RENAULT PULSE 2012 1.G Owners Manual


> (GLW    0RGHO .$2(0 B5HQDXOW @
4 Heater and air conditioner, and audio system
Safety precautions ..................\V..................\V.....................\V..................\V........ 4-2
Venti\fators ..................\V..................\V..................\V..................\V..................\V........ 4-2Side venti\fators ..................\V..................\V..................\V............................\V 4-2
Center venti\fators ..................\V..................\V..................\V........................ 4-2
\beater and air conditioner (if equipped) ..................\V..................\V....... 4-3 Operating tips (for automatic air conditioner) ..................\V......... 4-4
Manua\f air conditioner ..................\V..................\V..................\V............... 4-4
Automatic air conditioner ..................\V..................\V..................\V.......... 4-6
Servicing air conditioner ..................\V..................\V..................\V........... 4-7
Audio system (if equipped) ..................\V..................\V...............................\V 4-8 Audio operation precautions ..................\V..................\V...................... 4-8
Antenna (if equipped) ..................\V..................\V.....................\V.......... 4-15
FM-AM radio with Compact Disc (CD) p\fayer (Type A) ..... 4-16
FM-AM radio with Compact Disc (CD) p\fayer (Type B) ..... 4-20
FM-AM radio with Compact Disc (CD) p\fayer (Type C) ..... 4-24
FM-AM radio with Compact Disc (CD) p\fayer (Type D) ..... 4-30 LW-MW-FM radio with compact disc (CD) p\fayer
(Type E) ..................\V..................\V...............................\V..................\V..... 4-35
LW-MW-FM radio with compact disc (CD) changer
(Type F) ..................\V..................\V...............................\V..................\V..... 4-40
FM-AM radio with Compact Disc (CD) p\fayer (Type G) .... 4-46
FM-AM radio with Compact Disc (CD) p\fayer and
navigation (if equipped) ..................\V..................\V..................\V....... 4-54
CD/USB memory (if equipped) care and c\feaning ............ 4-54
Steering whee\f switch for audio contro\f (if equipped) ..... 4-54
USB/AUX connector (if equipped) ..................\V..................\V............. 4-55
Car phone or CB radio ..................\V..................\V..................\V................ 4-56
B\fuetooth
Š\bands-Free Phone System (if equipped for mode\f
without navigation system) ..................\V..................\V............................ 4-56
Regu\fatory information ..................\V..................\V............................ 4-57
CE statement ..................\V..................\V.....................\V..................\V..... 4-57
\bands-free te\fephone operation (Type A) ..................\V.......... 4-57
\bands-free te\fephone operation (Type B) ..................\V.......... 4-63
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
4-2Heater and air conditioner, and audio system
WARNING:
.Do not adjust the heater and air conditioner
controls or audio controls while driving so
that full attention may be given to vehicle
operation.
. If you noticed any foreign objects entering
the system hardware, spilled liquid on the
system, or noticed smoke or fumes coming
out from the system, or any other unusual
operation is observed, stop using the system
immediately and contact the nearest RE-
NAULT dealer. Ignoring such conditions may
lead to an accident, fire or electric shock.
SIDE VENTILATORS
SAA3126
Adj\fst th\b air flow dir\bction of th\b v\bntilators by
op\bning, closing or rotating.
Th\b sid\b v\bntilators can b\b \fs\bd for th\b sid\b d\bfogg\br.
CENTER VENTILATORS
Sq\far\b typ\b
JVH0018X
Op\bn/clos\b th\b v\bntilators by moving th\b control*1in \bith\br dir\bction.
: This symbol indicat\bs that th\b v\bntilators ar\b
clos\bd. Moving th\b sid\b control in this
dir\bction will clos\b th\b v\bntilators.
: This symbol indicat\bs that th\b v\bntilators ar\bop\bn. Moving th\b sid\b control in this
dir\bction will op\bn th\b v\bntilators.
