RENAULT PULSE 2012 1.G Owners Manual


> (GLW    0RGHO .$2(0B5HQDXOW @
16. Radio memory buttons (1 - 6\f
17. ME\bU button
Audio main operation
The audio system operates when the ignition switch is
in the “ACC” or “O\b” position.
POWER button:
To turn on the audio system, push the Power button.
.The system will turn on in the mode, (radio or CD\f
which was used immediately before the system
was turned off.
. If there is no CD loaded, the radio will be turned
on.
To turn off the audio system, push the Power button.
Volume control:
To control the volume, turn the VOL control knob.
Turn the knob clockwise to make the sound louder.
Turn the knob counterclockwise to make the sound
quieter.
Sound preference button:
To enter the audio mode (radio, CD or AUX\f , push the
button. When no CD is loaded and AUX is not
connected , the audio system will automatically switch
to the radio mode.
To change the audio settings (BASS, TREBLE,
FADER, BALA\bCE\f , push the
button to select
the mode.
BASS ?TREBLE ?BALA\bCE ?FADER ?BASS
To adjust each audio setting, push the SEEK/TRACK
button or Tune button. BASS: (í\f to decrease / (+\f to increase
TREB(LE\f: (í\f to decrease / (+\f to increase
BAL
(A\bCE\f:
(R\f to right balance / (L\f to left balance
FADE(R\f: (F\f to front fade / (R\f to rear fade
If the audio settings mode is unchanged for approxi-
mately 8 seconds, the audio settings mode will
automatically return to the normal mode.
MENU button:
To change the audio settings (BEEP and CLOCK\f ,
push the
button to select the mode while the CD
or radio is on.
Push the
button until the desired mode appears
on the display.
BEEP O\b ?CLOCK
To turn the beep sound off or on, push the SEEK/
TRACK button
oror TU\bE/FF·REW/
FOLDER buttonoruntil the desired mode
is displayed. This turns on or off the beep sound when
audio buttons are pushed.
Clock display:
To display the clock on the screen, perform the
following operations.
1. Push the
button repeatedly until CLOCK O\b
or OFF appears on the display while the audio
system is on.
2. Push the SEEK/TRACK button
oror
TU\bE/FF·REW/FOLDER buttonorto
select CLOCK O\b. Clock adjustment:
To adjust the clock, turn the clock display on and
perform the following operations.
1. Push the
button while CLOCK O\b is on the
display. The hour and minute digits blink.
2. To adjust the hours, push the SEEK/TRACK button
or.
3. To adjust the minutes, push the TU\bE button
or.
If no user input is detected for 10 seconds, or when
the “ME\bU” button is pushed, the clock setting mode
will automatically return to the normal mode.
CD player operation
JVH0002X
The audio system operates when the ignition switch is
in the “ACC” or “O\b” position.
Loading:
Insert a CD into the slot with the label side facing up.
The CD will be guided automatically into the slot and
will start playing. To stop playing, push the Power
button.
Heater and air conditioner, and audio system4-21
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-22Heater and air conditioner, and audio system
CAUTION:
Do not force the compact disc into the slot. This
could damage the player.
button:
When the
button is pushed while a C\f is loaded,
the C\f will start playin\b automatically.
SEEK/TRACK button:
When the
button is pushed while a C\f is bein\b
played, the present track will be advanced and move to
the next track. Push the
button several times to
skip forward tracks. The C\f will advance the number
of times the button is pushed. When the last track of
the C\f is forwarded, the first track will be played.
When the
button is pushed while a C\f is bein\b
played, the present track will start over from the
be\binnin\b of the current track. Push the
button
several times to skip back tracks. The C\f will rewind
the number of times the button is pushed. When the
first track of the C\f is rewound, the last track will be
played.
TUNE/FF·REW/FOLDER button:
When the
orbutton is pushed and held while
a C\f is bein\b played, the C\f will be played while
forwardin\b or rewindin\b. When the button is released,
the C\f will return to the normal play speed.
button:
When the
button is pushed while a C\f is bein\b
played, the first 10 seconds of all the tracks will be
played.
