display PEUGEOT 807 2008.5 Service Manual
Page 135 of 252
0 3
6
4
5
1
2
3
135
N A V I G A T I O N S E T T I N G S
Select the NAVI VOLUME function and turn the dial to set the volume o f e a c h v o i c e s y n t h e s i s e r ( t r a f fi c i n f o r m a t i o n , a l e r t m e s s a g e s … ) .
Select HAZARDOUS LOCATION POIs to gain access to the DISPLAY ON MAP, VISUAL ALERT and SOUND ALERT functions.
Select the POI CATEGORIES ON MAP function to select the POIs to be displayed on the map by default.
N A V I V O L U M E
Press the NAV button.
N A V I G A T I O N M E N U
Press the NAV button again or select the NAVIGATION MENU function and p r e s s t h e d i a l t o c o n fi r m .
SETTINGS
Select the SETTINGS function and p r e s s t h e d i a l t o c o n fi r m .
H A Z A R D O U S L O C A T I O N P O I s
POI CATEGORIES ON MAP
N A V I G A T I O N - G U I D A N C E
Contact a PEUGEOT dealer for details of the procedure for obtaining the HAZARDOUS LOCATION POIs.
Page 137 of 252
11
2
3
0 5
SELECTING A STATION
When the current radio station is displayed on the screen, press the dial.
The radio source short-cuts menu appears and providesovides access to the following short-cuts:
Select the function required and press t h e d i a l t o c o n fi r m t o g a i n a c c e s s t o the corresponding settings.
TA
The RDS, if displayed, allows you to continue listening tning to the same station by means of the frequency following. Howeve r, inever, in certain conditions, this RDS station cannot be followed throughroughout the entire country as radio stations do not cover 100 % of the terrie territory. This explains the loss of reception of the station during a jour a journey.
T h e e x t e r n a l e n v i r o n m e n t ( h i l l , b u i l d i n g , t u n n e l , u n d e r g r o u n d c a r p a r k . . . ) m a y i n t e r f e r e w i t h t h e reception, including in RDS following mode. This ph enomenon is a normal result of the way in which radio waves are transmitted and does not in any way indicate a failure of the audio equipment.
R D S - R E G I O N A L M O D E - T R A F F I C I N F O
Press the RADIO button to display the list of stations received locally sorted in alphabetical order. Select the station required by turning t h e d i a l a n d p r e s s t o c o n fi r m .
W A V E B A N D
R E G I O N A L P R O G . ( R E G ) RADIOTEXT
RDS
While listening to the radio, press one of the buttons to select the previous or next station on the list.
Press one of the buttons on the numeric keypad for
moor more than2 seconds to store the current station. Press the button on the numeric keypad to recall the stothe stored radio station.
RADIO
A long press of one of the buttons starts the automatic search for a station with a lower or higher frequency.
Page 139 of 252
1
2
3
5
4
6
139
S E L E C T I N G / P L A Y I N G M U S I C
C D , M P 3 / W M A C D , M P 3 / W M A S D C A R D
The playing and displaying of an MP3/WMA compilationilation may depend on the recording programme and/or the parameters us ers used. We recommend the ISO 9660 recording standard.
Press the MUSIC button.
Select the SELECT MUSIC function a n d p r e s s t h e d i a l t o c o n fi r m .
Press the up or down button to select the next/previous folder.
Select the music source required: CD, MP3/WMA CD, MP3/WMA SD C A R D … P r e s s t h e d i a l t o c o n fi r m . Play begins.
SELECT MUSIC
Press the MUSIC button again or select the MUSIC MENU function and p r e s s t h e d i a l t o c o n fi r m .
Press one of the buttons to select a music track. Press and hold one of the buttons for fast forward or backward play. MUSIC MENU
T h e l i s t o f t r a c k s o r M P 3 / W M A fi l e s a p p e a r s u n d e r M U S I C M E N U . T h e l i s t o f t r a c k s o r M P 3 / W M A fi l e s a p p e a r s u n d e r M U S I C M E N U .