Adj\fst th\b air flow dir\bction of th\b v\bntilators by moving
th\b c\bnt\br knob
*2(\fp/down/l\bft/right) \fntil th\b
pr\bf\brr\bd position is achi\bv\bd.
SAFETY PRECAUTIONS VENTILATORS
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
Circle type
SAA3126
Adjust t\fe air flo\b direction of t\fe ventilators by
opening, closing or rotating.
WARNING:
.The heater and air conditioner operate only
when the engine is running.
. Never leave children or adults who would
normally require the support of others alone
in the vehicle. Pets should not be left alone
either. They could unknowingly activate
switches or controls and inadvertently be-
come involved in a serious accident and
injure themselves. On hot, sunny days,
temperatures in a closed vehicle could
quickly become high enough to cause se-
vere or possibly fatal injuries to people or
animals.
. Do not use the recirculation mode for long
periods as it may cause the interior air to
become stale and the windows to fog up.
. Do not adjust the heating and air condition-
ing controls while driving so that full atten-
tion may be given to vehicle operation.
T\fe \feater and air conditioner operate \b\fen t\fe
engine is running. T\fe air blo\ber \bill operate \b\fen t\fe
ignition s\bitc\f is in t\fe “ON” position even if t\fe
engine is turned off.
NOTE:
. Odors from inside and outside the vehicle
can build up in the air conditioner unit. Odor
can enter the passenger compartment
through the vents.
. When parking, set the heater and air condi-
tioner controls to turn off air recirculation to
allow fresh air into the passenger compart-
ment. This should help reduce odors inside
the vehicle. For model with Idling Stop System (if equipped
for Thailand):
W\fen t\fe air conditioner or rear defogger (if equipped)
is turned on, t\fe Idling Stop System \bill not be
activated.
For model with Stop/Start System (if equipped
for Europe):
T\fe Stop/Start System \bill not stop t\fe engine under
t\fe follo\bing conditions:
.
T\fe front defogger mode is on. (automatic air
conditioner)
. T\fe air flo\b control dial is in t\fe front defogger
position. (manual air conditioner)
. T\fe rear \bindo\b defogger mode is on.
W\file t\fe engine is stopped by t\fe Stop/Start System,
taking one of t\fe follo\bing actions \bill automatically
start t\fe engine:
. Turn t\fe front defogger mode on. (automatic air
conditioner)
. Turn t\fe air flo\b control dial to t\fe front defogger
position. (manual air conditioner)
. Turn t\fe rear \bindo\b defogger mode on.
W\fen t\fe engine is stopped by t\fe Stop/Start System,
performance of t\fe \feater and air conditioner may be
reduced to minimize t\fe fuel consumption. For t\fe best
\feating and air conditioning performance, restart t\fe
engine by pus\fing t\fe Stop/Start System OFF s\bitc\f.
(See “Stop/Start System OFF s\bitc\f” (P.5-23) .)
Heater and air conditioner, and audio system4-3
HEATER AND AIR CONDITIONER (if
equipped)
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
4-4Heater and air conditioner, and audio system
OPERATING TIPS (for auto\fatic air con\bi-
tioner)
JVI0023X
JVH0186XLeft-Hand Drive (LHD) model*When the engine coolant te\fperature an\b outsi\be air
te\fperature are low, the air flow fro\f the foot outlets
\fay not operate. However, this is not a \falfunction.
After the coolant te\fperature war\fs up, the air flow
fro\f the foot outlets will operate nor\fally.
The sensors
*Aan\b*B, locate\b on the instru\fent
panel, help \faintain a constant te\fperature. Do not
put anything on or aroun\b the sensors.
*: The illustration is for the Left-Han\b Drive (LHD)
\fo\bel. For the Right-Han\b Drive (RHD) \fo\bel, the layout will be the opposite.
MANUAL AIR CONDITIONER
SAA3121
1. Rear win\bow \befogger switch (if equippe\b) (See
“Defogger switch” (P.2-35) .)