When the
button is pushed a\bain, the C\f will
return to normal play from the track which is playin\b.
(Repeat) button:
To chan\be the play settin\bs, push the
button to
select the mode.
C\f:
RPT \fISC ?RPT TRACK
All the tracks of the C\f will be played continuously in
sequential order. The display indicates no symbol
mark. While the
button is pushed, the display
indicates “RPT \fISC”.
RPT TRACK:
The selected track of the C\f will be played con-
tinuously. While the
button is pushed, the display
indicates “RPT TRACK”.
(Random) button:
To chan\be the play sequence, push the
button to
select the mode.
C\f:
R\fM \fISC ?RPT \fISC
All the tracks of the C\f will be played continuously in
sequential order. The display indicates no symbol
mark. While the
button is pushed, the display
indicates “RPT \fISC”.
R\fM \fISC:
All the tracks of the C\f will be played continuously in random order. While the
button is pushed, the
display indicates “R\fM \fISC”.
MUTE button:
Press the
button to pause the track.
CD EJECT button:
To eject a C\f, push the C\f EJECT
button.
If a C\f is ejected by pushin\b the
button, and it is
not taken out from the loadin\b slot, the C\f will
automatically be reloaded to the slot to protect the C\f
(12 cm discs only) .
AUX button:
The AUX IN jack is located on the audio unit. The AUX
IN audio input jack accepts any standard analo\b audio
input such as from a portable cassette tape, C\f player,
MP3 player or laptop computers.
Push the AUX button to play a compatible device when
it is plu\b\bed into the AUX IN jack.
WARNING:
. Do not allow the cable or an external device
connected to the AUX terminal to affect your
driving.
. Connect a stereo mini-plug (3.5 mm in
diameter) cable to the AUX IN jack. If a
monaural mini-plug cable is used, the audio
will not output correctly.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
WARNING:
.Depending on the external device, please
note that the volume may be louder or
quieter than that of the external device.
. When the AUX contacts with the plug of the
connector cable, noise may be heard.
. The connected exterior device cannot be
operated with the main audio system. The
volume and sound quality can be adjusted.
. The song title in the external device cannot
be displayed on the audio display.
. For the power source of the external device,
use the special battery. The external device
cannot be charged with the AUX terminal.
Noise may be heard if the CD, radio etc. is
operated while charging the battery with the
power socket of the vehicle.
FM-AM radio operation
JVH0002X
\fhe audio s\bstem operates when the ignition switch is
in the “ACC” or “ON” position.
/button:
When the
/button is pushed while the audio
s\bstem is off, the audio s\bstem will turn on and the
radio will turn on.
When the
/button is pushed while another
audio source is pla\bing, the another audio source will
turn off and the radio will turn on.
\fo change the radio bands, push the
/button
until the desired band (FM1, FM2, or AM) is displa\bed.
\fhe FM stereo indicator, “S\f” will displa\b during FM
stereo reception. When the stereo broadcast signal is
weak, the radio will automaticall\b change from stereo
to monaural reception.
TUNE/FF·REW/FOLDER button:
When adjusting the broadcasting station frequenc\b
manuall\b, push the
orbutton until the desired
frequenc\b is achieved.
When adjusting the broadcasting station frequenc\b
automaticall\b, push the
orbutton. When the
s\bstem detects a broadcasting station, it will stop at
the station.
SEEK UP/DOWN button:
When adjusting the broadcasting station frequenc\b
automaticall\b, push the
button. When the
s\bstem detects a broadcasting station, it will stop at
the station.
button:
When the
button is pushed, the s\bstem will seek
and stop at the detected broadcasting station for 5
seconds, and then it will start to seek for the next
broadcasting station.
Push the
button in this 5-second period to stop
seeking.
Radio memory button:
\fhe audio s\bstem can store up to 12 FM station
frequencies (for FM1 and FM2) and 6 AM station
frequencies.
\fo store the station frequenc\b:
1. \fune to the desired broadcasting station fre- quenc\b b\b using the
orbutton.
2. Push and hold a memor\b button (1 - 6) until a beep sounds.
3. \fhe switch number and frequenc\b will appear on the displa\b when the memor\b is stored properl\b.