Page 140 of 252
140
1
2
3
4
1
4
0 6
2
3
5
C o n n e c t t h e p o r t a b l e e q u i p m e n t ( M P 3 / W M A p l a y e r … ) t o t h e a u d i o C o n n e c t t h e p o r t a b l e e q u i p m e n t ( M P 3 / W M A p l a y e r … ) t o t h e a u d i o s o c k e t s ( w h i t e a n d r e d , R C A t y p e ) i n t h e g l o v e b o x u s i n g a s o c k e t s ( w h i t e a n d r e d , R C A t y p e ) i n t h e g l o v e b o x u s i n g a JACK/RCA audio cable.
Press the MUSIC button then press it again or select the MUSIC MENU f u n c t i o n a n d p r e s s t h e d i a l t o c o n fi r m .
Select the AUX music source and p r e s s t h e d i a l t o c o n fi r m . P l a y b e g i n s automatically.
Select the EXTERNAL DEVICE function and press the dial to activate it.
E X T E R N A L D E V I C E
Insert one or more CDs in the changer. Press the MUSIC button.
Press one of the buttons on the numeric keypad to select the corresponding CD.
Select the CD CHANGER music s o u r c e a n d p r e s s t h e d i a l t o c o n fi r m .
The displaying and management of the controls are opere operated via the portable equipment.
CD CHANGER
Select the SELECT MUSIC function a n d p r e s s t h e d i a l t o c o n fi r m .
SELECT MUSIC
MUSIC MENU
U S I N G T H E E X T E R N A L D E V I C E ( A U X )
AUDIO/RCA CABLE NOT SUPPLIED
CD CHANGER
P L A Y I N G A C D ( N O T M P 3 / W M A C O M P A T I B L E )
Press the MUSIC button again or select the MUSIC MENU function and p r e s s t h e d i a l t o c o n fi r m .
M U S I C M E D I A P L A Y E R S
Page 141 of 252
0 7
1
3
5
4
2
1
2
141
The services offered by the telephone depend on the network, the SIM card and the compatibility of the Bluetooth equipment used. Refer to your telepho ne’s manual and your operator to check which services you have access to. A list of mobile telephones which offer the best range of services is available from dealers.
BLUETOOTH TELEPHONE
CONNECTING A TELEPHONE
For safety reasons and because they require prolon gedonged attention on the part of the driver, the operations for pairing the Blue Bluetooth mobile telephone to the hands-free system of the WIP Nav m usv must be carried out with the vehicle stationary and the ignition on.
Activate the telephone’s Bluetooth function. The last telephone connected is reconnected automatically.
Select the TELEPHONE MENU f u n c t i o n a n d p r e s s t h e d i a l t o c o n fi r m .
TELEPHONE MENU
Enter the authentication code on the telephone. The code to be entered is displayed on the screen.
To change the telephone connected, press the PHONE button, then select TELEPHONE MENU and press the d i a l t o c o n fi r m .
Once the telephone has been connected, the WIP Nav Nav can synchronise the address book and the call list. This syncis synchronisation may take a few minutes.
Select CONNECT PHONE. Select the t e l e p h o n e a n d p r e s s t o c o n fi r m . T h e l i s t o f t e l e p h o n e s c o n n e c t e d p r e v i o u s l y ( 4 m a x i m u m ) a p p e a r s T h e l i s t o f t e l e p h o n e s c o n n e c t e d p r e v i o u s l y ( 4 m a x i m u m ) a p p e a r s on the multifunction display. Select the telephone requir required for a new connection.
Press the PHONE button.
F o r a fi r s t c o n n e c t i o n , s e l e c t SEARCH PHONE and press the dial t o c o n fi r m . T h e n s e l e c t t h e n a m e o f the telephone.
