Peugeot 307 SW Dag 2004 Manual PDF

68
15-03-2004
69
15-03-2004
Selecting a destination stored in
the directory Selection of one of the previous
destinationsChanging the initial route
Select the
''Directory'' function to
access the ile in which the address
you are looking for is archived.
Select a description by scrolling
down the list by means of the dial,
then conirm by pressing the dial.
The directory ile is then displayed.
Select the "OK" function, then press
the dial to access the guidance acti-
vation function.
Follow the directions given by the
system. Select the
"Previous destinations"
function to access one of the last
twenty addresses stored.
Select a description by scrolling
down the list by means of the dial,
then conirm it by pressing the dial.
The complete address is then dis-
played.
Select the "OK" function, then press
the dial to access the guidance acti-
vation function.
Follow the instructions given by
the system. Activate the function
''Divert route'',
then input the distance involved in
the change required.
Select the ''OK'' function then vali-
date by pressing the dial.
The system calculates the change
which is closest to the value input
and gives you the option of whether
or not to use this change.
Details of the route
You can consult the destination ad-
dress at any time by activating the
"Chosen destination" function on
the "Navigation - Guidance" menu.
YOUR 307 SW IN DETAIL

68
15-03-2004
69
15-03-2004
Guidance options Calculation criteria
The menu ''Guidance options''
provides access to the following
functions:
- changing of the route calculation criteria,
- voice synthesis adjustment of guid- ance messages,
- description of the information relat- ing to the navigation CD-Rom,
- management of the addresses stored in the directory. The last criterion used is displayed.
Select a criterion from the list, then
validate by pressing the dial.
When the criterion of your choice
has been selected, select the
"OK"
function then conirm by pressing
the dial.
Adjusting the voice synthesiser
Select the type of voice "male" or
"female" , after inserting the conigu-
ration CD-Rom.
Adjust the volume of the voice syn-
thesis by turning the dial, then vali-
date by pressing the dial.
Note: the volume can also be ad-
justed during a message, using the
audio/telephone button or the steer-
ing wheel control.
Management of the directory
This function enables you to rename
an address stored in the directory.
Select the description correspond-
ing to the stored address to be
changed.
Select the "Rename" function, then
conirm by pressing the dial.
Select the "OK" function, then con-
irm by pressing the dial to record the
changes made.
Stopping / Resuming guidance ฀•฀฀ "Stop guidance"
During guidance, select this func- tion then validate.
฀•฀฀ "Resume guidance"
In the absence of guidance, select this function then validate to acti-
vate guidance to the last destina-
tion programmed.
Note: after re-starting the engine,
a screen appears enabling you to
resume the guidance activated be-
fore the ignition was switched off.
YOUR 307 SW IN DETAIL

70
15-03-2004
71
15-03-2004
"Navigation - Guidance"
contextual menu
The contextual menu associated with
the "Navigation - Guidance" applica-
tion appears as a superimposed display,
when this is the application currently in
use in the main screen window.
This menu is limited to the following functions:
- changing of the initial route (entering of a
diversion)*,
- switching to "Selection - Movement on
map" mode**,
- storing of the current location (postal ad-
dress if available or, if it is not, the GPS
co-ordinates),
- changing of the route calculation criteria,
- stopping or resuming of guidance (dis-
playing of the message which changes
depending on the previous status),
- displaying of the map, full screen or reduced size on the right (displaying of the message
which varies depending on the previous
status)**.
TMC (Trafic Message Channel)
RDS Trafic Information
This function enables you to re-
ceive messages regarding the trafic
conditions (accidents, trafic jams,
weather, ...).
They may appear temporarily as a
superimposed display or be read by
the voice synthesiser, if it is active. Select the
"TMC Trafic Informa-
tion" function on the "Telematics"
menu, you can choose:
- "Consult the messages" to display the list of TMC messages available,
- "Filter the TMC information" to se- lect one or more types of message
and initialise the TMC station,
- "Voice synthesiser" to listen to the TMC messages received,
- "Activate/Deactivate trafic infor- mation" to display or not display
the TMC messages received.
Initialising the TMC station
To initialise this function, you must
select an FM station which can trans-
mit these messages.
Select the "Choice of the TMC
station" function from the "Trafic
Information TMC" menu, one of
the following will then appear on the
screen:
- the name of the station that you are currently listening to,
- "No TMC station available" if no station has been selected or if the
station selected does not transmit
TMC messages,
- "Searching" if you have activated the search for the next station.
YOUR 307 SW IN DETAIL
You can read the messages trans-
mitted by the TMC station, while
listening to another station**.
In map mode **, special TMC sym-
bols are displayed depending on the
type of information.
* CT monochrome screen only.
** DT colour screen only.