4. Perform steps 1 - 3 for all other memor\b buttons.
Push a memor\b button (1 - 6) to select a desired
memor\b.
If the batter\b cable is disconnected, or if the audio fuse
blows, the radio memor\b will be erased. In such a case,
reset the desired stations.
(Automatic Preset) button:
\fhe audio s\bstem can store up to 6 FM station
frequencies and 6 AM station frequencies.
\fo store the station frequenc\b automaticall\b, push and
hold the
button until a beep sounds. \fhe station
will be automaticall\b stored in the “AU\fO.P” memor\b.
\fhe displa\b indicates “AP-**”.
Heater and air conditioner, and audio system4-23
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-24Heater and air conditioner, and audio system
Push thebutton to select a desired memor\f.
MUTE button:
Press the
button to mute the sound. Press again
to restore the sound.
F\b-A\b RADIO WITH CO\bPACT DISC (CD) PLAYER (T\fpe C)
JVH0003X
1. Sound preference button
2. TA (Traffic Announcement)/NEWS button
3. F\b·A\b band select button
4. CD button
5. AUX button
6. CD EJECT button
7. \bENU button
8. SEEK/TRACK button 9. TUNE button
10. ENTER button
11. PHONE END/BACK button
12. POWER ON/OFF button/VOLU\bE control
knob
13. AUX IN (auxiliar\f input) jack
14. PHONE SEND button
15. PHONE BOOK button
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
16. Radio memory buttons
17. RP\f (Repeat)\bMIX (Mix play) button
Anti-theft system (if equipped)
\fhis unit can only be activated when the ignition switch
for Anti-\fheft System is in the “ACC” or “ON” position.
Each radio is uniquely matched to the vehicle’s
immobilizer and therefore cannot be transferred to
any other vehicle.
Audio main operation
\fhe audio system operates when the ignition switch is
in the “ACC” or “ON” position.
POWER ON/OFF button:
\fo turn on the audio system, push the POWER ON\b
OFF button.
.\fhe system will turn on in the mode, (radio or CD)
which was used immediately before the system
was turned off.
. If there is no CD loaded, the radio will be turned
on.
\fo turn off the audio system, push the POWER ON\b
OFF button.
Volume control:
\fo control the volume, turn the VOLUME control dial.
\furn the VOLUME control dial clockwise to make the
sound louder.
\furn the VOLUME control dial counterclockwise to
make the sound quieter.
Sound preference button:
\fo enter the audio mode (radio or CD) , push the
button. When no CD is loaded, the audio system will
automatically switch to the radio mode. \fo change the audio settings (BASS, \fREBLE,
FADER, BALANCE, EQ) , push the
button or
EN\fER button to select the mode.
BASS ?\fREBLE ?BALANCE ?FADER ?EQ ?
BASS
\fo adjust each audio setting, turn the VOL control dial
clockwise or counterclockwise.
BASS: (í) to decrease \b (+) to increase
\fREB(LE): (í) to decrease \b (+) to increase
BAL(ANCE): (R) to right balance \b (L) to left balance
FADE(R): (F) to front fade \b (R) to rear fade
EQ (Equalizer): Use this control to change the preset
sound mode for CD play.
\furn the MENU\bVOL dial clockwise or counterclock-
wise. \fhe mode will change as follows:
OFF ⇔ENHANCE
If the audio settings mode is unchanged for approxi-
mately 8 seconds, the audio settings mode will
automatically return to the normal mode.
MENU button:
\fo configure the SPEED volume and BEEP settings,
perform the following procedure:
1. Push the MENU button.
2. \furn the VOLUME dial clockwise or counter- clockwise. \fhe display message will change as
follows:
PHONE SE\fUP ⇔SPEED VOL⇔CLOCK ⇔
BEEP ⇔PHONE SE\fUP
. When SPEED VOL appears on the display, briefly
push on the EN\fER button then turn the VOLUME
dial clockwise or counterclockwise to adjust the
level of the volume. Adjusting the setting to 0 (zero) turns off the
speed volume feature. Increasing the speed
volume setting results in the audio volume
increasing more rapidly with vehicle speed. Push
the EN\fER button again to save the setting.
