Peugeot 307 SW Dag 2007.5 Owner's Guide

29
INSTRUMENTS and CONTROLS
- the current information tab with:

30
INSTRUMENTS and CONTROLS Distance remaining to be
travelled
(km or miles)
This is the distance remain-
ing to be travelled to the i nal destina-
tion. It is either calculated instantly by
the navigation system if guidance is
activated, or entered by the user.
If the distance is not entered, dashes
are displayed in place of the digits.
Average speed
(km/h or mph)
This is the average speed
calculated since the last
trip computer zero reset
(ignition on).
Range
(km or miles)
This indicates the number
of miles (or kilometres)
which can still be travelled with the
fuel remaining in the tank in relation
to the average consumption over the
last few miles (kilometres) travelled. Current consumption
(l/100 km or km/l or mpg)
This is the average quantity
of fuel consumed over the
last few seconds.
Average consumption
(l/100 km or km/l or mpg)
This is the average quan-
tity of fuel consumed since
the last trip computer zero reset.
Distance travelled
(km or miles)
This indicates the dis-
tance travelled since the
last trip computer zero
reset.
A few definitions…
When the range falls below 20 miles
(30 km), dashes are displayed. After
i lling with at least 5 litres of fuel, the
range is recalculated and is displayed
when it exceeds 60 miles (100 km).
If dashes are displayed con-
tinuously while driving in
place of the digits, contact a
PEUGEOT dealer. This function is only displayed
from 20 mph (30 km/h).
This i gure may increase fol-
lowing a change of driving
style or relief, resulting in a
signii cant change in the cur-
rent consumption.

31
INSTRUMENTS and CONTROLS
Display C

 Press the "MENU" button to gain
access to the general menu.

 Press the arrows, then the "OK"
button to select the "Trip compu-
ter" menu.

 On the "Trip computer" menu,
select one of the following appli-
cations:
Warnings log
This summarises the active warning
messages, displaying them in suc-
cession on the multifunction display.
Status of the functions
This summarises the active or inac-
tive status of the functions present on
the vehicle.
Enter the distance to the
destination
This enables you to enter an approxi-
mate value for the distance to the i -
nal destination.
"TRIP COMPUTER" MENU
System which provides general in-
formation concerning the status of
certain equipment with which your
vehicle is equipped, such as the
warnings log, the status of the func-
tions...
"DIAGNOSTICS" MENU

 On the "Diagnostics" menu, se-
lect one of the following applica-
tions:
Colour display

 Press the "MENU" button to gain
access to the general menu.

 Turn the dial and press it to select
the "Diagnostics" menu.

32
MULTIFUNCTION DISPLAYS
Presentation
This displays the following informa-
tion:
- the time,
- the date,
- the outside temperature * (this l ashes if there is a risk of ice),
- the status of the accesses (doors, boot, ...),
-
the warning messages (e.g.:
"Emission control system faulty")
or information messages (e.g.:
"Auto lights on"), displayed tempo-
rarily, can be cleared by pressing
the "ESC" button,

- the trip computer (see corre- sponding section).
MONOCHROME DISPLAY A
(WITHOUT RD4 AUDIO EQUIPMENT)
Parameter configuration
There are three display control but-
tons:
- "ESC" to abandon the operation
in progress,
- "MENU" to scroll through the
menus or sub-menus,
- "OK" to select the menu or sub-
menu required. Press the
"MENU" button to scroll
through the various menus of the
general menu:
- vehicle coni guration,
- options,
- display settings,
- languages,
- units.
Press the "OK" button to select the
menu required. General menu
* With air conditioning only.