70
15-03-2004
71
15-03-2004
YOUR 307 SW IN DETAIL
Filtering the TMC messages
To ilter these messages, select the
"Filter the TMC information" func-
tion from the "Trafic Information
TMC" menu, you then obtain:
- "Route information ilter" to obtain the messages relating to the cur-
rent guidance outline,
- "Filter by event" to display the mes- sages speciic only to accidents, or
trafic jams, or...,
- "Geographic ilter" to take into ac- count the messages within a radius
of action to be deined around the
vehicle and/or a location.
You can ilter these messages using
one or more ilters simultaneously. General notes on the "Map"
application**
The
"Map" application has two dis-
play modes:
- "Vehicle following on map"
mode, representing active guid-
ance on the map on the right and
a large-scale view of the next inter-
section on the left,
- "Selection - Movement on map"
mode, representing consultation
of the map at full screen size or
reduced size on the right with a
compass on the left.
To switch from one mode to the other,
press the dial on the right briely, then
select the "Move the map" or "Exit
the map mode" function. In
"Selection-movement on map"
mode, you can see symbols, repre-
senting the various types of services
which exist, sorted by category:
- "Administration and safety" symbol on a grey background,
- "Hotels, bars and restaurants" symbol on a yellow background,
- "Other businesses" symbol on a purple background,
- "Culture, tourism and entertain- ment" symbol on a white back-
ground,
- "Sports centres and open air centres" symbol on a green back-
ground,
- "Transporation and automobiles" symbol on a blue background.
A "Zoom" function enables you to
enlarge the map, in accordance with
the thirteen preset levels relating to
the following scales:
- 50 m/cm, 100 m/cm, 150 m/cm, 200 m/cm, 500 m/cm,
- 1 km/cm, 2 km/cm, 5 km/cm,
- 10 km/cm, 20 km/cm, 50 km/cm,
- 100 km/cm, 200 km/cm.
This is achieved by turning the dial.

70
15-03-2004
71
15-03-2004
YOUR 307 SW IN DETAIL
Filtering the TMC messages
To ilter these messages, select the
"Filter the TMC information" func-
tion from the "Trafic Information
TMC" menu, you then obtain:
- "Route information ilter" to obtain the messages relating to the cur-
rent guidance outline,
- "Filter by event" to display the mes- sages speciic only to accidents, or
trafic jams, or...,
- "Geographic ilter" to take into ac- count the messages within a radius
of action to be deined around the
vehicle and/or a location.
You can ilter these messages using
one or more ilters simultaneously. General notes on the "Map"
application**
The
"Map" application has two dis-
play modes:
- "Vehicle following on map"
mode, representing active guid-
ance on the map on the right and
a large-scale view of the next inter-
section on the left,
- "Selection - Movement on map"
mode, representing consultation
of the map at full screen size or
reduced size on the right with a
compass on the left.
To switch from one mode to the other,
press the dial on the right briely, then
select the "Move the map" or "Exit
the map mode" function. In
"Selection-movement on map"
mode, you can see symbols, repre-
senting the various types of services
which exist, sorted by category:
- "Administration and safety" symbol on a grey background,
- "Hotels, bars and restaurants" symbol on a yellow background,
- "Other businesses" symbol on a purple background,
- "Culture, tourism and entertain- ment" symbol on a white back-
ground,
- "Sports centres and open air centres" symbol on a green back-
ground,
- "Transporation and automobiles" symbol on a blue background.
A "Zoom" function enables you to
enlarge the map, in accordance with
the thirteen preset levels relating to
the following scales:
- 50 m/cm, 100 m/cm, 150 m/cm, 200 m/cm, 500 m/cm,
- 1 km/cm, 2 km/cm, 5 km/cm,
- 10 km/cm, 20 km/cm, 50 km/cm,
- 100 km/cm, 200 km/cm.
This is achieved by turning the dial.

