Peugeot 307 SW Dag 2006 Service Manual

2MULTIFUNCTION DISPLAYS
39
MONOCHROME SCREEN CT
Presentation
This displays the following informa-
tion, via the RT3 audio/telephone
control keypad:
- the time,
- the date,
- the outside temperature (if there is a risk of ice, you are warned by a
message),
- the audio source displays (radio, CD, ...),
- the telematic system displays (tele- phone, services, ...),
- the status of the accesses (doors, boot, ...),
- the warning messages (e.g.: "Fuel level low") and vehicle function
status messages (e.g.: "Automatic
switching on of the lights activat-
ed") displayed temporarily,
- the trip computer display,
- the satellite navigation system dis- plays. In order to enable you to use all of
your system’s functions, you have
two CD-Roms:
- one, "Configuration", contains the
software and the various display
languages and spoken information,
- the other, "Navigation", contains the satellite navigation system map
data. Press the "MENU" button on the
RT3 audio/telephone to access the
general menu and select one of the
following applications:
- navigation - guidance,
- audio functions,
- trip computer,
- directory,
- telematics,
- configuration.
For further details regarding these
functions, refer to the corresponding
section.
General menu

2MULTIFUNCTION DISPLAYS
40
The "Display configuration" menu
provides access to the following pa-
rameters:
• "Brightness setting": setting of the brightness of the display,
• "Sound": setting of the voice syn- thesiser (for the male/female voice
parameter: insert the configura-
tion CD-Rom); setting of the voice
commands,
• "International parameters": setting of the date and time (12 or 24 hour
mode, adjustment of the minutes on
GPS); selection of the units (l/100 - °C
or mpg - °F),
• "Selection of the language": selection of the language of the display, informa-
tion and voice commands (Français,
English, Italiano, Portugues, Espanol,
Deutsch, Nederlands: insert the con-
figuration CD-rom).
For safety reasons, configu-
ration of the multifunction
displays by the driver must
take place when stationary.
This provides access to successive
confirmation windows.
Example:
"duration of follow-me-home
lighting"
Define the vehicle parameters
This enables you to activate or de-
activate certain driving and comfort
functions:
- wiper linked with reverse gear,
- automatic switching on of the lights,
- "follow-me-home" lighting and du- ration,
- parking assistance.
"Configuration" menuDisplay configuration

2MULTIFUNCTION DISPLAYS
41
COLOUR SCREEN DT
Presentation
This displays the following informa-
tion, via the RT3 audio/telephone
control panel:
- the time,
- the date,
- the outside temperature (if there is a risk of ice, you are warned by a
message),
- the audio source displays (radio, CD, ...),
- the telematic system displays (tele- phone, services, ...),
- the status of the accesses (doors, boot, ...),
- the warning messages (e.g.: "Fuel level low") and vehicle function
status messages (e.g.: "Automatic
switching on of the lights activat-
ed") displayed temporarily,
- the trip computer display,
- the satellite navigation system dis- plays. In order to enable you to use all of
your system’s functions, you have
two CD-Roms:
- one, "Configuration", contains the
software and the various display
languages and spoken information,
- the other, "Navigation", contains the satellite navigation system map data.
Press the "MENU" button on the
RT3 audio/telephone to access the
general menu and select one of the
following applications:
- navigation - guidance,
- audio functions,
- trip computer,
- directory,
- telematics,
- configuration,
- map,
- video.
For further details regarding these
functions, refer to the corresponding
section.
General menu

2MULTIFUNCTION DISPLAYS
42
The "Display configuration" menu
provides access to the following pa-
rameters:
• "Select the colours": selection from the palette of colours available for
the display,
• "Brightness and intensity": setting of the brightness and intensity of
the display,
• "Sound": setting of the voice syn- thesiser (for the male/female voice
parameter: insert the configuration
CD-Rom); setting of the voice com-
mands,
• "International parameters": setting of the date and time (12 or 24 hour
mode, adjustment of the minutes on
GPS); selection of the units (l/100 - °C
or mpg - °F),
• "Selection of the language": selection of the language of the display, informa-
tion and voice commands (Français,
English, Italiano, Portugues, Espanol,
Deutsch, Nederlands: insert the con-
figuration CD-rom).
This provides access to successive
confirmation windows.
Define the vehicle parameters
This enables you to activate or de-
activate certain driving and comfort
functions:
- wiper linked with reverse gear,
- automatic switching on of the
lights,
- "follow-me-home" lighting and du- ration,
- parking assistance. Example:
"Automatic switching on of
the lights"
Display configuration"Configuration" menu

