RENAULT CLIO 2003 X65 / 2.G Owners Manual

2
QXBIUDB*T[G      3DJH 
nu654-6 - CLIO IIC:\Documentum\Checkout
u654-6_eng_T3.WIN 30/10/2002 12:12-page29
3.29
ELECTRIC SUNROOF(continued)
Sunroof screen
Slide it using handle2.
To keep the screen closed, the hook
must be secured into the sunroof
frame.
• Check that the sunroof is
correctly closed before leaving
the vehicle.
• Clean the seal every three months
using products provided by our
Technical Department.
• Do not open the sunroof
immediately after a rain shower or
after washing your vehicle.

2
3
14
QXBIUDB*T[G      3DJH 
nu654-6 - CLIO IIC:\Documentum\Checkout
u654-6_eng_T3.WIN 30/10/2002 12:12-page30
3.30
STORAGE COMPARTMENTS
Passenger side glove box1
To open, lift handle2. The box
contains a sunglasses holder, a pen
holder and space for credit cards.
Centre console storage
compartment3Driver's storage compartment4
No objects should be
placed on the floor (area
in front of driver) as such
objects may slide under
the pedal during braking
manoeuvres, thus obstructing its
use.

1
3
3
4
2
QXBIUDB*T[G      3DJH 
nu654-6 - CLIO IIC:\Documentum\Checkout
u654-6_eng_T3.WIN 30/10/2002 12:12-page31
3.31
STORAGE COMPARTMENTS(continued)
Door storage compartments1Rear compartments2Front seat document pouches3
Storage compartment under
passenger seat4

2
1
QXBIUDB*T[G      3DJH 
nu654-6 - CLIO IIC:\Documentum\Checkout
u654-6_eng_T3.WIN 30/10/2002 12:12-page32
3.32
ASHTRAYS - CIGAR LIGHTER
Ashtray
To open, lift cover1.
To empty the ashtray, pull the
assembly towards you and it will be
released from its housing.
Cigar lighter
Ignition on, press in the cigar
lighter2.
It will click out by itself as soon as it
is ready. Pull it out to use it. After
use, replace it without pushing it all
the way in.

1
A
3
4
3
42
B
QXBIUDB*T[G      3DJH 
nu654-6 - CLIO IIC:\Documentum\Checkout
u654-6_eng_T3.WIN 30/10/2002 12:12-page33
3.33
REAR BENCH SEAT(operation)
The seat base and the seatback may
be folded down (in one or two
sections) to allow bulky objects to
be carried
To fold down the seat base
Lift seat baseA, against the front
seats.
To fold down the seatback
Remove the rear head restraints (if
they are fitted to the vehicle). Press
button2and lower the seatbackB.
Removing the seat base
Lift the seat base to remove brackets3
from their housing4.
To refit the seat base,carry out the
operations in reverse order to
removal.Ensure the seat base is
correctly secured.
• When refitting the seatback, ensure it is correctly locked at the top. If seat covers are being used,
check that they are not preventing the seatback locking mechanism from operating correctly.
• When moving the bench seat, check that the seat belt housings1are correctly positioned before
folding down the seat base.
Once the bench seat is in place again, ensure the seat belts are correctly repositioned.

1
2
QXBIUDB*T[G      3DJH 
nu654-6 - CLIO IIC:\Documentum\Checkout
u654-6_eng_T3.WIN 30/10/2002 12:12-page34
3.34
LUGGAGE COMPARTMENT
To open
Press button1and lift the tailgate.
To close:
Lower the tailgate using handle2
inside the tailgate to help you.
When the tailgate has been lowered
to shoulder height, release handle2
and finish closing the tailgate by
pressing down on the tailgate from
the outside.

11
2
QXBIUDB*T[G      3DJH 
nu654-6 - CLIO IIC:\Documentum\Checkout
u654-6_eng_T3.WIN 30/10/2002 12:12-page35
3.35
LUGGAGE COMPARTMENT(continued)
Rear shelf
To remove, release the two return
cords1.
Do not place any objects,
in particular heavy or
hard objects, on the rear
parcel shelf. These may
pose a risk to the vehicle
occupants if the driver has to
brake suddenly or if the vehicle
is involved in an accident.Gently lift the shelf and pull it
towards you.
Refitting is the reverse of removal.
Built-in garment case2
This is located under the rear parcel
shelf and is closed by a zip fastener.
It can be used to store clothes.
The total weight of luggage
placed in the built-in
garment case must not
exceed 5 kg (11 lbs).

QXBIUDB*T[G      3DJH 
nu654-6 - CLIO IIC:\Documentum\Checkout
u654-6_eng_T3.WIN 30/10/2002 12:12-page36
3.36
LUGGAGE COVER
The luggage cover consists of three
solid sections.
It can be used in one of three ways:
• In the unfolded position.
Do not place any objects,
in particular heavy or
hard objects, on the
luggage compartment
cover. These may pose a risk to
the vehicle occupants if the
driver has to brake suddenly or if
the vehicle is involved in an
accident.• In the half-folded position. • Removed entirely.
To remove the luggage cover,
place it in the half-folded
position, take hold of the end and
pull it towards you.

QXBIUDB*T[G      3DJH 
nu654-6 - CLIO IIC:\Documentum\Checkout
u654-6_eng_T3.WIN 30/10/2002 12:12-page37
3.37
TRANSPORTING OBJECTS IN THE LUGGAGE COMPARTMENT
Always place objects carried in the
luggage compartment so that their
largest dimension is against:
- the back of the rear bench seat, for
normal loading.
- the folded down seat, for
maximum loading.
Always put the heaviest
items directly onto the
floor. When the vehicle is
fitted with them, use the
lashing points located on the floor
at the rear to secure transported
items. Luggage should be loaded in
such a way that no item will be
thrown forward and strike the
occupants if the driver has to brake
suddenly. Fasten the rear seat belts,
even if the seats are not occupied.

QXBIUDB*T[G      3DJH 
nu654-6 - CLIO IIC:\Documentum\Checkout
u654-6_eng_T3.WIN 30/10/2002 12:12-page38
3.38