72
15-03-2004
73
15-03-2004
"Selection - Movement on map"
mode
This mode permits:
- selection of any point on the map to obtain guidance towards it or to
obtain information about it (postal
address if available or, if it is not,
GPS co-ordinates),
- movement on the map by means of the four directional arrows, rep-
resenting the four cardinal points
(North, East, South, West),
- zooming in on the map in accord- ance with the thirteen preset levels,
- displaying of the "Map" contextual
menu. Map
From the
general menu , the main
"Map" menu offers various options
for guidance management:
- switching to "Selection - Movement on map" mode,
-
direction of the map towards the North
or in the direction of the vehicle,
- recentering of the map around the vehicle,
- opening of the services selection window visible on the map, such
as hotels, service stations, etc.
- displaying of the window for enter- ing the description for recording the
current position of the vehicle in a
directory ile.
YOUR 307 SW IN DETAIL
"Vehicle following on map" mode
This mode permits:
- displaying of the vehicle on the map with the route proposed by
the navigation if the guidance is
active,
- zooming in on the map in accord- ance with the thirteen preset levels,
- displaying of the "Navigation -
Guidance" contextual menu.

72
15-03-2004
73
15-03-2004
"Map" contextual menu
The contextual menu associated with
the "Map" application and with the
"Selection - Movement on map"
mode appears as a superimposed
display, when these are in use in the
main screen window.
This menu is limited to the following
functions:
- displaying of the information on the location selected on the map,
- selection of a location on the map as a destination,
- storing of the location selected (postal address if available or, if it is
not, GPS co-ordinates, so that they
can be recorded in a directory ile),
- switching to "Vehicle following on map" mode.
YOUR 307 SW IN DETAIL

15-03-200415-03-2004
7475YOUR 307 SW IN DETAIL

15-03-200415-03-2004
7475YOUR 307 SW IN DETAIL
VENTILATION
1. Windscreen de-icing or demisting
vents.
2. Front window de-icing or demist-
ing vents.
3. Side vents.
4. Centre vents.
5. Air outlet to front footwells.
6. Air outlet to rear footwells.
Advice on operation
F Place the air low control at a level
suficient to ensure a good renew-
al of air in the passenger compart-
ment.
Note: only use the ''OFF'' position
occasionally (risk of condensation).
F For perfectly even air distribution,
take care not to obstruct the ex-
terior air intake grilles, the vents
and the air ducts under the front
seats, as well as the air extractor
located in the boot. Check that the
passenger compartment ilter is in
good condition.

15-03-200415-03-2004
7677YOUR 307 SW IN DETAIL
AIR CONDITIONING
The air conditioning does not oper-
ate while the air low adjustment
control is in the "OFF" position .
Note: It is quite normal that the
condensation created by the air con-
ditioning results in a low of water un-
der the vehicle when it is stationary.
1. Air conditioning control
The air conditioning is designed to
operate in all seasons. In summer,
it enables the temperature to be
lowered and in winter, above 0 °C,
it increases the effectiveness of the
demisting.
2. Temperature adjustment
To be adjusted to your requirements.3. Air distribution adjustment
Windscreen and side win-
dows (de-icing/demisting).
Windscreen, side windows
and footwells.
Footwells.
Press the switch, the indica-
tor light comes on. Centre and side vents.
To quickly de-ice or demist the wind-
screen and side windows:
- Place the temperature and air low
controls to maximum,
- Close the centre vents,
- Switch air intake button 5 to the
"Outside Air" position (button 5 re-
leased, indicator light off),
- Start the air conditioning by press- ing the A/C button.