. When BEEP appears on the display, briefly push
the EN\fER button and then turn the VOLUME dial
clockwise or counterclockwise to switch the beep
sound on or off. Push the EN\fER button again to
save the setting.
\fo configure Alternative Frequency, Regional and
Language settings, perform the following procedure:
1. Push and hold the MENU button for at least 1.5 seconds.
2. \furn the VOLUME dial clockwise or counter- clockwise. \fhe display message will change as
follows:
AF⇔REG ⇔LANGUAGE ⇔AF
. \fo activate or deactivate the AF and REG mode,
briefly push on the EN\fER button when AF or
REG appears on the display and turn the
VOLUME dial clockwise or counterclockwise to
switch between the off or on position. After
selection, push the EN\fER button to confirm the
settings.
— When the AF mode is enabled, the audio unit
will automatically re-tune to a stronger fre-
quency if the radio signal becomes weak.
— When the REG mode is enabled, the audio unit will maintain and hold the station which is
broadcasting local (regional) programmes.
. \fo change the display language, briefly push the
EN\fER button when LANGUAGE appears on the
display then turn the VOLUME dial clockwise or
counterclockwise to select the appropriate lan-
guage setting.
Heater and air conditioner, and audio system4-25
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-26Heater and air conditioner, and audio system
ENGLISH⇔DUTCH ⇔FRENCH ⇔SPANISH
⇔ GER\fAN ⇔ITALIAN ⇔PORTUGUESE ⇔
ENGLISH
Aft\br s\bl\bcting th\b d\bsir\bd languag\b, push th\b
ENTER button to \bxit th\b m\bnu.
Aft\br th\b d\bsir\bd l\bv\bls hav\b b\b\bn s\bt, push th\b \fENU
button to \bxit th\b m\bnu or wait at l\bast for 10 s\bconds
without pr\bssing any buttons.
Clock :
Clock display can b\b turn\bd on and off, and clock can
b\b adjust\bd.
. Wh\bn clock is not display\bd
1. Turn th\b audio unit on by pushing th\b POWER ON/OFF button.
2. Push th\b \fENU button and turn th\b VOLU\fE control knob until “CLOCK” is display\bd.
3. Push th\b ENTER button. (“CLOCK OFF” is display\bd)
4. Turn th\b VOLU\fE control knob to turn th\b clock display mod\b on. (“CLOCK ON” is display\bd)
5. Push th\b ENTER button. Th\b hour display will start flashing.
6. Turn th\b VOLU\fE control knob to adjust th\b tim\b.
7. Push th\b ENTER button. Th\b minut\b display will start flashing.
8. Turn th\b VOLU\fE control knob to adjust th\b tim\b.
9. Push th\b ENTER button to finish th\b clock adjustm\bnt.
. Wh\bn clock is display\bd
1. Turn th\b audio unit on by pushing th\b POWER ON/OFF button.
2. Push th\b \fENU button and turn th\b VOLU\fE control knob until “CLOCK” is display\bd. 3. Push th\b ENTER button. (“CLOCK ON” is
display\bd.)
4. P\brform st\bps 5 to 9 abov\b to adjust th\b tim\b.
CD play\br op\bration
JVH0004X
Th\b audio syst\bm op\brat\bs wh\bn th\b ignition switch is
in th\b “ACC” or “ON” position.
Loading:
Ins\brt a CD into th\b slot with th\b lab\bl sid\b facing up.
Th\b CD will b\b guid\bd automatically into th\b slot and
will start playing. If th\b radio is alr\bady playing, it will
automatically turn off, and th\b CD will start playing.
CAUTION:
Do not force the CD into the slot. This could
damage the player.
Aft\br loading th\b CD, th\b numb\br of tracks and th\b
playtim\b will app\bar on th\b display.
8 cm (3.1 in) diam\bt\br CDs can b\b play\bd without
using an adapt\br.
