Peugeot 407 C Dag 2008 Owner's Manual
Page 151 of 211
11
2 2
3 3
4 4
5 5
6 6
7 7
0 3
138
For improved visibility, beyond the scale of 10 km, the map automatically switches to North Orientation.
Turn the dial and select the MAP function.
Press the MENU button.
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
Turn the dial and select the 3D VIEW tab.
Select OK and press the dial t o c o n fi r m . Turn the dial and select the MAP ORIENTATION function.
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
3 D V I E W
GPS
M A P O R I E N T A T I O N
3 D V I E W
OK
Page 152 of 211
11
2 2
3 3
4 4
5 5
6 6
7 7
0 3
139
Press the MENU button.
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
Turn the dial and select the MAP function.
Turn the dial and select the MAP IN WINDOW or FULL SCREEN MAP tab.
Select OK and press the dial t o c o n fi r m .
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
Turn the dial and select the DISPLAY MAP function.
D I S P L A Y I N G T H E M A P I N A W I N D O W O R
I N F U L L S C R E E N M O D E
GPS
D I S P L A Y M A P
F U L L S C R E E N M A P
OK
M A P I N W I N D O W
Page 153 of 211
11
2 2
3 3
4 4
5 5
9 9
8 8
7 7
6 6
0 3
140
A D D I N G A S T A G E
During guidance, press the MENU button.
Turn the dial and select the NAVIGATION GUIDANCE function.
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
Turn the dial and select the JOURNEY LEGS AND ROUTE function.
J O U R N E Y L E G S A N D R O U T E
Select OK and press the dial to c o n fi r m t h e o r d e r o f t h e s t a g e s .
When the new address has been entered, select OK and press the dial t o c o n fi r m .
Enter for example a new address.
Select the ADD A STAGE function ( 9 s t a g e s m a x i m u m ) a n d p r e s s t h e d i a l t o c o n fi r m .
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
The stage must be completed or deleted before the guidance can continue to the next destination. Otherwise, the WIP Com audio and telematics system will always guide you back to the previous stage.
E N T E R A N A D D R E S S
A D D A S T A G E
GPS
OK
OK
Page 154 of 211
11
2 2
3 3
4 4
5 5
6 6
7 7
8 8
141
A C T I V A T I N G T H E F I L T E R O N T H E R O U T E
W e r e c o m m e n d a fi l t e r o n t h e r o u t e a n d a fi l t e r a r o u n d t h e v e h i c l e o f : - 5 k m o r 1 0 k m f o r a r e g i o n w i t h h e a v y t r a f fi c , - 2 0 k m f o r a r e g i o n w i t h a n o r m a l l e v e l o f t r a f fi c , - 1 0 0 k m f o r l o n g j o u r n e y s ( m o t o r w a y ) .
Press the MENU button.
Turn the dial and select the TRAFFIC INFORMATION function.
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
F I L T E R T R A F F I C I N F O R M A T I O N
Turn the dial and select the FILTER TRAFFIC INFORMATION function.
P r e s s t h e d i a l t o c o n fi r m t h e selection.
G E O G R A P H I C F I L T E R
Select the GEOGRAPHIC FILTER f u n c t i o n a n d p r e s s t h e d i a l t o c o n fi r m .
Turn the dial and select the ON THE ROUTE tab.
OK
T R A F F I C I N F O R M A T I O N
Select OK and press the dial to c o n fi r m .
Page 155 of 211
11
2 2
3 3
4 4
6 6
5 5
7 7
0 4
142
Turn the dial and select the CONFIGURE MESSAGE ANNOUNCEMENT function.
Select the READ MESSAGES tab.
T h e T r a f fi c I n f o r m a t i o n M e s s a g e s w i l l be read by the voice synthesiser.
Select the NEW MESSAGE DISPLAY tab. T h e t r a f fi c i n f o r m a t i o n m e s s a g e s a r e e x t e n d e d t o t h e fi l t e r s s e l e c t e d ( g e o g r a p h i c . . . ) a n d c a n a l s o b e displayed when guidance is not active.
