually release the pressure
on the brake pedal; the vehicle
moves off immediately.
You can also move off from position
N:
F release the handbrake, with your
foot on the brake,
F
select function R, D or M, then
gradually release the pressure
on the brake pedal; the vehicle
moves off immediately.
WARNING
When the engine is at idle, brakes
not applied, if function R, D or M is selected the vehicle moves
even without the accelerator being
pressed.
For this reason, do not leave chil-
dren unsupervised inside the ve-
hicle, with the engine running .
When maintenance operations need
to be carried out with the engine run-
ning, apply the handbrake and select
position P.

15-03-200415-03-2004
122123YOUR 307 SW IN DETAIL
Automatic operation
Automatic changing of the four
gears :
F select function D in the gate.
The gearbox always selects the
most suitable gear according to the
following parameters:
- the style of driving,
- the road proile,
- the vehicle load.
The gearbox is then operating in
auto-adaptive mode, without any
action on your part.
WARNING
Never select function N when the
vehicle is moving.
Never select functions P or R unless
the vehicle is stationary.
Never change between functions to
optimise braking on a slippery sur-
face.
Notes
For immediate maximum accelera-
tion without touching the gear lever,
press the accelerator pedal down as
far as it will go (kick down). The gear-
box will automatically change down
or maintain the gear selected until
maximum engine speed is reached.
When braking, the gearbox will
automatically change down in order
to provide eficient engine braking. If you take your foot off the accel-
erator suddenly, the gearbox will not
change to a higher gear for reasons
of safety.
Sport and snow programs
In addition to the auto-adaptive
program, there are two special pro-
grams.
The program is displayed on the in-
strument panel screen.
Sport program
F
Press button S once the vehicle
has been started and function D
selected.
The gearbox automatically favours
sporty driving and more dynamic
acceleration.
Snow program
This program improves starting and
drive when traction is poor.
F Press button
T once the vehicle
has been started and function D
selected.
The gearbox adapts to driving on
slippery roads.
Note: you can return to the auto-
adaptive program at any time.
F Press button S or
T again to
switch off the program you are in.
Manual operation
Manual changing of the four gears:
F select function M in the gate,
F push the lever to the + sign to
change to a higher gear,
F pull the lever to the - sign to
change to a lower gear.
You can change from position D
(driving in automatic mode) to posi-
tion M (driving in manual mode) at
any time.
Notes
It is only possible to change from one
gear to another if the vehicle speed
and engine speed permit. If they do
not, the vehicle will operate tempo-
rarily in automatic mode.
When the vehicle is stationary or
moving very slowly, the gearbox
automatically selects gear M1.
Program S (sport) and
T (snow) do
not operate in manual mode.

15-03-200415-03-2004
122123
HANDBRAKE
Applying
Pull the handbrake to immobilise
your vehicle.
Warning: when parking on a slope,
direct your wheels towards the pave-
ment and pull the handbrake.
Releasing
Pull on the handle and press the but-
ton to release the handbrake.
YOUR 307 SW IN DETAIL
Operating abnormality
Any operating abnormality is indi-
cated by an audible signal, accom-
panied by the message "Automatic
gear fault" on the multi-function
display, "-" and lashing of the Sport
and Snow warning lights on the in-
strument panel.
In this situation the gearbox oper-
ates in downgrade mode (locked in
3rd gear). You may feel a substantial
knock when changing from P to R
and from N to R (this will not cause
any damage to the gearbox).
Do not exceed 60 mph (100 km/h),
keeping within the limit of local speed
restrictions.
Contact a PEUGEOT dealer as soon
as possible.
If the battery is lat and the
lever is in position P, it will
be impossible to change
to another position.
Above all, do not force the lever
as there is a risk of damage to the
automatic gearbox. Illumination of this warning
light and of the
STOP warn-
ing light, accompanied by
an audible signal (while the
vehicle is being driven) and
the message "handbrake on" on
the multi-function display, indicates
that the handbrake is still on or has
not been properly released.

