glove box Ram 1500 2011 Owner's Manual

▫Sunroof Maintenance ................. 161
▫ Ignition Off Operation ................. 161
 Electrical Power Outlets ................. 162
 Cigar Lighter And Ash Receiver —
If Equipped .......................... 166
 Power Inverter — If Equipped ............ 167
 Cupholders .......................... 169
▫ Front Instrument Panel Cupholders —
(40–20–40 Seats) ..................... 169
▫ Front Instrument Panel Cupholders — Floor
Mounted Shifter ..................... 170
▫ Rear Cupholder — Quad Cab .......... 170
▫ Rear Cupholder — Crew Cab ........... 171
 Storage ............................. 171 ▫
Glove Box Storage ................... 171
▫ Door Storage ....................... 173
▫ Center Storage Compartment —
If Equipped ........................ 174
▫ Second Row In-Floor Storage Bin — If
Equipped .......................... 176
▫ Seatback Storage ..................... 177
▫ Storage (Regular Cab) ................. 178
▫ Storage And Seats (Crew Cab) ........... 178
▫ Plastic Grocery Bag Retainers (Regular Cab
Models) ........................... 179
 Rear Window Features .................. 180
▫ Rear Window Defroster ................ 180
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91

Rear Cupholder — Crew Cab
Crew Cab vehicles are equipped with rear cupholders
located in the center armrest.
STORAGE
Glove Box Storage
The glove box is located on the passenger side of the
instrument panel and features both an upper and lower
storage area.
Crew Cab Rear Armrest Cupholder
Glove Box1 — Upper Glove Box
2 — Lower Glove Box
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171

To open the upper glove box push upward on the handle
release. The glove box door will automatically open.To open the lower glove box, pull on the handle to release
the latch and lower the door.
Upper Glove BoxLower Glove Box
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

2. Remove the connector bracket from the sill by press-
ing inward in the locking tab.
3. Disconnect the chassis wiring harness, ensuring the
connector bracket does not fall into the sill.4. Connect the chassis plug and bracket (provided in the
glove box) to the chassis wiring harness and insert the
bracket back into the sill.
5. Connect the tailgate plug (provided in the glove box)
to the tailgate wiring harness to ensure that the terminals
do not corrode.
6. Tape the tailgate harness and bracket against the
forward-facing surface of the tailgate. This will prevent
damaging the connector and bracket when storing or
reinstalling the tailgate.
Removing The Tailgate
1. Disconnect the wiring harness for the rear camera (if
equipped), refer to “Disconnecting the Rear Camera — If
Equipped” in this section.
2. Unlatch the tailgate and remove the support cables by
releasing the lock tang from the pivot.
Locking Tab
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199