33
MULTIFUNCTION DISPLAYS
Once the "Vehicle coni guration"
menu has been selected, you can
activate or deactivate the following
equipment:
- wiper linked with reverse gear (refer to the "Visibility" section),
- "follow-me-home" lighting (refer to the "Visibility" section),
- parking assistance (refer to the "Driving" section).
Options
Once the "Options" menu has been
selected, you can start diagnostics of
the status of the equipment (active,
not active, faulty). Languages

Once the "Languages" menu has been
selected, you can change the language
used by the display (Français, Italiano,
Nederlands, Portugues, Portugues-
Brasil, Deutsch, English, Espanol).

Display settings
Once the "Display settings" menu
has been selected, you can gain
access to the following settings:
- year,
- month,
- day,
- hour,
- minutes,
- 12 or 24 hour mode.
Units
Once the "Units" menu has been
selected, you can change the units of
the following parameters:
- temperature (°C or °F),
- fuel consumption (l/100, mpg or
km/l).
Once you have selected a setting,
press the "OK" button to change its
value.
Wait for approximately ten sec-
onds without any action to allow the
changed data to be recorded or press
the "ESC" button to cancel.

The display then returns to the normal
display. For safety reasons, coni gu-
ration of the multifunction
displays by the driver must
take place when stationary.
Vehicle coni guration

34
MULTIFUNCTION DISPLAYS
MONOCHROME DISPLAY A
Press the "MENU" button to gain ac-
cess to the general menu, then press
the " " or " " buttons to scroll
through the following items:
- radio-CD,
- vehicle coni guration,
- options,
- display settings,
- languages,
- units.
Press the "OK" button to select the
menu required.
Presentation
This displays the following informa-
tion, via the RD4 audio equipment
control keypad:
- the time,
- the date,
- the outside temperature * (this
l ashes if there is a risk of ice),
- the audio source displays (radio, CD, ...),
- the status of the accesses (doors, boot, ...),
-
the warning messages (e.g.:
"Emission control system faulty")
or information messages (e.g.:
"Auto lights on"), displayed tempo-
rarily, can be cleared by pressing
the "ESC" button
,
- the trip computer (see corre- sponding section). Radio-CD
With the RD4 audio equipment
switched on, once the "Radio-CD"
menu has been selected, you can
activate or deactivate the functions
linked with the use of the radio (RDS
following, REG mode), the CD or the
CD changer (introscan, random play,
CD repeat).

For further details concerning the
"Radio-CD" application, refer to the
RD4 part of the "Audio and Telematics"
section. Once the "Vehicle coni guration"
menu has been selected, you can
activate or deactivate the following
equipment:
- rear wiper linked with reverse
gear (refer to the "Visibility" sec-
tion),
- "follow-me-home" lighting (refer to the "Visibility" section),
- parking assistance (refer to the "Driving" section).
Options
Once the "Options" menu has been
selected, you can start diagnostics of
the status of the equipment (active,
not active, faulty).
General menu
Vehicle coni guration
* With air conditioning only.

35
MULTIFUNCTION DISPLAYS
Display settings
Once the "Display settings" menu
has been selected, you can gain ac-
cess to the following settings:
- year,
- month,
- day,
- hour,
- minutes,
- 12 or 24 hour mode. Languages

Once the "Languages" menu has been
selected, you can change the language
used by the display (Français, Italiano,
Nederlands, Portugues, Portugues-
Brasil, Deutsch, English, Espanol
).
Units
Once the "Units" menu has been se-
lected, you can change the units of
the following parameters:
- temperature (°C or °F),
- fuel consumption (l/100, mpg or km/l).
Once you have selected a setting,
press the " " or " " buttons to
change its value.
Press the " " or " " buttons to
move to the previous or next setting
respectively.
Press the "OK" button to record the
change and return to the normal dis-
play or press the "ESC" button to
cancel.
For safety reasons, coni gu-
ration of the multifunction
displays by the driver must
take place when stationary.