Press the MENU button.
N E W M E S S A G E D I S P L A Y
OK
C O N F I G U R I N G T H E T M C M E S S A G E
A N N O U N C E M E N T S
We recommend that you do not tick the NEW MESSAGE DISPLAY tab for r e g i o n s w i t h h e a v y t r a f fi c .
Turn the dial and select the TRAFFIC INFORMATION function.
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
T R A F F I C I N F O R M A T I O N
Select OK and press the dial to c o n fi r m .
R E A D M E S S A G E S
C O N F I G U R E M E S S A G E A N N O U N C E M E N T
Page 156 of 211
1
2 2
3 3
4 4
11
2 2
3 3
4 4
0 5
143
A U D I O / V I D E O
R A D I O
S E L E C T I N G A S T A T I O N
Press the SOURCE button several times in succession and select the RADIO.
Press the BAND button to select a waveband: FM1, FM2, FMast, AM.
B r i e fl y p r e s s o n e o f t h e b u t t o n s t o carry out an automatic search of the radio stations.
Press one of the buttons to carry out a manual search of the radio stations.
Press the LIST button to display the list of stations received locally ( 6 0 m a x i m u m ) . To update this list, press for more than two seconds.
T h e e x t e r n a l e n v i r o n m e n t ( h i l l s , b u i l d i n g s , t u n n e l s , b a s e m e n t c a r p a r k s , . . . ) m a y b l o c k r e c e p t i o n , including in RDS mode. This is a normal effect of t he way in which radio waves are transmitted and doe s not indicate any failure of the audio equipment.
R D S
Select ACTIVATE FREQUENCY F O L L O W I N G ( R D S ) t h e n p r e s s O K . RDS appears on the display.
Select the FM BAND PREFERENCES function then press OK.
Select AUDIO FUNCTIONS then press OK.
Press the MENU button.
The RDS, if displayed, enables you to continue lis tening to the same station by means of frequency following. Howev er, in certain conditions, this RDS station is not followed throughout the country as radio stations do not cover 100 % of the territory. This explains the loss of reception of the station during a journey.
F M B A N D P R E F E R E N C E S
A C T I V A T E F R E Q U E N C Y F O L L O W I N G ( R D S )
Page 157 of 211
11
2 2
0 5
144
A U D I O / V I D E O
M P 3 C D
The MP3 format, an abbreviation of MPEG 1.2 & 2.5 Audio Layer 3, is an audio compression standard which permits the recording of s e v e r a l t e n s o f m u s i c fi l e s o n a s i n g l e d i s c .
In order to be able to play a recorded CDR or CDRW , when recording it is preferable to select standards ISO 9660 level 1.2 or Joliet. If the disc is recorded in another format, it may not be played correctly. It is recommended that the same recording standard is always used f o r a n i n d i v i d u a l d i s c , w i t h a s l o w a s p e e d a s p o s s i b l e ( 4 x m a x i m u m ) for optimum sound quality. In the particular case of a multi-session CD, the Joliet standard is recommended.
T h e a u d i o e q u i p m e n t w i l l o n l y p l a y a u d i o fi l e s w i t h t h e e x t e n s i o n ".mp3" with a sampling rate of 22.05 KHz or 44.1 KH z. No other type o f fi l e ( . w m a , . m p 4 , m 3 u . . . ) c a n b e p l a y e d .
I t i s a d v i s a b l e t o r e s t r i c t fi l e n a m e s t o 2 0 c h a r a c t e r s w i t h o u t u s i n g s p e c i a l c h a r a c t e r s ( e . g . : " " ? ; ù ) t o a v o i d a n y p l a y i n g o r d i s p l a y i n g problems.
P L A Y I N G A C D O R A N M P 3 C O M P I L A T I O N
Insert circular compact discs only. Some anti-pira ting systems, on original discs or CDs copied using a personal recorder, may generate malfunctions regardless of the quality of the original player. Insert an audio CD or an MP3 compilation in the pl ayer, play begins automatically.