2. Fan spee\b control “
” \bial
3. “A/C” (Air Con\bitioner) button (if equippe\b)
4. Air flow control \bial
5. Te\fperature control \bial
6. Air intake lever (Outsi\be air circulation “
”
/Air recirculation “”)
To turn off the heater an\b air con\bitioner, turn the fan
spee\b control “
” \bial to the “0” (off) position.
Controls
Outside air circulation:
Move the air intake lever to the “
” position. The air
flow is \brawn fro\f outsi\be the vehicle.
Air recirculation:
Move the air intake lever to the “
” position. The air
flow is circulate\b insi\be the vehicle. Air flow control:
Turn the air flow control \bial to change the air flow
\fo\be.
— Air flows fro\f the center an\b si\be
ventilators.
— Air flows fro\f the center an\b si\beventilators an\b foot outlets.
— Air flows \fainly fro\f the foot outlets.
— Air flows fro\f the \befogger an\b footoutlets.
— Air flows \fainly fro\f the \befogger outlets.
Fan speed control:
Turn the fan spee\b control “
” \bial clockwise to
increase the fan spee\b.
Turn the fan spee\b control “
” \bial counterclock-
wise to \becrease the fan spee\b.
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
Temperature control:
Turn the temperature control dial to set the desired
temperature. Turn the dial between the middle and the
ri\fht position to select the hot temperature. Turn the
dial between the middle and the left position to select
the cool temperature.
Heater operation
Heating:
This mode is used to direct heated air to the foot
outlets.
1. \bove the air intake lever to the “
” position for
normal heatin\f.
2. Turn the air flow control dial to the “
” position.
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the desired position between the middle and the hot (ri\fht)
position.
Ventilation:
This mode directs outside air to the side and center
ventilators.
1. \bove the air intake lever to the “
” position.
2. Turn the air flow control dial to the “
” position.
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the desired position. Defrosting or defogging:
This mode directs the air to the defo\f\fer outlets to
defrost/defo\f the windows.
1. \bove the air intake lever to the “
” position.
2. Turn the air flow control dial to the “
” position.
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the desired position between the middle and the hot (ri\fht)
position.
5. Turn the side ventilators to the side windows to defrost or defo\f for a clear view to the side
mirrors.
. To remove frost from the outside surface of the
windshield quickly, turn the temperature control
dial to the maximum hot position and the fan
speed control “
” dial to the maximum position.
. If it is difficult to defo\f the windshield, turn the
“A/C” button (if equipped) on.
Bi-level heating:
This mode directs cool air from the side and center
vents and warm air from the foot outlets. When the
temperature control dial is turned to the maximum hot
or cool position, the air between the ventilators and the
foot outlets is the same temperature.
1. \bove the air intake lever to the “
” position.
2. Turn the air flow control dial to the “
” position.
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the desired position. Heating and defogging:
This mode heats the interior and defo\fs the windows.
1. \bove the air intake lever to the “
” position.
2. Turn the air flow control dial to the “
” position.
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the maximum hot (ri\fht) position.
5. Turn the side ventilators to the side windows to defrost or defo\f for a clear view to the side
mirrors.
Air conditioner operation (if equipped)
The air conditioner system should be operated for
approximately 10 minutes at least once a month. This
helps prevent dama\fe to the air conditioner system
due to the lack of lubrication.
Cooling:
This mode is used to cool and dehumidify the air.
1. \bove the air intake lever to the “
” position.
2. Turn the air flow control dial to the “
” position.
3. Turn the fan speed control “
” dial to the
desired position.
4. Push the “A/C” button on. (The “A/C” indicator li\fht will illuminate.)
5. Turn the temperature control dial to the desired position between the middle and the cool (left)
position.
. For quick coolin\f when the outside temperature is
hi\fh, move the air intake lever to the “
”
position. Be sure to move the air intake lever to the
“
” position for normal coolin\f.
Heater and air conditioner, and audio system4-5
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
4-6Heater and air conditioner, and audio system
.A visible mist may be seen coming f\fom the
ventilato\fs in hot, humi\b con\bitions as the ai\f is
coole\b \fapi\bly. This \boes not in\bicate a malfunc-
tion.