2MULTIFUNCTION DISPLAYS
43
A FEW DEFINITIONS...
Superimposed display
This is a window which appears tem-
porarily over the current application
to announce a change of status of
another application.
Permanent application
This is the main application currently
in use, displayed as the main screen
window.
Contextual menu
This is a menu, limited to the main
functions of the main application cur-
rently in use, displayed as the main
screen window.
You can connect video equipment
(camcorder, digital camera, DVD
player, ...) to the three audio/video
sockets, located in the glove box.
Videos can only be displayed
when stationary. Select the
"Video" menu from the
general menu :
- "Activate video mode" to activate/ deactivate the video,
- "Video parameters" to set the dis- play format, the brightness, the
contrast and the colours.
Pressing the "MODE" or "DARK"
button disconnects the display from
the video.
Successive presses on the
"SOURCE" button permit the selec-
tion of an audio source other than
that of the video.
For safety reasons, configu-
ration of the multifunction
displays by the driver must
take place when stationary.
"Video" menu

3COMFORT
44

3COMFORT
45
VENTILATION
1. Windscreen de-icing or
demisting vents.
2. Front window de-icing or
demisting vents.
3. Side vents.
4. Centre vents.
5. Air outlet to front footwells.
6. Air outlet to rear footwells.
Advice on operation
 If, when the vehicle has been
parked in the sun for a long time,
the interior temperature remains
very high, do not hesitate to ven-
tilate the passenger compartment
for a few minutes.
Place the air flow control at a level sufficient to ensure a good renew-
al of air in the passenger compart-
ment.
When the air flow control is in posi- tion 0 (deactivation of the system),
temperature related comfort is no
longer guaranteed but a slight flow
of air, due to the movement of the
vehicle, can still be felt.
 For even air distribution, take care
not to obstruct the exterior air in-
take grille at the base of the wind-
screen, the vents, the air outlets
under the front seats and the air
extractor located behind the flaps
in the boot.
Check that the passenger com- partment filter is in good condition.
Have the filters replaced regularly.
If you drive in a dusty environment,
change them twice as often.
Switch off the rear screen
and exterior mirrors demist-
ing as soon as you consider
this necessary as reducing
the current consumption reduces the
fuel consumption.

3COMFORT
46
The air conditioning only operates
when the engine is running.2. Temperature adjustment
1. Air conditioning On/Off
Turn the control from blue
(cold) to red (warm) to ad-
just the temperature to your
requirements.4. Air distribution adjustment
Windscreen and side
windows.
Windscreen, side windows
and footwells.
Footwells
(vents closed).
The air conditioning is de-
signed to operate effectively
in all seasons, with the win-
dows closed. In summer, it
enables the temperature to
be lowered and in winter, above 0 °C,
it increases the effectiveness of the
demisting.
Press the switch, the indicator light
comes on.
The air conditioning does not op-
erate while the air flow adjustment
control 3 is in position "0" . Centre and side vents.
3. Air flow adjustment Turn the control from posi-
tion 1 to position 4 to obtain
an air flow sufficient to en-
sure your comfort. The air distribution can be adjusted
by placing the control in an interme-
diate position, marked
" ".
AIR CONDITIONING