If the player already contains a disc, press the SOURCE button several times in succession and select CD to listen to it.
Press one of the buttons to select a track on the CD. Press the LIST button to display the list of tracks on the CD or of the directories of the MP3 compilation.
The playing and displaying of an MP3 compilation m ay depend on the recording programme and/or the parameter settin gs used. We recommend use of the ISO 9660 recording standard.
I N F O R M A T I O N A N D A D V I C E
C D
Page 158 of 211
2 2
3 3
11
5 5
6 6
4 4
145
C O P Y C D T O J U K E B O X
C O M P L E T E C D
C R E A T E A L B U M
OK
Select COPY CD TO JUKEBOX and p r e s s t h e d i a l t o c o n fi r m .
Select COMPLETE CD to copy the entire CD and press the dial to c o n fi r m .
Select CREATE ALBUM and press t h e d i a l t o c o n fi r m .
The AUTO CREATION tab automatically copies the CD by default into an album of the type "album n°...".
The audio or MP3 CD is copied onto the hard disc. Copying may take approximately 20 minutes depending on the dura tion of the CD. During this copying phase, it is not possible to listen to the albums previously recorded on the hard disc or the CDs.
Select the letters one by one and select O K t o c o n fi r m .
If it is not an MP3 CD, the Jukebox automatically compresses the CD in MP3 format. The compression may take appr oximately 20 minutes depending on the duration of the CD. During this compression phase, it is possible to listen to the CD or to albums previously recorded on the hard disc.
A long press on the SOURCE button starts the copyi ng of the CD.
When copying an MP3 CD, the Jukebox only retains t he last album l e v e l . I t i s n o t p o s s i b l e t o c o p y fi l e s f r o m t h e J u k e b o x t o a C D . T h e S T O P T H E C D C O P Y a c t i o n d o e s n o t d e l e t e t h e fi l e s w h i c h have already been transferred onto the jukebox hard disc.
Select AUDIO FUNCTIONS and press t h e d i a l t o c o n fi r m .
Insert a CD or an MP3 compilation and press the MENU button.
JUKEBOX FUNCTION
C O P Y I N G A C D O N T O T H E H A R D D I S C
Page 159 of 211
6 6
7 7
5 5
2 2
3 3
4 4
11
146
JUKEBOX
R E N A M E
J U K E B O X M A N A G E M E N T
R E N A M I N G A N A L B U M
Press the MENU button.
Select AUDIO FUNCTIONS and p r e s s t h e d i a l t o c o n fi r m .
Select the JUKEBOX function and p r e s s t h e d i a l t o c o n fi r m .
Select the JUKEBOX MANAGEMENT f u n c t i o n a n d p r e s s t h e d i a l t o c o n fi r m .
Select the album to be renamed and p r e s s t h e d i a l t o c o n fi r m .
Select the RENAME tab and press the d i a l t o c o n fi r m .
Turn the dial and select the letters of t h e a l b u m t i t l e o n e b y o n e c o n fi r m i n g each time by pressing the dial.
Use the alphanumeric keypad to enter the letters of the album title one by one.
JUKEBOX FUNCTION
Page 160 of 211
8 8 2 2
3 3
147
D E L E T E
OK
L I S T E N I N G T O T H E J U K E B O X
Press the SOURCE button several times in succession and select the JUKEBOX function.
Press the LIST button.
T u r n t h e d i a l t o s e l e c t t h e fi l e s .
P r e s s t h e E S C b u t t o n t o r e t u r n t o t h e fi r s t fi l e l e v e l .
JUKEBOX
Select OK and press the dial to c o n fi r m .
To rename the tracks of an album, follow the same procedure, selecting the tracks to be renamed.
Use the ESC button to exit from the list of tracks. Select the DELETE function to delete an album or a track from the Jukebox.
JUKEBOX FUNCTION