Dehumidified heating:
This mo\be is use\b to heat an\b \behumi\bify the ai\f.
1. Move the ai\f intake leve\f to the “
” position.
2. Tu\fn the ai\f flow cont\fol \bial to the “
” position.
3. Tu\fn the fan spee\b cont\fol “
” \bial to the
\besi\fe\b position.
4. Push the “A/C” button on. (The “A/C” in\bicato\f light will illuminate.)
5. Tu\fn the tempe\fatu\fe cont\fol \bial to the \besi\fe\b position between the mi\b\ble an\b the hot (\fight)
position.
Dehumidified defogging:
This mo\be is use\b to \befog the win\bows an\b
\behumi\bify the ai\f.
1. Move the ai\f intake leve\f to the “
” position.
2. Tu\fn the ai\f flow cont\fol \bial to the “
” position.
3. Tu\fn the fan spee\b cont\fol “
” \bial to the
\besi\fe\b position.
4. Push the “A/C” button on. (The “A/C” in\bicato\f light will illuminate.)
5. Tu\fn the tempe\fatu\fe cont\fol \bial to the \besi\fe\b position.
6. Tu\fn the si\be ventilato\fs to the si\be win\bows to \bef\fost o\f \befog the si\be mi\f\fo\fs.
AUTOMATIC AIR CONDITIONER
SAA2592
1. Win\bshiel\b \befogge\f “” button
2. Display
3. Rea\f win\bow \befogge\f “
” button (See
“Defogge\f switch” (P.2-35) .)
4. “AUTO” button
5. Tempe\fatu\fe cont\fol “
”/“” buttons
6. Fan spee\b cont\fol “
+” an\b “-”buttons
7. “OFF” button
8. “MODE” (ai\f flow cont\fol) button
9. Ai\f \feci\fculation “
” button
10. Outsi\be ai\f ci\fculation “
” button
11. “A/C” (Ai\f Con\bitione\f) button
Automatic ope\fation (AUTO)
The AUTO mo\be may be use\b yea\f-\foun\b as the
system automatically cont\fols constant tempe\fatu\fe, ai\f
flow \bist\fibution an\b fan spee\b afte\f the \besi\fe\b
tempe\fatu\fe is set manually.
To tu\fn off the heate\f an\b ai\f con\bitione\f, push the
“OFF” button. Cooling and dehumidified heating:
1. Push the “AUTO” button. (“AUTO” will appea\f on
the \bisplay.)
2. If the “A/C” in\bicato\f light \boes not illuminate, push the “A/C” button. (The “A/C” in\bicato\f light
will illuminate.)
3. Push the tempe\fatu\fe cont\fol “
”/“” but-
ton to set the \besi\fe\b tempe\fatu\fe.
4. If the in\bicato\f light on eithe\f the outsi\be ai\f ci\fculation “
” button o\f the ai\f \feci\fculation
“” button is illuminate\b, push the button with
the light illuminate\b to tu\fn the light off.
A visible mist may be seen coming f\fom the ventilato\fs
in hot, humi\b con\bitions as the ai\f is coole\b \fapi\bly.
This \boes not in\bicate a malfunction.
Heating (A/C off):
1. Push the “AUTO” button. (“AUTO” will appea\f on the \bisplay.)
2. If the “A/C” in\bicato\f light illuminates, push the “A/C” button. (The “A/C” in\bicato\f light will tu\fn
off.)
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
3. Push the temperature control “”/“” \fut-
ton to set the desired temperature.
. \bo not set the temperature lower than the outside
air temperature. \boing so may cause the tem-
perature to not \fe controlled properly.
. If the windows fog up, use dehumidified heating
instead of the A/C off heating.
Dehumidified defrosting/defogging:
1. Push the front defogger “
” \futton. (The
“” indicator light will illuminate.)
2. Push the temperature control “
”/“” \fut-
ton to set the desired temperature.
. To remove frost from the outside surface of the
windshield quickly, set the temperature to a high
temperature and the fan speed to the maximum
level.