CD button:
Wh\bn th\b
button is push\bd whil\b th\b audio
syst\bm is off and a CD is load\bd, th\b audio syst\bm will
turn on and a CD will start playing automatically. If th\b
radio is alr\bady playing, it will automatically turn off and
th\b CD will start playing.
FF (Fast Forward) , REW (Rewind)
button :
Wh\bn th\b (fast forward) or (r\bwind) button is push\bd
whil\b th\b CD is b\bing play\bd, th\b CD will play whil\b
fast forwarding or r\bwinding. Wh\bn th\b button is
r\bl\bas\bd, th\b CD will r\bturn to normal play sp\b\bd.
TRACK UP/DOWN button:
Wh\bn th\b
button is push\bd whil\b a CD is b\bing
play\bd, th\b pr\bs\bnt track will b\b advanc\bd and mov\b to
th\b n\bxt track. Push th\b
button s\bv\bral tim\bs to
skip forward tracks. Th\b CD will advanc\b th\b numb\br
of tim\bs th\b button is push\bd. Wh\bn th\b last track of
th\b CD is forward\bd, th\b first track will b\b play\bd.
Wh\bn th\b
button is push\bd whil\b a CD is b\bing
play\bd, th\b pr\bs\bnt track will start ov\br from th\b
b\bginning. Push th\b
button s\bv\bral tim\bs to skip
back tracks. Th\b CD will r\bwind th\b numb\br of tim\bs
th\b button is push\bd. Wh\bn th\b first track of th\b CD is
r\bwound, th\b last track will b\b play\bd.
Repeat/MIX button:
Push th\b
button r\bp\bat\bdly to chang\b th\b play
mod\b as follows:
RPT (REPEAT) TRACK ?\fIX DISC ?RPT
(REPEAT) ALL
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
RPT TRACK: The CD player plays the curre\ft track
co\fti\fuously\b
RPT ALL: All the tracks o\f the CD will be played i\f
seque\ftial order\b
MIX DISC: All the tracks o\f the CD will be played i\f a
ra\fdom order\b
CD EJECT button:
Whe\f the
butto\f is pushed while a CD is loaded,
the CD will be ejected\b
Whe\f the
butto\f is pushed twice, the CD will be
ejected further, a\fd the CD ca\f be removed with ease\b
If a CD is ejected by pushi\fg the
butto\f, a\fd it is
\fot take\f out from the loadi\fg slot, the CD will
automatically be reloaded to the slot to protect the CD\b
AUX button:
The AUX IN jack is located o\f the audio u\fit\b The AUX
IN audio i\fput jack accepts a\fy sta\fdard a\falog audio
i\fput such as from a portable cassette tape/CD player,
MP3 player, laptop computers, etc\b
Push the AUX butto\f to play a compatible device whe\f
it is plugged i\fto the AUX IN jack\b
CAUTION:
. Do not allow the cable or an external device
connected to the AUX terminal to affect your
driving.
. Connect a stereo mini-plug (3.5 mm in
diameter) cable to the AUX IN jack. If a
monaural mini-plug cable is used, the audio
will not output correctly.
WARNING:
.Depending on the external device, please
note that the volume may be louder or
quieter than that of the external device.
. When the AUX contacts with the plug of the
connector cable, noise may be heard.
. The connected exterior device cannot be
operated with the main audio system. The
volume and sound quality can be adjusted.
. The song title in the external device cannot
be displayed on the audio display.
. For the power source of the external device,
use the special battery. The external device
cannot be charged with the AUX terminal.
Noise may be heard if the CD, radio etc. is
operated while charging the battery with the
power socket of the vehicle.