15-03-200415-03-2004
122123
HANDBRAKE
Applying
Pull the handbrake to immobilise
your vehicle.
Warning: when parking on a slope,
direct your wheels towards the pave-
ment and pull the handbrake.
Releasing
Pull on the handle and press the but-
ton to release the handbrake.
YOUR 307 SW IN DETAIL
Operating abnormality
Any operating abnormality is indi-
cated by an audible signal, accom-
panied by the message "Automatic
gear fault" on the multi-function
display, "-" and lashing of the Sport
and Snow warning lights on the in-
strument panel.
In this situation the gearbox oper-
ates in downgrade mode (locked in
3rd gear). You may feel a substantial
knock when changing from P to R
and from N to R (this will not cause
any damage to the gearbox).
Do not exceed 60 mph (100 km/h),
keeping within the limit of local speed
restrictions.
Contact a PEUGEOT dealer as soon
as possible.
If the battery is lat and the
lever is in position P, it will
be impossible to change
to another position.
Above all, do not force the lever
as there is a risk of damage to the
automatic gearbox. Illumination of this warning
light and of the
STOP warn-
ing light, accompanied by
an audible signal (while the
vehicle is being driven) and
the message "handbrake on" on
the multi-function display, indicates
that the handbrake is still on or has
not been properly released.

15-03-200415-03-2004
124125
ANTI-LOCK BRAKING
SYSTEM (ABS) AND THE
ELECTRONIC BRAKE FORCE
DISTRIBUTION (EBFD)
The ABS, in conjunction with the
electronic brake force distribution,
increases the stability and mano-
evrability of your vehicle on braking,
in particular on poor or slippery road
surfaces.
Note: when changing wheels (tyres
and rims), make sure that these are
approved.
The anti-lock braking system comes
into operation automatically when
there is a risk of wheel lock. Stop immediately.
In both cases, consult a PEUGEOT
dealer.
EMERGENCY BRAKING
ASSISTANCE SYSTEM
In an emergency, this system enables
the optimum braking pressure to be
reached more quickly, thus reducing
the stopping distance.
It is triggered by the speed at which
the brake pedal is activated. The
effect of this is a reduction in the re-
sistance of the pedal and an increase
in braking eficiency.
YOUR 307 SW IN DETAIL
When this warning light
comes on, accompanied by
a buzzer and the message

"ABS fault" , it indicates
that there is a malfunction of
the ABS, which can cause a loss of
control of the vehicle when braking.
When this warning light comes
on, connected to the
STOP
and ABS warning lights,
accompanied by a buzzer and
the message 'Braking fault' ,
it indicates that there is a malfunction
of the electronic brake force distribu-
tion, which can cause a loss of control
of the vehicle when braking. Normal operation of the ABS may
make itself felt by slight vibrations
of the brake pedal.
In emergency braking, press
very irmly without releasing
the pressure.

15-03-200415-03-2004
124125YOUR 307 SW IN DETAIL
TRACTION CONTROL (ASR)
AND DYNAMIC STABILITY
CONTROL (ESP)
These systems are linked and com-
plement the ABS.
The ASR system optimises drive to
prevent the wheels skidding, by act-
ing on the brakes of the drive wheels
and on the engine. It also allows the
directional stability of the vehicle to
be improved on acceleration.
If there is a variation between the
trajectory followed by the vehicle and
that required by the driver, the ESP
system automatically acts on the
engine and the brake of one or more
wheels, in order to put the vehicle
back on course. Disarming the ASR/ESP systems
In exceptional conditions (starting a
vehicle which is bogged down, stuck
in snow, on soft ground, ...), it may
be advisable to disarm the ASR and
ESP systems, so that the wheels can
move freely and regain grip.
F
Press the "ESP OFF" switch, lo-
cated on the central section of the
fascia. Operating check
The ESP/ASR systems
offer exceptional safety
in normal driving, but this
should not encourage the
driver to take extra risks or
drive at high speed.
The correct functioning of these
systems depends on observation
of the manufacturer's recommenda-
tions regarding the wheels (tyres
and rims), the braking components,
the electronic components, and the
PEUGEOT assembly and operation
procedures.
After an impact, have the systems
checked by a PEUGEOT dealer.
Operation of the ASR and ESP
systems The switch lights up and the
warning light comes on: the
ASR and ESP systems are
disarmed.
These are triggered again:
F automatically if the ignition is
switched off,
F automatically above 30 mph
(50 km/h),
F manually by pressing the switch
again. When a malfunction of the
systems occurs, the switch
light lashes and the warning
light comes on, accompanied
by an audible signal and the
message "ESP/ASR not function-
ing" on the multifunction display.
Contact a PEUGEOT dealer to have
the systems checked.
The warning light lashes if
the ASR or ESP is activated.