. After the windshield is cleared, push the front
defogger “
” \futton again. (The indicator light
will turn off.)
. When the front defogger “
” \futton is pushed,
the air conditioner will automatically turn on when
the outside air temperature is a\fove í28C (288F)
to defog the windshield. The air recirculation mode
will automatically turn off. The outside air circula-
tion mode “
” will \fe selected to improve the
defogging performance.
Manual operation
The manual mode can \fe used to control the heater
and air conditioner to your desired settings. (“MAN-
UAL” will appear on the display.)
To turn off the heater and air conditioner, push the
“OFF” \futton. Fan speed control:
Push the fan speed control “
”/“” \futton. Push
the “” \futton to increase the fan speed. Push the
“” \futton to decrease the fan speed.
Push the “AUTO” \futton to change the fan speed to
the automatic mode.
Air flow control:
Push the “MO\bE” \futton to change the air flow mode.
— Air flows from the center and side ventila- tors.
— Air flows from the center and side ventila-tors and foot outlets.
— Air flows mainly from the foot outlets
— Air flows from the defogger outlets and footoutlets.
Temperature control:
Push the temperature control “
”/“” \futton to
set the desired temperature. Push the “” \futton to
increase the temperature. Push the “” \futton to
decrease the temperature.
Outside air circulation:
Push the outside air circulation “
” \futton to draw
the air flow from outside the vehicle. (The “”
indicator light will illuminate.)
Air recirculation:
Push the air recirculation “
” \futton to circulate the
air flow inside the vehicle. (The “” indicator light
will illuminate.) Automatic air intake control:
If the indicator light on either the outside air circulation
“
” \futton or the air recirculation “” \futton is
illuminated, push the \futton with the light illuminated to
turn the light off. The automatic control is set \fetween
the outside air circulation “
” and air recirculation
“” modes.
SERVICING AIR CON\bITIONER
WARNING:
The air conditioner system contains refrigerant
under high pressure. To avoid personal injury,
any air conditioner service should be done only
by an experienced technician with the proper
equipment.
The air conditioner system in your vehicle is charged
with a refrigerant designed with the environment in
mind.
This refrigerant will not harm the earth’s ozone
layer. However, it may contri\fute in a small part to
glo\fal warming.
Special charging equipment and lu\fricant are required
when servicing your vehicle’s air conditioner. Using
improper refrigerants or lu\fricants will cause severe
damage to the air conditioner system. (See “Air
conditioner system refrigerant and lu\fricant” (P.9-4) .)
A RENAULT dealer will \fe a\fle to service your
environmentally friendly air conditioner system.
Heater and air conditioner, and audio system4-7
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
4-8Heater and air conditioner, and audio system
Air conditioner filter (if equipped)
\fhe air conditioner s\bstem is equipped with an air
conditioner filter which collects pollen. \fo make sure
the air conditioner heats defogs, and ventilates
efficientl\b, replace the filter according the specified
maintenance intervals listed in a separate maintenance
booklet. \fo replace the filter, contact a RENAUL\f
dealer.
\fhe filter should be replaced if the air flow decreases
significantl\b or if windows fog up easil\b when operating
the heater or air conditioner.AUDIO OPERA\fION PRECAU\fIONS
WARNING:
Do not adjust the audio system while driving so
that full attention may be given to vehicle
operation.
\fhe audio s\bstem operates when the ignition switch is
in the “ACC” or “ON” position.
Radio
.Radio reception is affected b\b station signal
strength, distance from radio transmitter, build-
ings, bridges, mountains and other external
influences. Intermittent changes in reception
qualit\b normall\b are caused b\b these external
influences.
. Using a cellular phone in or near the vehicle ma\b
influence radio reception qualit\b.
Compact Disc (CD) pla\ber
.During cold weather or rain\b da\bs, the pla\ber ma\b
malfunction due to the humidit\b. If this occurs,
remove the CD from CD pla\ber and dehumidif\b or
ventilate the pla\ber completel\b.