FM-AM radio operatio\f
JVH0004X
The audio system operates whe\f the ig\fitio\f switch is
i\f the “ACC” or “ON” positio\f\b
FM-AM button:
Whe\f the
butto\f is pushed while the audio
system is off, the audio system will tur\f o\f a\fd the
radio will tur\f o\f\b Whe\f the
butto\f is pushed
while CD is already operati\fg, it will automatically tur\f
off, a\fd the radio will tur\f o\f\b
To cha\fge the radio ba\fds, push the
butto\f u\ftil
the desired ba\fd appears\b
FM 1 ?FM 2 ?FM T ?MW ?LW
Duri\fg FM receptio\f, whe\f the
butto\f is pushed
for lo\fger tha\f 1\b5 seco\fds, statio\fs are searched for
a\fd the 6 statio\fs of the FM T ba\fd\b The sou\fd is
muted u\ftil the auto store operatio\f is completed,
upo\f which preset cha\f\fel 1 is automatically tu\fed i\f\b
TUNE button:
Whe\f adjusti\fg the broadcasti\fg statio\f freque\fcy
ma\fually, push the
butto\f u\ftil the desired
freque\fcy is achieved\b
The freque\fcy cha\fges i\f steps of 100 kHz o\f the FM
ba\fd, 9 kHz o\f the MW ba\fd, a\fd 3 kHz o\f the LW
ba\fd\b
SEEK button:
Whe\f adjusti\fg the broadcasti\fg statio\f freque\fcy
automatically, push the
butto\f\b Whe\f the
system detects a broadcasti\fg statio\f, it will stop at
the statio\f\b
Heater and air conditioner, and audio system4-27
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-28Heater and air conditioner, and audio system
*1*2*3*4*5*6Radio memory buttons:
The audio system can store u\f to 18 FM station
\brequencies (six in each o\b FM 1, FM 2 and FM T) , 6
MW and 6 LW station \brequencies.
To store the station \brequency manually:
1. Tune to the desired broadcasting station \bre- quency by using the
orbutton.
2. Push and hold a radio memory button
*1-*6until a bee\f sounds. (The radio mutes when the
memory button is \fushed.)
3. The channel indicator will dis\flay and the radio mute disengages, indicating that the memory is
stored \fro\ferly.
4. Per\borm ste\fs 1 - 3 \bor all other memory buttons.
I\b the battery cable is disconnected, or i\b the audio \buse
blows, the radio memory will be erased. In such a case,
reset the desired stations.
Radio data system (RDS)
Alternative Frequency (AF):
. The AF \bunction o\ferates in the FM (radio) and CD
modes.
. When the AF mode is set to “ON” in the user
setu\f menu mode, the AF indicator illuminates.
For activation or deactivation details, see “Audio main
o\feration” (P.4-25) .
. Automatic switching function
This \bunction com\fares the strengths o\b the
signals o\b all the stations on the AF list and
selects the station with the o\ftimum rece\ftion
conditions.
. Program Information (PI) search
Program In\bormation (PI) search begins automati- cally i\b no suitable station is \bound with the above
automatic switching \bunction. The PI search
\bunction checks each RDS station with the same
PI code. During this time the sound is muted and
“PI SEARCH” is dis\flayed. The PI search o\fera-
tion sto\fs when a suitable station is \bound. I\b no
station is \bound once all the \brequencies have been
searched, the radio returns to the \frevious
\brequency.
. Enhanced Other Network (EON) data update
(This function also operates when the AF
mode is off.)
When EON data is being received, this enables
automatic retuning o\b other \freset stations on the
same network. Also, network linked services can
be used. The EON indicator turns on during the
rece\ftion o\b RDS EON stations in the FM mode.
RDS functions:
. Programme Service (PS) function (station
name display function)
When an RDS station is tuned in with seek or
manual tuning, the RDS data is received and the
Program Service (PS) name is dis\flayed.
. Emergency broadcast interrupt function
(ALARM INTERRUPTION —EBU SPEC FOR
INFO)
When the radio receives PTY code 31 (an
emergency broadcast code) , the sound is inter-
ru\fted, the emergency broadcast is heard, and
“PTY31 ALARM” is dis\flayed. The volume level at
this time is the same as that \bor tra\b\bic announce-
ments. Once the emergency broadcast is \binished,
the unit immediately returns to the \frevious
source.
. REG (Regional) mode
Some local radio stations are linked together according to their region because they only o\b\ber
limited coverage due to their limited number o\b
transmitters. I\b the signal \brom one station be-
comes weak while you are driving around, RDS
mode will switch to another local station in the
region with a stronger signal.
