Peugeot 407 C 2010.5 Service Manual

3
Fan (4)
Air fl ow
 Turn dial 4 to the
right to increase the
air fl ow or to the left
to reduce it.

 Turn the dial 4 to the
left until the fl ow of
air stops.
The "OFF" symbol is displayed in the
multifunction screen.
This action switches off the display
and the indicator lamps.
It deactivates all of the system's func-
tions, with the exception of the rear
screen demisting.
The temperature-related comfort is no
longer controlled (temperature, humidity,
odour, condensation).
Avoid driving for too long with the air
conditioning off.
Switching off the ventilation
The
"AUTO" button indicator lamp
goes off.
The air fl ow symbol (fan) is displayed
in the multifunction screen and is fi lled
according to the setting.
To prevent condensation and dete-
rioration of the quality of the air in the
passenger compartment, ensure that
an adequate fl ow of air is maintained. Adjustment of
the driver's air
distribution (5)
Successive or continuous pressure on
button 5 or 6 enables you to direct the
fl ow of air on the driver's side or on the
passenger side independently.
The "AUTO" button indicator lamp
goes off.
The symbol (arrows) corresponding to
the chosen direction 5 or 6 is displayed
in the multifunction screen.

 Windscreen and front side windows.

 Front and rear ventilation.

 Front and rear footwells.
AUTO Automatic distribution. Adjustment of the
passenger's air
distribution (6)
Manual control
It is possible to adjust one or more
functions manually while leaving the
other functions in automatic mode.
Switching to manual mode may result
in discomfort (temperature, humidity,
odour, condensation) and is not ad-
vantageous (comfort).
To return to automatic mode, press the

"AUTO" button.
On entering the vehicle, the
interior temperature may be
much colder (or warmer) than
is comfortable. There is no
need to change the temperature dis-
played in order to obtain rapidly the
level of comfort required.
The automatic regulation of the air
conditioning settings is used to correct
the temperature difference as quickly
as possible.

To reactivate the air conditioning:

 Press button 1 .

3
42
Front visibility
control (7)
In certain cases, the comfort pro-
gramme may not be suffi cient to dem-
ist or defrost the windows (humidity,
several passengers, ice).

 In this case, select the front vis-
ibility programme in order to clear
the windows quickly. The indicator
lamp comes on.
It controls the air conditioning, air fl ow
and intake and distributes the ventila-
tion to the windscreen and front side
windows.
The front visibility control symbol is
displayed in the multifunction screen.
Once the screen is clear, press
button 1 to return the system to the
comfort setting. Intake of exterior
air/Recirculation of
interior air (8)
This function enables you to isolate
the passenger compartment from ex-
terior fumes and odours.


Press button 8 several times to set
the air intake mode, the indicator
lamp which corresponds to the mode
set comes on at your preference:
- intake of exterior air. Forced ex- terior air intake mode.
- recirculation of the air inside the passenger compartment.
The indicator lamp which corre- sponds to the mode set comes
on. Prolonged operation in inte-
rior air recirculation mode may
result in the formation of con-
densation and deterioration of
the quality of the interior air.
Do not drive in air recirculation mode for prolonged periods,
except in truly exceptional at-
mospheric conditions.
The message associated with the control is displayed in the
multifunction screen.

 Press button 8 to return to auto-
matic control of the air intake. The
indicator lamps go off.

For your comfort, when the igni-
tion is switched off, the settings are
stored until it is switched on again. Rear screen
demisting (9)
The heated rear screen operates
independently of the air conditioning
system.

 Press button 9 , with the engine
running, to demist the rear screen
and the door mirrors. The indicator
lamp comes on.
Demisting is switched off automatically
to avoid an excessive consumption of
current and according to the ambient
temperature.
It may be stopped by pressing button 9
again or when the engine is switched off.
However, the demisting resumes if
the engine is switched on again within
one minute.
Switch off the rear screen and exte-
rior mirrors demisting when no longer
needed as lowering current consump-
tion reduces fuel consumption.

3
43
Deactivation of the air conditioning
(A/C-OFF)
Deactivation or activation of the
simultaneous Left-Right control
Activation of this function transfers the
driver's settings to the passenger.
Deactivation of this function allows a
return to the independent driver/pas-
senger settings.
Any manual action on button 4 or 6
cancels the simultaneous confi gura-
tion setting.
"AIR CON" menu
Press the
"MENU" but-
ton for access to the main
menu, then confi rm.
The "Main menu" appears in the mul-
tifunction screen.
Select the Air Conditioning icon using
the navigator buttons.
The "Air Conditioning" menu ap-
pears in the multifunction screen as
the main display.