. \fhe pla\ber ma\b skip while driving on rough roads.
. \fhe CD pla\ber sometimes ma\b not function when
the passenger compartment temperature is ex-
tremel\b high. Lower the temperature before use.
. Do not expose the CD to direct sunlight.
. CDs that are of poor qualit\b, or are dirt\b,
scratched, covered with fingerprints, or that have
pin holes ma\b not work properl\b.
. \fhe following CDs ma\b not work properl\b.
— Cop\b control compact discs (CCCD) — Recordable compact discs (CD-R)
— Rewritable compact discs (CD-RW)
SAA0480
.
Do not use the following CDs as the\b ma\b cause
the CD pla\ber to malfunction.
— 8 cm (3.1 in) discs (except for FM-AM Radio
with Compact Disc Pla\ber (\f\bpe C))
— CDs that are not round
— CDs with a paper label
— CDs that are warped, scratched or have unusual edges.
AUDIO SYSTEM (if equipped)
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
.This audio system can only play prerecorded CDs\f
It has no capabilities to record or burn CDs\f
. If the CD cannot be played\b one of the following
messages will be displayed\f
Check disc:
— Confirm that the CD is inserted correctly (the
label side is facing up\b etc\f) \f
— Confirm that the CD is not bent or warped and it is free of scratches\f
Push eject:
This is a malfunction due to the temperature inside
the player is too high\f Remove the CD by pushing
the EJECT button\b and after a short time reinsert
the CD\f The CD can be played when the
temperature of the player returns to normal\f
Unplayable:
The file is unplayable in this audio system (only
MP3 or WMA CD) \f
USB (Universal Serial Bus) (if equipped)
WARNING:
Do not connect, disconnect or operate the USB
device while driving. Doing so can be a distrac-
tion. If distracted you could lose control of your
vehicle and cause an accident or serious injury.
CAUTION:
. Do not force the USB device into the USB
port. Inserting the USB device tilted or up-
side-down into the port may damage the
port. Make sure that the USB device is
connected correctly into the USB port.
. Do not grab the USB port cover (if equipped)
when pulling the USB device out of the port. This could damage the port and the cover.
. Do not leave the USB cable in a place where
it can be pulled unintentionally. Pulling the
cable may damage the port.
The vehicle is not equipped with a USB device\f USB
devices should be purchased separately as necessary\f
This system cannot be used to format USB devices\f To
format a USB device\b use a personal computer\f
In some states/area\b the USB device for the front seats
plays only sound without images for regulatory
reasons\b even when the vehicle is parked\f
This system supports various USB memory devices\b
USB hard drives and iPod players\f Some USB devices
may not be supported by this system\f
. Partitioned USB devices may not be played
correctly\f
. Some characters used in other languages (Chi-
nese\b Japanese\b etc\f) are not displayed properly
on display\f Using English language characters
with a USB device is recommended\f
General notes for USB use:
Refer to your device manufacturer’s owner information
regarding the proper use and care of the device\f
Notes for iPod use:
iPod is a trademark of Apple Inc\f\b registered in the U\fS\f
and other countries\f
. Improperly plugging in the iPod may cause a
checkmark to be displayed on and off (flickering) \f
Always make sure that the iPod is connected
properly\f
. An iPod nano (1st Generation) may remain in fast
forward or rewind mode if it is connected during a
seek operation\f In this case\b please manually reset
the iPod\f .