SEARCH PHONE
CONNECT PHONE
Page 142 of 252
142
2
3
11
2
3
Press the end of the steering wheel control to accept the call or end the call in progress.
Select the YES tab to accept or NO t o r e f u s e a n d c o n fi r m b y p r e s s i n g t h e dial.
R E C E I V I N G A C A L L MAKING A CALL
An incoming call is announced by a ring and a superimpperimposed display on the multifunction display.
Y E S
To hang up, press the PHONE button or press the dial and select END CALL t h e n c o n fi r m b y p r e s s i n g t h e d i a l .
END CALL
Press the PHONE button.
Press the end of the steering wheel control for more thare than two seconds to gain access to the address book.
It is also possible to select a number from the address bress book. You can select DIAL FROM ADDRESS BOOK. The WIP NAIP NAV permits the recording of up to 4 000 entries.
Select DIAL NUMBER, then dial the telephone number using the virtual keypad.
Select the TELEPHONE MENU f u n c t i o n a n d p r e s s t h e d i a l t o c o n fi r m . NO
DIAL NUMBER
TELEPHONE MENU
The list of the last 20 calls made and received ap pears uears under TELEPHONE MENU. You can select a number and pred press the dial to make the call.
Page 143 of 252
0 8
5
6
1
2
3
4
143 CONFIGURATION
SETTING THE DATE AND TIME
This function provides access to the options: SYSTEM LANGUAGE, DATE AND TIME, DISPLAY ( B R I G H T N E S S , C O L O U R , M A P C O L O U R ) , V E H I C L E P A R A M E T E R S , U N I T S , S Y S T E M PARAMETERS.
Set the parameters one by one using t h e d i r e c t i o n a r r o w s a n d c o n fi r m b y means of the dial.
Select the DATE FORMAT function a n d p r e s s t h e d i a l t o c o n fi r m . C o n fi r m t h e f o r m a t r e q u i r e d u s i n g the dial.
Select the SET DATE AND TIME f u n c t i o n a n d p r e s s t h e d i a l t o c o n fi r m .
Pressing the SET UP button for more than 2 secondspermits access to:
Press the SET UP button.
Select the TIME FORMAT function a n d p r e s s t h e d i a l t o c o n fi r m . C o n fi r m t h e f o r m a t r e q u i r e d u s i n g the dial.
SET DATE AND TIME
Select the DATE AND TIME function a n d p r e s s t h e d i a l t o c o n fi r m .
DATE AND TIME
CEMO MODE
G P S C O V E R A G E
DESCRIPTION OF THE UNIT
Page 144 of 252
144
0 9
1
TRIP COMPUTER
V E H I C L E D I A G N O S T I C S
Press the MAIN button or press the MODE button several times in succession until the trip computer is displayed. - The " v e h i c l e " tab: The range, the current consumption and the distance remaining. - The "1" ( r o u t e 1 ) t a b w i t h : The average speed, the average consumption and the distance travelled calculated over route "1". - The " 2 " ( r o u t e 2 ) t a b w i t h t h e s a m e functions for a second route.
R a n g e : Displays the distance which can travelled with t with the remaining fuel detected in the tank, in relation to the average cons consumption over t h e l a s t f e w m i l e s ( k i l o m e t r e s ) . T h i s d i s p l a y e d v a l u e m a y v a r y s i g n i fi c a n t l y f o l l o w i n g a c h a n g e i n t h e T h i s d i s p l a y e d v a l u e m a y v a r y s i g n i fi c a n t l y f o l l o w i n g a c h a n g e i n t h e vehicle speed or the relief of the route. W h e n t h e r a n g e f a l l s b e l o w 2 0 m i l e s ( 3 0 k m ) , d a s h e s a r e d i s p l a y e d . W h e n t h e r a n g e f a l l s b e l o w 2 0 m i l e s ( 3 0 k m ) , d a s h e s a r e d i s p l a y e d . A f t e r fi l l i n g w i t h a t l e a s t 5 l i t r e s o f f u e l , t h e r a n g e i s r e c a l c u l a t e d a n d A f t e r fi l l i n g w i t h a t l e a s t 5 l i t r e s o f f u e l , t h e r a n g e i s r e c a l c u l a t e d a n d i s d i s p l a y e d w h e n i t e x c e e d s 6 0 m i l e s ( 1 0 0 k m ) . If, whilst driving, dashes are displayed continuou sly in ply in place of the digits, contact a PEUGEOT dealer.