Additional heating *
Vehicles which are fi tted with an HDI
engine may be equipped with auto-
matic additional heating to improve
your comfort.
When the engine is idling or when the
vehicle is stationary, a high-pitched
whistling noise and the emission of a
small amount of smoke and odour is
normal.
* According to country.
Deactivation may result in discomfort
(temperature, humidity, odour, conden-
sation).
You can cancel the deactivation by
pressing the
"AUTO" button on the air
conditioning control panel.

3
44
PROGRAMMABLE HEATING Programming remote control
The heating system programming re-
mote control comprises the following
buttons and displays:

1. Scrolling functions menu buttons.

2. Function indicator lamps: clock,
temperature, operating time, pro-
grammed time, heater operation,
heating management symbols.

3. Digital displays: time, temperature,
duration of operation, programmed
time or level of heating.

4. Off button.

5. On button.
Displaying the functions

If a malfunction of the programmable
heating system occurs, contact a
PEUGEOT dealer.
The programmable heating operates
independently of the engine.
When the engine is off, it pre-heats
the coolant circuit in order to benefi t
from an optimum engine operating
temperature from the time the engine
is switched on.
The programmable heating system
is switched on using the long range
remote control. Activation can be im-
mediate or deferred by means of a
programming function.
screen
Press the buttons 1 in succession to
display the functions.
The fi rst press of the left-hand or right-
hand button displays the time.
Next, the left-hand button gives ac-
cess to the programming time then to
the level of heating (C1 to C5).
The right-hand button permits access
to the passenger compartment temper-
ature then to the duration of operation
of the heater if it is to be switched on
immediately.
The passenger compartment
temperature information is
only available when the en-
gine is off.

3
45
Once the time has been displayed,
by means of the buttons 1 , press but-
tons 4 and 5 simultaneously within
10 seconds.
This symbol fl ashes.
Setting the time
Set the time using the buttons 1 .
Press buttons 4 and 5 simultaneously
to save it.
This symbol is displayed (fi xed). Press button
5 (ON) until the message

"OK" appears.
When the signal has been received,
the message "OK" is displayed along
with the duration of operation.
The heater starts and this symbol
is displayed.
Immediate activation
To deactivate the function, press but-
ton 4 (OFF) until the message "OK"
appears.
When carrying out these oper-ations, if the message "FAIL"
appears, the signal has not
been received. Repeat the
procedure after changing your
location.
This symbol goes off.
Setting the duration of operation
Press the buttons
1 to display the
duration of operation.
This symbol is displayed.
Once the duration of operation has
been displayed, press buttons 4 and 5
simultaneously within 10 seconds.
This symbol fl ashes.
Set the duration by pressing the but-
tons 1 (adjustment in steps of 10 mins
and max value 30 mins).
Press buttons 4 and 5 simultaneously
to save the duration of operation.
This symbol is displayed (fi xed). The factory setting value is
30 minutes.

3
46
You must programme your departure
time in order for the system to cal-
culate the optimum heater start time
automatically.
Programming the heating
Set the time by pressing the buttons 1
and press buttons 4 and 5 simultane-
ously to save it.
Programming the departure time
Press the buttons
1 to display the
programming time.
This symbol is displayed.
Once the programming time has been
displayed, press buttons 4 and 5 si-
multaneously within 10 seconds.
This symbol fl ashes.
This symbol is displayed (fi xed). Once the programming time has been
displayed by means of the buttons
1 ,
press button 5 (ON) until the message

"OK" appears.
Activation - deactivation

When the signal has been received,
the message "OK" is displayed
along with the "HTM" symbol.
To deactivate the programming, press
button 4 (OFF) until the message

"OK" appears.
HTM: Heat Thermo Management.
The symbol "HTM" goes off.
When carrying out these oper-
ations, if the message "FAIL"
appears, the signal has not
been received. Repeat the
procedure after changing your
location. This symbol is displayed when
the heater starts.
Switching off the heating
Press button
5 (ON).
The symbol "HTM" remains on.
Changing the level of heating
The system offers 5 levels of heating
(from the lowest level C1 to the high-
est level C5 ).
Once the level of heating has been
displayed by means of the buttons 1 ,
press buttons 4 and 5 simultaneously.
The letter "C" fl ashes.
Set the level of heating by pressing
the buttons 1 . Press buttons 4 and 5 simultaneously to save the level selected. The letter "C"
is displayed (fi xed).
The factory pre-sets are re-
placed by the new settings
entered. The programmed
times are stored until the next
time they are changed.
When the departure time is acti-
vated, the level of heating cannot be
changed. The departure time must be
deactivated fi rst.