36
MULTIFUNCTION DISPLAYS
Presentation
It displays the following information:
- the time,
- the date,
- the exterior temperature (this l ashes if there is a risk of ice),
- the accesses check (doors, boot, ...),
- the warning messages (e.g.: "Depollution system faulty") or
information messages (e.g.: "Au-
tomatic headlamp lighting acti-
vated"), displayed temporarily,
can be cleared by pressing the

"ESC" button,
- the trip computer (see corre- sponding section),
MONOCHROME DISPLAY C
(WITHOUT RD4 AUDIO EQUIPMENT)
There are three buttons and a navi-
gator to enable you to control the
screen:
- "MENU" to display the general
menu,
- "MODE" to change the perma-
nent application (trip computer,
date, ...),
- "ESC" to abandon the operation
in progress,
- Rotation of the navigator: move-
ment on the display or changing
of a setting,
- Press on the navigator: coni r-
mation of the selection. Press the
"MENU" button to access
the general menu:
- trip computer (see corresponding section),
- personalisation-coni guration.
Turn the navigator to select the menu
required, then coni rm by pressing
the navigator.
Once this menu has been selected,
you can access the following func-
tions:
- dei ne the vehicle parameters,
- display coni guration,
- selection of the language.
Parameter configuration General menu
"Personalisation-
Configuration" menu

37
MULTIFUNCTION DISPLAYS Selection of the language
Once this menu has been selected,
you can change the language used
on the display (Deutsch, English,
Espanol, Français, Italiano, Neder-
lands, Portugues, Portugues-Brasil).
Display coni guration
Once this menu has been selected,
you can access the following set-
tings:
- brightness-video setting,
- date and time setting,
- selection of the units.
Example: "Duration of the "follow-
me-home" lighting"
For safety reasons, coni gu-
ration of the multifunction
displays by the driver must
take place when stationary.
Dei ne the vehicle parameters
Once this menu has been selected,
you can activate or deactivate the fol-
lowing equipment:
- wiper linked with reverse gear
(refer to the "Visibility" section),
- "follow-me-home" lighting and duration (refer to the "Visibility"
section),
- parking assistance (refer to the "Driving" section).
Once you have selected a setting,
press the navigator.

Turn the navigator to change its value.
Press the navigator to record the
change and move on to the next set-
ting or press the "ESC" button to
cancel.

38
MULTIFUNCTION DISPLAYS
MONOCHROME SCREEN C
Controls
From the RD4 audio equipment con-
trol panel, you can:

 press the "MENU" button to gain
access to the general menu ,

 press the "  " or "  " buttons to
scroll through the items on the
screen,


press the "MODE" button to
change the permanent application
(trip computer, audio source, ...),


 press the "  " or "  " buttons to
change a setting value,


press the "OK" button to coni rm,
or

 press the "ESC" button to aban-
don the operation in progress.
Displays on the screen
This displays the following informa-
tion:
- the time,
- the date,
- the outside temperature * (this
l ashes if there is a risk of ice),
- the status of the accesses (doors, boot, ...),
- the audio sources (radio, CD, ...),

- the trip computer (refer to the cor- responding section).
Warning messages (e.g.: "Emission
control system faulty") or information
messages (e.g.: "Automatic switch-
ing on of the headlamps activated")
may appear temporarily. These can
be cleared by pressing the "ESC"
button. General menu

 Press the "MENU" button to gain
access to the general menu :
- audio functions,
- trip computer (refer to the corresponding section),
- personalisation-coni guration,
- telephone (hands-free kit).

 Press the "  " or "  " buttons to
select the menu required, then
coni rm by pressing the "OK"
button.
* With air conditioning only.
"Audio functions" menu
With the RD4 audio equipment
switched on, once this menu has
been selected you can activate or de-
activate the functions linked with use
of the radio (RDS, REG, RadioText),
the CD or the CD changer (introscan,
shufl e, CD repeat).
For further details concerning the
"Audio functions" application, refer to
the RD4 part of the "Audio and Tele-
matics" section.
"Trip computer" menu

Once this menu has been selected,
you can consult information concerning
the status of the vehicle (warnings log,
status of the functions, ...).