C u r r e n t c o n s u m p t i o n : only calculated and displayed aayed above 20 mph ( 3 0 k m / h ) .
A v e r a g e c o n s u m p t i o n : this is the average quantity of tity of fuel consumed since the last trip computer zero reset.
D i s t a n c e t r a v e l l e d : calculated since the last trip compucomputer zero reset.
D i s t a n c e r e m a i n i n g t o t h e d e s t i n a t i o n : calculated wited with reference t o t h e fi n a l d e s t i n a t i o n , e n t e r e d b y t h e u s e r . I f g u i d a n c e i s a c t i v a t e d , t o t h e fi n a l d e s t i n a t i o n , e n t e r e d b y t h e u s e r . I f g u i d a n c e i s a c t i v a t e d , the navigation system calculates it as a current va lue.
A v e r a g e s p e e d : this is the average speed calculated sated since the last t r i p c o m p u t e r z e r o r e s e t ( i g n i t i o n o n ) .
Each press of the button at the end of the wipers stalk dstalk displays the various trip computer data in succession, according to tg to the display.
A FEW DEFINITIONS
Page 151 of 252
150
01 FIRST STEPS
CD eject
On - Off Volume dial
M o d e : Selection of the screen display mode. D a r k : Hide the screen display, until completely black, by successive presses. Pressing again reactivates the display.
S o u r c e : Selection of the source; radio, CD and CD changer. B a n d : Selection of the FM1, FM2, FMast and AM wavebands. : Setting the audio options: Front/rear balance, left/right balance, loudness, sound ambiences. L i s t : Displaying of the local stations, of the tracks on the CD or of the MP3 directories. - Storing of a station. - Selection of a stored radio station. - Selection of a CD in the CD changer. updating of the stations received.
E S C : Abandon current operation. M e n u : Displaying of the general menu.
Navigator which selects the choices above or the step by step or rapid advances. Pressing the navigation dial c o n fi r m s t h e c h o i c e , b u t d o e s n o t store it.
A long press is required.
For a detailed global view of the menus a v a i l a b l e , r e f e r t o t h e " D i s p l a y fl o w c h a r t " section of this chapter.
Page 152 of 252
7
0 2
151
D I S P L A Y A N D M E N U C
AUDIO FUNCTION: radio, CD, options.
PERSONALISATION-CONFIGURATION: vehicle parameters, display, languages.
TELEPHONE:hands-free kit, matching, management of a call.
> GENERAL MENU > D I S P L A Y C
This displays the following information, via the audio equipment control pad: - the time, - the date, - t h e e x t e r i o r t e m p e r a t u r e ( t h i s fl a s h e s i f t h e r e i s a r i s k o f i c e ) , - t h e a u d i o s o u r c e d i s p l a y s ( r a d i o , C D , . . . ) , - t h e a c c e s s e s c h e c k ( d o o r s , b o o t , . . . ) , - t h e w a r n i n g m e s s a g e s ( e . g . : " A n t i p o l l u t i o n f a u l t " ) o r i n f o r m a t i o n m e s s a g e s ( e . g . : " A u t o l i g h t i n g a c t i v a t e d " ) d i s p l a y e d t e m p o r a r i l y , c a n b e cleared by pressing the "ESC" button, - the trip computer, - the location of a faulty wheel, - the detection of a rear obstacle. TRIP COMPUTER: distance entering, warnings, status of functions.