phone PEUGEOT 807 2002.5 Owners Manual

Monochrome screen CT
General menu
Press the "MENU" button to access
the general menu and select one of
the following applications :
• navigation guidance (see section "Satellite navigation system"),
• trip computer (see corresponding section),
• directory (see "RT3 audio/tele phone" section),
• telematics (see "RT3 audio/tele phone" section),
• configuration (see corresponding section).
MULTI–FUNCTION
SCREENS
Presentation
Monochrome screen B
This enables the following informa
tion to be displayed:
– the time,
– the date,
– the outside temperature (the °C
symbol flashes when there is a risk
of ice),
– the radio displays,
– the status of the openings (doors, bonnet...),
– the warning (e.g. "Battery charge fault") or information (e.g. "Passen
ger air bag disarmed") messages
displayed temporarily can be
cleared by pressing button 1or 2,
– the trip computer (see correspond ing section).
YOUR 807 IN DETAIL 35
Monochrome screen CT
and colour screen DT
These two systems are controlled by
the
RT3 audio/telephone keypad
and/or by a remote control keypad.
They enable the following informa
tion to be displayed:
– the time,
– the date,
– the outside temperature (a mes sage warns you when there is a
risk of ice),
– the audio source displays (radio, CD, ...),
– the telematic system displays (telephone, services, ...),
– the status of the openings (doors, bonnet, ...),
– the warning messages (e.g. "Fuel level low") and vehicle functions
status messages (e.g. "Passenger
air bag disarmed"), displayed tem
porarily,
– the trip computer display (see cor responding section),
– the satellite navigation system dis plays (see corresponding section).
Note: to enable you to use all of your
system's functions, you have two CD
ROMs: one, "Configuration", con
tains the software and the various
display and spoken information
languages, the other, "Navigation",
contains the satellite navigation
system map data.
18-11-2002

YOUR 807 IN DETAIL
36
configuration (see corresponding
section).
map (see section "Satellite naviga tion system")
A few definitions
Superimposed display:
a window appears over the current
application for a short while, to
announce a change of status of
another application.
Permanent application:
main application currently in use,
displayed in the main screen win
dow.
Contextual menu:
limited menu associated with the
main application currently in use,
displayed in the main screen win
dow.
Colour screen DT
General menu
Press the
"MENU" button to access
the general menu and select one of
the following applications:
navigation guidance (see section "Satellite navigation system"),
trip computer (see corresponding section),
directory (see "RT3 audio/tele phone" section),
telematics (see "RT3 audio/tele phone" section),Parameter configuration
Monochrome screen B
Press button 1for two seconds to
gain access to the settings .
Then, each press of this button permits
scrolling of the various parameters.
– language of the information dis played,
– unit of speed (km or miles),
– unit of temperature (degrees Cel cius or Fahrenheit),
– time format (12 or 24 hours),
– hour,
– minute,
– year,
– month,
– day.
Pressing button 2enables you to
change the parameter selected.
Continue pressing the button for
rapid scrolling.
After ten seconds without action, the
screen returns to the usual display,
the modified data are recorded.
18-11-2002

YOUR 807 IN DETAIL
36
configuration (see corresponding
section).
map (see section "Satellite naviga tion system")
A few definitions
Superimposed display:
a window appears over the current
application for a short while, to
announce a change of status of
another application.
Permanent application:
main application currently in use,
displayed in the main screen win
dow.
Contextual menu:
limited menu associated with the
main application currently in use,
displayed in the main screen win
dow.
Colour screen DT
General menu
Press the
"MENU" button to access
the general menu and select one of
the following applications:
navigation guidance (see section "Satellite navigation system"),
trip computer (see corresponding section),
directory (see "RT3 audio/tele phone" section),
telematics (see "RT3 audio/tele phone" section),Parameter configuration
Monochrome screen B
Press button 1for two seconds to
gain access to the settings .
Then, each press of this button permits
scrolling of the various parameters.
– language of the information dis played,
– unit of speed (km or miles),
– unit of temperature (degrees Cel cius or Fahrenheit),
– time format (12 or 24 hours),
– hour,
– minute,
– year,
– month,
– day.
Pressing button 2enables you to
change the parameter selected.
Continue pressing the button for
rapid scrolling.
After ten seconds without action, the
screen returns to the usual display,
the modified data are recorded.
18-11-2002

