air filter RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Owner's Manual

STARTING - CHARGING
Starter motor
16
REMOVAL
Place the vehicle on a two post lift.
Remove:
- the air filter inlet pipe,
- the battery,
- the computer support mounting bolts as well
as the connectors at (1), then move the
computer support/ diesel filter assembly to
one side.
13088R3
- the starter mounting bolts and the heat shield
(A),- the starter connections,
- the starter motor itself.
REFITTING
Refitting is the reverse of removal.
Check for the presence of the centring dowel,
which should be located at (B).
13087R1
F8Q Engine
16-11

INJECTION
General
17
1 Coil
2 Air filter
3 Oxygen sensor
4 Absolute pressure sensor
5 Throttle position potentiometer
6 Idle regulation stepping motor
7 Air temperature sensor
8 Injection computer
9 Inertia switch
10 Locking relay
11 Fuel pump relay
12 TDC sensor
13 Fuel vapour recycling solenoid valve
14 Coolant temperature sensor
15 Tool for removing spark plug leads
16 Pinking sensor
17 Power assisted steering pressostat
18 Pressure regulator
19 Anti-interference condenser
20 Fuel vapour absorber (canister)
LOCATION OF COMPONENTS
13081
D7F Engine
17-6

INJECTION
General
17
1 Fuel vapour recycling solenoid valve
2 Air filter
3 Pinking sensor
4 Absolute pressure sensor
5 Idle speed regulation stepping motor
6 Throttle position potentiometer
7 Air temperature sensor
8 Injection computer
9 Inertia switch
10 Fuel pump relay
11 TDC sensor
12 Coolant temperature sensor
13 Oxygen sensor
14 Coil for cylinders 2 - 3
15 Power assisted steering pressostat
16 Coil for cylinders 1 - 4
17 Fuel vapour absorber (canister)
18 Anti-interference condenser
LOCATION OF COMPONENTS
13082
E7J Engine
17-7