When the REG mode is activated in the FM band
and the radio receiver is tuned to a local radio
station, it will kee\f receiving this radio station
without switching to another local station. For
activation or deactivation details, see “Audio main
o\feration” (P.4-25) .
Traffic Announcement (TA):
. The TA \bunction o\ferates in the FM and CD
modes.
. The TA mode is turned on or o\b\b when the TA/
NEWS button is \fushed \bor less than 2 seconds.
. The TA mode o\ferates regardless o\b whether the
AF mode is on or o\b\b.
. “TA ON” is dis\flayed when the TA mode is turned
on, and the TA indicator turns on. “TA OFF” is
dis\flayed when the TA mode is turned o\b\b, and the
TA indicator turns o\b\b.
The \bollowing \bunctions o\ferate when the TA mode is
on:
. Traffic announcement interrupt function
When a tra\b\bic announcement is received, the
announcement is tuned in and the volume
increases to the set level.
Once the tra\b\bic announcement is \binished, the unit
returns to the source which was set be\bore the
tra\b\bic announcement started, and the volume
returns to the \frevious level. For EON stations,
the radio is interru\fted by another EON station
with tra\b\bic announcements.
The tra\b\bic announcement interru\ft mode is
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
cancelled if the TA/NEWS butt\fn is pushed
durin\b a traffic ann\funcement. The TA m\fde
returns t\f the standby m\fde and the audi\f unit
returns t\f the previ\fus s\furce.
News mode
When the NEWS butt\fn is pushed \fr the TA/NEWS
butt\fn is pushed f\fr l\fn\ber than 2 sec\fnds in the FM
m\fde, the news functi\fn is activated. “NEWS” is
displayed f\fr 3 sec\fnds and the NEWS indicat\fr
appears \fn the display.
When the news functi\fn is activated, the radi\f
receives a news c\fde fr\fm the FM br\fadcastin\b news
stati\fn and the actual playin\b m\fde will be interrupted.
Once the news br\fadcast is finished, the unit returns
t\f the previ\fus m\fde.
In s\fme c\funtries \fr re\bi\fns, this service is n\ft
available \fr the si\bnal is t\f\f weak t\f be received.
1. News standby mode
.The news standby m\fde can be activated in
the FM \fr CD m\fde.
.A news interrupti\fn will be ann\funced and“NEWS” will be displayed when the radi\f
detects the news c\fde fr\fm the tuned stati\fn
\fr EON stati\fns. The display will then chan\be
t\f the PS name \ff the interruptin\b stati\fn.
.When pushin\b the NEWS butt\fn \fr pushin\b
the TA/NEWS butt\fn f\fr l\fn\ber than 2
sec\fnds, the news standby m\fde is turned
\fff and the indicat\fr disappears fr\fm the
display.
2. News interruption mode
.When the NEWS butt\fn \fr the TA/NEWS
butt\fn is pushed durin\b the news interrupti\fn
m\fde, the radi\f returns t\f the previ\fus s\furce.
H\fwever, the news standby m\fde is kept.
.When thebutt\fn is pushed durin\b the
news interrupti\fn m\fde, the radi\f chan\bes t\f
the CD m\fde. H\fwever, the news standby
m\fde is kept.
If the radi\f band is chan\bed t\f the MW \fr LW,
the news standby m\fde will be turned \fff.
Heater and air conditioner, and audio system4-29
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-30Heater and air conditioner, and audio system
FM-AM RADIO WITH COMPACT DISC (CD) P\fAYER (Ty\be D)
JVH0011X
1. MUTE button
2. FM·AM radio band select button
3. CD button
4. Radio memory buttons
5. AUX button
6. CD EJECT button
7. DISP button
8. SEEK/TRACK/FI\fE button9. SCAN button
10. RDM (Random) button
11. RPT (Re\beat) button
12. Power button/Volume control knob
13. AUX IN (auxiliary in\but) jack
14. AUTO.P (Automatic Preset) button
15. SCR\f (Scroll) button
16. TUNE/FF (Forward)·REW (Rewind)/FO\fDER
button 17. MENU button
&RQGLWLRQ