YOUR 807 IN DETAIL
38
The remote keypad
This permits selection and validation
of the functions, commands and
parameters, displayed on the mono
chrome screen and the DT colour
screen .
It is located next to the gear lever. The knob has two functions:
–
Rotation of the knob:
This enables you to move aroundthe screen and thus select a function.
It also permits: – with a " setting" type parameter, following selection, increasing or decreas
ing of the value,
– with a " list" type parameter, after opening the list, scrolling of the values,
– with guidance on a map, increasing or decreasing of the zoomfactor.
– Pressing the knob
This permits:– access to the list of commands (contextrelated menu) of the permanent
application displayed, if no superimposed display appears,
– validation of the selected function or of the modified value,
– selection of a "setting " or "list" type parameter in order to modify it.
"MODE" button:
– Brief press: modification of the permanent application displ ay (audio
equipment, navigation/guidance, ...)
– Pressing for more than two seconds: displaying of the general information.
"ESC" button:
– Brief press: cancellation of the operation in progress or clearing of the last
superimposed display.
– Pressing for more than two seconds: clearing of all of the sup erimposed
displays and return to the permanent application.
"MENU" button:
– Brief press: acces to the general menu.
– Pressing for more than two seconds: acces to the help menu.
"MUSIC" button
– Brief press: displaying of the contextrelated menu of the act ive audio source
(tuner, CD, ...).
"TEL" button
– Brief press: opening of the line, in the case of an incomi ng call, or displaying
of the telephone source contextrelated menu.
"NAV" button:
– Brief press: displaying of the contextrelated menu of the navigation/guidance function.
"MAIN" button:
– Brief press: displaying of the general information.
18-11-2002

YOUR 807 IN DETAIL53
Stalk movement
Function
1 Press (behind) Increase volume
2 Press (behind) Decrease volume
1+2 Press together Switch off sound (mute); restore sound by pressing any button
3 Press Automatic search of upper frequencies (radio) Selection of next track (CD/CD changer)
Continuous pressure until release: fast forwards (CD/CD changer)
4 Press Automatic search of lower frequencies (radio) Selection of previ ous track (CD/CD changer)
Continuous pressure until release: rewind (CD/CD changer)
5 Press end Change source (radio/CD/CD changer) Confirmation of se lection (on a menu or screen)
Call connect/Call disconnect (Tel./incoming call Call disconn ect (Tel./Engaged)
Press for more than 2 seconds: display contextual menu (Tel./Not en gaged)
6 Rotation (clockwise) Selection of higher station stored in memory or storing in memory in position 1 for station not in
memory (radio) Selection of following CD Selection of followi ng item (on a menu or screen)
7 Rotation Selection of lower station stored in memory or storing in memory in position 6 for station not in
(anticlockwise) memory (radio) Selection of previous CD Selection of p revious item (on a menu or screen)
AUDIO/TELEPHONE RT3
18-11-2002

YOUR 807 IN DETAIL
54
Stalk movement
Function
A
Ejection of CD.
B SOURCE Selection of source: radio, CD or CD changer.
Press for more than 2 seconds: mute / cancel mute for current audio so urce being used
C Press: telephone on/off. Rotation: Adjusting the volume Audio adjustment: bass, trebl e, loudness, fader (FR/RR balance),
balance (L/R balance), automatic volume.
D Call connect (Tel/Incoming call) –
Display contextual menu (Tel/Not engaged).
E Access "PEUGEOT" services menu.
Press for more than 2 seconds: call "PEUGEOT" breakdown direct.
F MODE Change display.
Press for more than 2 seconds: display general information.
G Press: display contextual menu of display Confirm inputting or a djustment Cancel.
Rotation: move within a menu Select function / parameter Ad just.
H Adjust higher frequency, step by step or continuous (long press).
Select previous CD (CD changer).
I Adjust lower frequency, step by step or continuous (long press).
Select following CD (CD changer).
J ESC Cancel current operation.
Press for more than 2 seconds: clear all superimposed displays and retu rn to permanent application.
K Infrared window*.
L SIM card cover.
M kkAutomatic search of higher frequency Selection of following CD track.
Double press : change from LO mode to DX mode.
Press for more than 2 seconds: CD fast forward.
18-11-2002

