width RENAULT KANGOO 1997 KC / 1.G Chassis Workshop Manual
Page 49 of 105
Offset
(in mm)
DI3501
WHEELS AND TYRES
Specifications
WHEEL RIMS
There are two forms of wheel identification marking:
- engraved markings for steel rims,
- cast marking for alloy rims.
The marking gives the main dimensional specifications of the wheel.
The marking may be complete:
Example : 5 1/2 J 14 4 CH 36
or simplified
Example : 5 1/2 J 14
35
The four wheel bolts are over a diameter of 100
mm (4 mounting bolts).
Maximum run-out: 1.2 mm measured on the rim
edge (at G).
Maximum eccentricity: 0.8 mm measured on the
pressure face of the tyre beads.
FE
Number
of holes
DCB
WIDTH
(in inches)
5 1/2
A
TYPE
OF WHEEL
5 1/2 J 14
4 CH 36J144CH36
RIM
PROFILE
NOMINAL DIAMETER
(in inches). under tyre
beadTyre bead
profile
35-1
Page 50 of 105
85920R2
WHEELS AND TYRES
Specifications
Examples of identification marking
165/70SR1383
125463
165/70 R 13 83 S
TYRES
35
1165
702
3S
R
513
4
Tyre width in mm ( l ) section
Ratio h/lheight
width
Speed index 180 km/h maximum
Radial structure
Inner diameter expressed in inches. Corresponds to the diameter of the rim.
836Load index
Some speed symbols :Maximum speed km/h
R 170
S 180
T 190
U 200
H 210
V 240
ZR over 240
Types of structure :
Diagonal No marking
Radial R
Bias belted B
35-2