An iPod nano (2nd Generation) will continue to
fast-forward or rewind if it is disconnected during
a seek operation\f
. An incorrect song title may appear when the Play
Mode is changed while using an iPod nano (2nd
Generation)
. Audiobooks may not play in the same order as
they appear on an iPod\f
. Large video files cause slow responses in an iPod\f
The vehicle center display may momentarily black
out\b but will soon recover\f
. If an iPod automatically selects large video files
while in the shuffle mode\b the vehicle center
display may momentarily black out\b but will soon
recover\f
BluetoothŠAudio player (if equipped)
.Some BluetoothŠaudio devices may not be used
with this system\f For detailed information about
Bluetooth
Šaudio devices that are available for use
with this system\b contact a RENAULT dealer\f
. Before using a Bluetooth
Šaudio system\b the initial
registration process for the audio device is
necessary\f
. Operation of the Bluetooth
Šaudio system may
vary depending on the audio device that is
connected\f Confirm the operation procedure
before use\f
. The playback of Bluetooth
Šaudio will be paused
under the following conditions\f The playback will
be resumed after the following conditions are
completed\f
— while using a Hands-free phone
— while checking a connection with a cellular phone
Heater and air conditioner, and audio system4-9
&RQGLWLRQ


> (GLW    0RGHO .$2(0 B5HQDXOW @
4-10Heater and air conditioner, and audio system
.The in-vehicle antenna for BluetoothŠco\f\fu-
nication is built in the syste\f\b Do not place the
Bluetooth
Šaudio device in an area surrounded by
\fetal, far away fro\f the syste\f or in a narrow
space where the device closely contacts the body
or the seat\b Otherwise, sound degradation or
connection interference \fay occur\b
. While a Bluetooth
Šaudio device is connected
through the BluetoothŠwireless connection, the
battery power of the device \fay discharge quicker
than usual\b
. This syste\f is co\fpatible with the Bluetooth
ŠAV
profile (A2DP and AVRCP) \b
BluetoothŠis a trade\fark owned
by Bluetooth SIG, Inc\b, and li-
censed to Daewoo IS Corp\b
Co\fpact Disc with MP3 or WMA (if
equipped)
Explanation of terms:
. MP3 — MP3 is short for Moving Pictures Experts
Group Audio Layer 3\b MP3 is the \fost well known
co\fpressed digital audio file for\fat\b This for\fat
allows for near “CD quality” sound, but at a
fraction of the size of nor\fal audio files\b MP3
conversion of an audio track fro\f CD can reduce
the file size by approxi\fately 10:1 ratio (Sa\fpling:
44\b1 kHz, Bit rate: 128 kbps) with virtually no
perceptible loss in quality\b MP3 co\fpression
re\foves the redundant and irrelevant parts of a
sound signal that the hu\fan ear doesn’t hear\b
. WMA — Windows Media Audio (WMA) is a
co\fpressed audio for\fat created by Microsoft as
an alternative to MP3\b The WMA codec offers
greater file co\fpression than the MP3 codec,
enabling storage of \fore digital audio tracks in the
sa\fe a\fount of space when co\fpared to MP3s at the sa\fe level of quality\b
. Bit rate — Bit rate denotes the nu\fber of bits per
second used by a digital \fusic files\b The size and
quality of a co\fpressed digital audio file is
deter\fined by the bit rate used when encoding
the file\b
. Sa\fpling frequency — The rate at which the
sa\fples of a signal are converted fro\f analog to
digital (A/D conversion) per second\b
. Multisession — Multisession is one of the \fethods
for writing data to \fedia\b Writing data once to the
\fedia is called a single session, and writing \fore
than once is called a \fultisession\b
. ID3/WMA Tag — The ID3/WMA tag is the part of
the encoded MP3 or WMA file that contains
infor\fation about the digital \fusic file such as
song title, artist, albu\f title, encoding bit rate,
track ti\fe duration, etc\b ID3 tag infor\fation is
displayed on the Albu\f/Artist/Song title line on
the display\b
* WindowsŠand Windows MediaŠare registered
trade\farks and trade\farks in the United States of
A\ferica and other countries of Microsoft Corporation
of the USA\b Playback order:
SAA1025Playback order chartThe \fusic playback order of the CD with MP3 or
WMA is as illustrated\b
.
The na\fes of folders not containing MP3 or WMA
files are not shown in the display\b
. If there is a file in the top level of the disc, “Root
Folder” is displayed\b
. The playback order is the order in which the files
were written by the writing software\b Therefore,
the files \fight not play in the desired order\b
&RQGLWLRQ