15-03-200415-03-2004
126127YOUR 307 SW IN DETAIL
CRUISE CONTROL
Cruise control enables the vehicle
to maintain a steady speed pro-
grammed by the driver, regardless of
the road characteristics and without
the driver having to touch the accel-
erator or brake pedals.
In order for it to be memorised, the
vehicle speed must be greater than
25 mph (40 km/h) (manual gearbox)
or 40 mph (60 km/h) (automatic gear-
box) and fourth gear at least must be
engaged (second gear for the auto-
matic gearbox).
Operation
F Place switch 1 in the ON position.
A speed can be memorised.
F Place switch 1 in the OFF position
to cancel.
Memorising a speed
As soon as you reach the chosen
speed, press button 2 or 3. This
memorises the speed, which will be
maintained automatically.
Note: It is possible to accelerate
and drive momentarily at a speed
greater than the memorised speed.
When the accelerator pedal is re-
leased, the vehicle will return to the
memorised speed.
Cancelling the memorised
speed
If you wish to cancel the memorised
speed:
F press button 4 or the brake or
clutch pedal.
Recalling the memorised
speed
After cancellation, press button 4.
Your vehicle will return to the last
memorised speed.
Changing a memorised speed
To memorise a speed higher than the
previous one:
F press button 3;
F release it when you have reached
the required speed.
To memorise a speed lower than the
previous one:
F press button 2;
F release it when you have reached
the required speed.
Cancelling the cruise control
F Place switch 1 in the OFF position
or switch off the ignition.
Do not use cruise control
on slippery roads or in
heavy trafic.

15-03-200415-03-2004
126127YOUR 307 SW IN DETAIL
CRUISE CONTROL/SPEED
LIMITER*
Cruise control function: this ena-
bles the vehicle to maintain a steady
speed programmed by the driver,
regardless of the road characteristics
and without the driver having to touch
the accelerator or brake pedals.
In order for it to be memorised, the
vehicle speed must be greater than
25 mph (40 km/h) with at least fourth
gear engaged (second gear for the
automatic gearbox), with the engine
running . Selecting the function
F
Place switch 1 in the CRUISE
position. The cruise control is
not yet active and no speed has
been memorised. The display in-
dicates:
Recalling the memorised speed
After cancellation, press button 4.
Your vehicle will return to the last
memorised speed. The display indi-
cates (e.g. at 70 mph (130 km/h)):
Switching the function off
F
Place switch 1 in position 0 or
LIMIT to switch the system off.
Activation / memorising a speed
As soon as you reach the chosen
speed, press button 2 or 3. This
memorises the speed, which will
be maintained automatically. The
display indicates (e.g. at 70 mph
(110 km/h)):
Note:
It is possible to accelerate
and drive momentarily at a speed
greater than the memorised speed.
The value memorised lashes. When
the accelerator pedal is released, the
vehicle will return to the memorised
speed. Cancelling the memorised speed
If you wish to cancel the memorised
speed:
F
Press button 4 or the brake or
clutch pedal. The display indicates
(e.g. at 70 mph (110 km/h)):
Note: the speed memorised is can-
celled automatically if the vehicle
speed is less than 25 mph (40 km/h),
or if the manual gearbox is in a gear
lower than fourth (second gear for
the automatic gearbox) or if the ESP
is activated.
* During the year, according to engine.

15-03-200415-03-2004
128129YOUR 307 SW IN DETAIL
Changing a memorised speed
To memorise a speed higher than the
previous one, there are two options:
Without using the accelerator:
F press button 3.
A brief press increases by 1 mph
(1 km/h).
An extended press increases the
memorised speed progressively.
Using the accelerator:
F exceed the memorised speed until
the required speed is reached,
F press button 2 or 3.
To memorise a speed lower than the
previous one:
F press button 2.
A brief press decreases by 1 mph
(1 km/h).
An extended press decreases the
memorised speed progressively.
Cancelling the memorised speed
F Place switch 1 in position 0 or
LIMIT or switch off the ignition. Operating check
In the event of a cruise control mal-
function, the memorised speed is
erased, the dashes lash for a few
seconds:
Contact a PEUGEOT dealer to have
the system checked.
Do not use cruise control
on slippery roads or in
heavy trafic.