3
Always switch off the programmable
heating while fi lling with fuel to avoid
any risk of fi re or explosion.
To avoid any risk of poisoning and
asphyxiation, the programmable heat-
ing must not be used, even for short
periods, in an enclosed space such
as a garage or workshop which is not
equipped with an exhaust gas extrac-
tion system.
Do not park the vehicle on an infl am-
mable surface (dry grass, dead leaves,
paper…), there is a risk of fi re.
The programmable heating system
is supplied by the vehicle's fuel tank.
Before use, ensure that the quantity
of fuel remaining is suffi cient. If the
fuel tank is at the reserve, we strongly
advise that you do not programme the
heating.
Changing the battery
The remote control is supplied by a
6V-28L battery, which is supplied.
Information on the display indicates
when it is time to replace this battery.
Unclip the casing then replace the bat-
tery.
The remote control must then be reini-
tialised, see below.
Do not discard the used batteries, take
them to an approved collection point. Reinitialising the remote
control
If the vehicle's battery is discon-
nected or the remote control's
battery is replaced, the remote control
must be reinitialised.
After switching on the power, press
button 4 (OFF) for 1 second within the
next 5 seconds. If the operation has
taken place correctly the message

"OK" is displayed in the remote con-
trol screen.
If a problem occurs, the message

"FAIL" appears. Repeat the operation.
As an accessory, your programmable
heating can be adapted to pre-heat your
vehicle's passenger compartment.

3
48
DOOR MIRRORS
Automatic tilting of the mirrors in reverse gear *
This function allows you to see the
ground (kerb, wall...) when carrying
out parking manoeuvres in reverse
gear.
Objects observed in the driver
and passenger mirrors are, in
reality, closer than they appear.
This must be taken into ac-
count in order to judge the distance of
vehicles approaching from behind cor-
rectly.
Adjustment

 Move control A to the right or to
the left to select the corresponding
mirror.

 Direct control B in all four direc-
tions to adjust .
Folding back the mirrors
electrically
- from inside:
 With the ignition on, move the
control A to the central position
then pull it rearwards.
- from outside:

 Lock the vehicle using the re-
mote control.
This function can be deactivated.
Consult a PEUGEOT dealer.
When the vehicle is parked, the door
mirrors can be folded back manually. Initial setting of the function
Engage reverse gear then select and ad-
just the left mirror then the right mirror.
These settings will be stored.
Tilting the mirror to the parking
position

 engage reverse gear,

 move control A to the right or the
left to select the corresponding
mirror.
The door mirror corresponding to the
side on which you are parking tilts
downwards.
Intentional return of the mirror to the
driving position:

 deselect the mirror.

 change out of reverse gear. After
a few seconds, the glass of the
corresponding mirror resumes its
normal position.
The mirror returns to the driving posi-
tion automatically if the vehicle speed
exceeds 6 mph (10 km/h) or if the en-
gine is switched off.
* According to version.

3
49
In order to ensure optimum vis-
ibility during your manoeuvres,
the mirror lightens automati-
cally when reverse gear is en-
gaged.
By means of a sensor, which mea-
sures the light from the rear of the ve-
hicle, this system automatically and
progressively changes between the
day and night uses.
It has an anti-dazzle system which
darkens the mirror glass: this reduces
any driver discomfort caused by the
light beams of following vehicles, the
sun...
Automatic day/night model
Rear view mirror
Adjustable mirror providing a central
rearward view.
Equipped with an anti-dazzle system,
useful in poor light.

3
50
ELECTRIC ADJUSTMENT OF STEERING WHEEL HEIGHT AND REACH
When stationary, adjust the height or
reach of the steering wheel by moving
the control:

 forwards or backwards to adjust
the reach.

 up or down to adjust the height.
You can activate or deac-
tivate this function via the
"personalisation - confi gu-
ration" menu in the multi-
function screen.
WELCOME FUNCTION
When the driver's door is opened with
the ignition off, the steering wheel rises
to make access to or exit from the ve-
hicle easier. MANUAL ADJUSTMENT OF STEERING WHEEL HEIGHT AND REACH
When the vehicle is stationary, un-
lock the steering wheel adjustment by
pushing the lever forwards.
Adjust the height and reach of the
steering wheel then lock the adjust-
ment by pulling the lever fully back.
Reinitialisation
Following reconnection of the battery,
the welcome function must be reini-
tialised:
- move the control in the direction of the required adjustment,
- release the control,
- move the control again until it reaches its stop.
This procedure must be carried out for
all four directions.