YOUR 807 IN DETAIL55
Stalk movement
Function
N jjAutomatic search of lower frequency Selection of previous CD track.
Double press : change from LO mode to DX mode.
Press for more than 2 seconds: CD rewind.
O DARK 1st press: display top band (remainder of screen is black) 2nd press: brightness removed
(black screen) 3rd press: return to normal screen.
Press for more than 5 seconds: reinitialisation of the system.
P MENU Display general menu Press for more than 2 seconds: display help scre en.
Q Disconnect.
R BAND Select FM1, FM2, FMast, AM wavebands.
AST Press for more than 2 seconds: automatic storing of stations (autosto re).
S TA/PTY Traffic information priority on/off.
Press for more than 2 seconds: PTY function on/off.
T RDS RDS function on/off.
Press for more than 2 seconds: regional following mode on/off
U AUDIO Display window for adjusting loudness, sound distribution an d automatic
volume correction.
V SOS Press between 2 and 8 seconds: emergency call.
1 to 6 1 2 3 4 5 6 Select station in memory Select of CD in the CD changer.
Press more than 2 seconds: store station in memory while listening.
0 to 9 * #0 1 2 3 4 5Alphanumeric keypad for entering text and telephone numbers.
6 7 8 9 * #
* During the year.
18-11-2002

YOUR 807 IN DETAIL
56
GENERAL FUNCTIONS On/off
With the ignition switch in the accessories position or with the ignition on, press button C to switch the audio
function of the RT3 audio/telephone on or off.
Note: in the absence of an ignition key, press button C to switch the telematics system on or off.
The RT3 telephone can operate for 30 minutes without switc hing the vehicle ignition on.
Notes:
– the SIM card must be removed only after the audio/telephone h as been switched off,
– following automatic switching off of the audio/telepho ne after 30 minutes, it is possible to make a telephone call by pressing
button D,
– after the ignition has been switched off, the audio/te lephone can be switched on again by pressing buttons D, E, V or by
inserting a CD in the player.
Antitheft system
The RT3 audio/telephone is coded in such a way that it ca n operate only on your vehicle. If fitting it to another vehicle,
consult your PEUGEOT dealer for configuration of the system.
The system is automatic and requires no action on your part.
ADJUSTING THE VOLUME
Turn button Cclockwise to increase the volume of the audio/telephone or an ticlockwise to decrease it.
Note: the volume setting is specific to each source. It is possible to have different settings for radio, CD or CD changer.
AUDIO SETTINGS Press buttonUto access Bass,Treble ,Loudness ,Fader (front/rear balance), Balance(left/. right balance)
and Automatic volume adjustment settings.
Exit from audio mode is automatic after a few seconds without a ny action, or by pressing button J.
Note: bass and treble settings are specific to each source. It is possibl e to have different settings for radio,
CD or CD changer.
18-11-2002

YOUR 807 IN DETAIL
58
RADIO
Notes on radio reception
Car radio/telephone receivers are subject to phenomena which do not affect domestic radio sets. Both MW/LW and FM are
subject to various forms of interference. This is not a reflection on the quality of the equipment, but is due to the nature of
the signals and the way in which they are transmitted.
On MW/LW interference may be noticed when passing under high voltage power lines or bridges, or in tunnels.
On FM, interference may be the result of increasing distance from the transmitter, deflection of the signals by obstacles
(mountains, hills, buildings etc.) or of being in an area wh ich is not covered by a transmitter.
Selecting radio mode Press "SOURCE" several times.
Selecting a waveband Briefly press the "BND/AST"button to select the FM1, FM2, FMast and AM wavebands.
Automatic station search Briefly press button M or Nto search for the station immediately above or below.
The search stops at the first station found.
If the TAtraffic information programme is selected, only stations broadcastin g this type of programme
are selected.
Searching for a station occurs first in "LO"(selection of the most powerful transmitters) during scanning of t he waveband,
then in "DX"sensitivity (selection of the weaker and more distant transmitters).
To make a direct search in "DX"sensitivity, briefly press button Mor N twice.
18-11-2002

YOUR 807 IN DETAIL59
Manual station search Briefly press button Hor Ito increase or decrease the frequency displayed.
By continuing to press the button in the direction selected, you will obtain continuous scrolling of the frequency.
Scrolling stops at the first station found as soon as the butt on is released.
Manual station search
Select the station required.
Press one of the buttons "1"to "6" for more than two seconds.
An audible signal is emitted, confirming that the station h as been stored in the memory.
Automatic storing of FM stations in the memory
Press the''BNDAST'' button for more than two seconds.
Your audio/telephone automatically stores the 6 stations wit h the strongest signal in FM. These stations are stored in the
FMast waveband.
If it is not possible to find 6 stations, the remaining memo ries are empty.
Recalling stations stored in the memory
For each waveband, briefly press the buttons "1"to "6" to recall the corresponding stored station.
18-11-2002