RENAULT KANGOO 1997 KC / 1.G Trim And Upholstery Workshop Manual

77 11 194 298JULY 1997Edition Anglaise
The repair methods given by the manufacturer in this document are based on the
technical specifications current when it was prepared.
The methods may be modified as a result of changes by the manufacturer in the
production of the various component units and accessories from which his vehicles
are constructed".All copyrights reserved by Renault.
Copying or translating, in part or in full, of this document or use of the service part
reference numbering system is forbidden without the prior written authority of
RENAULT.
CRenault 1997
Trim and upholstery
SIDE OPENING ELEMENTS
NON-SIDE OPENING ELEMENTS
REAR PARCEL SHELVES
FRONT SEAT FRAMES AND RUNNERS
REAR SEAT FRAMES AND RUNNERS
FRONT SEAT TRIM
REAR SEAT TRIM
SEAT ACCESSORIES
INTERIOR BODY LININGS
FC0A - FC0C - FC0D - FC0E - KC0A - KC0C - KC0D - KC0E

EXPLODED VIEW
PRB7000

72-1
72-2
Contents
Pages
Trim and
upholstery
Door sill lining
B-pillar lining
Side trim panels
Upper central trim assembly
Head lining
Carpet71-1
71-1
71-2
71-3
71-5
71-7
Front door trim
Side door trim
Pages
Rear side shelves74-1
75-1Complete front seat and runners
76-1Complete rear bench
Seatback trim
Folding seatback trim
Seat squab trim77-1
77-3
77-4
1/3 - 2/3 seatback trim
1/3 - 2/3 seat squab trim78-1
78-4
Locking cable - 3rd seat belt
retractor
79-1
INTERIOR BODY LININGS
REAR PARCEL SHELF
FRONT SEAT TRIM
REAR SEAT TRIM
SEAT ACCESSORIES
FRONT SEAT FRAMES AND
RUNNERS
REAR SEAT FRAMES AND
RUNNERS
73-1Lining for rear door or tailgate
NON-SIDE OPENING ELEMENTS
TRIM
SIDE OPENING ELEMENTS TRIM
71
72
73
74
75
76
77
78
79

INTERIOR BODY LININGS
Door sill lining
REMOVING
Unclip the lining.
71
PRB7101
B-pillar lining
REMOVING
Unclip the lining.
PRB7102
71-1

INTERIOR BODY LININGS
Side trim panels
Remove the parcel shelves (depending on
version).
Unclip the trim panel.
71
REMOVING
13100S
PRB7103
71-2

INTERIOR BODY LININGS
Upper central trim assembly
Remove the mountings.
Disconnect the wiring harness.
Unclip the trim assembly.
71
REMOVING
PRB7104
13073S
Unclip the outer section.
13072R1
71-3

INTERIOR BODY LININGS
Upper central trim assembly
- the mounting bolts (A) for the upper storage
compartment,
- the partition mounting studs (B).
71
Depending on the version, the following parts
will need to be removed:
- the modular partition and/or the upper storage
compartment in the cab,
13248R
- the upper nuts and the lower bolts,
13249R
71-4

INTERIOR BODY LININGS
Head lining
71
PRB7105
REMOVING
PRB7106
Remove the upper storage compartment and/or
the pivoting modular partition, depending on the
version.
PRB7104
Remove the central trim assembly.
Carefully release the head lining (affixed with
adhesive).
Use a tool (such as a mastic knife) to cut through
the beads of adhesive.
71-5

INTERIOR BODY LININGS
Head lining
71
REFITTING
13250S
First protect the seats and then apply adhesive to the section(s) of
head lining as shown below:
- 6 beads, 4 mm dia.
- 2 beads, 4 mm dia.
At least two persons are required to carry out this operation.
NOTE: For bonding the headlining use a single-pot PU adhesive
(windscreen adhesive type).
71-6

INTERIOR BODY LININGS
Carpet
71
Remove the centre console to fit the carpet at the front and take out the seats to fit it at the back.
Unclip the retaining pins.
PRB7107
71-7