3COMFORT
47
6. Demisting the rear screen and the mirrors
Pressing the button once
demists the rear screen
and the exterior mirrors.
This switches off automati-
cally to prevent an exces-
sive consumption of current.
Pressing again reactivates demisting.
It is possible to stop demisting be-
fore it is switched off automatically by
pressing the button again. In certain cases of particu-
larly arduous use (towing the
maximum load on a steep
gradient in high tempera-
tures), switching off the air condition-
ing permits the recovery of engine
power and therefore an increase in
the towing capacity.
In order for the air conditioning to be
fully effective, the windows must be
closed.
The air conditioning system does not
contain chlorine and does not present
any danger to the ozone layer.
Operate the air conditioning system
for 5 to 10 minutes, once or twice a
month, to keep it in perfect working
order.
The water produced by the air con-
ditioning condensation is discharged
through an opening provided for this
purpose. Therefore, a puddle of wa-
ter may form underneath the vehicle
when stationary.
In order to ensure that the air con-
ditioning system operates correctly,
regular checks are also recommend-
ed.
If the system does not produce cold air,
do not use it and contact a PEUGEOT
dealer.
5. Air intake/Air recirculation
Pressing button 5 permits
recirculation of the interior
air. This is indicated by il-
lumination of the indicator
light.
As soon as possible, press button
5 again to permit the intake of out-
side air, to prevent deterioration of
the air quality and to avoid misting of
the windows. This is indicated by the
switching off of the indicator light.
The interior air recirculation enables
you to isolate the passenger com-
partment from exterior odours and
smoke.
The outside air intake enables you to
prevent and eliminate misting of the
windscreen and side windows.
Used simultaneously with the air con-
ditioning, air recirculation enables
performance to be improved.
Used in a humid climate, air recir-
culation may result in misting of the
windows.
Rapid demisting of the
windscreen
To quickly de-ice or demist the wind-
screen and side windows:
- place the air distribution control in the "windscreen and side windows"
position,
- place the temperature 2 and air
flow 3 controls at maximum, as
indicated by the "Windscreen and
side windows" symbol on the con-
trol panel,
- close the centre vents,
- switch air intake button 5 to the
"Outside Air Intake" position (but-
ton 5 indicator light off),
- start the air conditioning by press- ing button 1.

3COMFORT
48
The air conditioning only operates
when the engine is running.When the engine is cold, to prevent
too great a distribution of cold air, the
air flow will reach its optimum level
gradually.
The driver and his front
passenger can each adjust
the temperature to their re-
quirements.
The value indicated on the
display corresponds to a level of
comfort and not to a temperature in
degrees Celsius or Fahrenheit.
Turn control 2 or 3 to the left or to
the right respectively to decrease or
increase this value.
A setting around the value 21 provides
optimum comfort. However, depend-
ing on your requirements, a setting be-
tween 18 and 24 is normal. For optimum comfort, you are ad-
vised to avoid a left/right setting dif-
ference of more than 3.
For maximum cooling or heating of the
passenger compartment, it is possible
to go below the value 15 by turning un-
til
"LO" is displayed or above the value
27 by turning until "HI" is displayed.
4. Automatic visibility programme
The automatic comfort pro-
gramme may not be suf-
ficient to quickly demist or
de-ice the windscreen and
side windows (humidity,
several passengers, ice, etc.).
In this case, select the automatic vis-
ibility programme.
The system automatically controls
the air conditioning, the air flow and
the air intake and provides optimum
distribution of the ventilation to the
windscreen and side windows.
To switch it off, press button 4 again
or press the "AUTO" button, the but-
ton’s indicator light switches off and
"AUTO" is displayed.
Automatic operation
1. Automatic comfort
programme
Press the "AUTO" button.
The "AUTO" symbol is
displayed.
We recommend the use of
this mode: it permits auto-
matic and optimised adjust-
ment of all of the functions, passenger
compartment temperature, air flow,
air distribution and air recirculation,
in accordance with the comfort value
that you have chosen. This system is
designed to operate effectively in all
seasons, with the windows closed. 2. Driver’s side adjustment
3. Passenger side adjustment On entering the vehicle, if
the interior temperature is
much colder or warmer than
the comfort value, there is no
need to change the value displayed
in order to obtain the comfort re-
quired. The system corrects the dif-
ference in temperature automatically
and as quickly as possible.
DUAL ZONE AUTOMATIC AIR CONDITIONING