dashboard RENAULT KANGOO 1997 KC / 1.G Chassis Workshop Manual
Page 67 of 105
STEERING ASSEMBLY
Steering column
36
Under the vehicle, cut the retaining clip for the
rubber gaiter and push it back towards the
bulkhead.
Remove the eccentric bolt from the universal
joint.
Remove the two bolts and the two nuts mounting
the steering column.
12964R2
12965-1R2
Release:
- the steering column after disconnecting the
ignition switch,
- the gaiter from the bulkhead ( 1 ) and remove
it with the steering column.
REFITTING
Refit the steering column.
Fit the gaiter on the bulkhead, having tied the
flaps and the universal joint together with string.
Refitting is then the reverse of removal.
Check the instrument panel connectors are
correctly reconnected.
13116S
Remove the mounting bolts for the dashboard on
the steering column.
36-15
Page 100 of 105
WIRING DIAGRAM KEY
104Ignition switch
118 ABS computer
150Rear right wheel sensor
151Rear left wheel sensor
152Front right wheel sensor
153Front left wheel sensor
160Stop switch
225Diagnostic socket
247Instrument panel
260Fuse box
777Power feed fuse board
R2Dashboard / rear left
R36ABS / Dashboard
R101Right hand side member / Right hand
headlight
ELECTRONICALLY CONTROLLED HYDRAULIC SYSTEMS
BOSCH ABS
38
38-5