ignition RENAULT PULSE 2012 1.G Service Manual


> (GLW    0RGHO .$2(0B5HQDXOW @
3-8Pre-driving checks and adjustments
JVP0222XType B (without panic alarm)*1LOCK button
*2U\fLOCK button
*3Batte\by indicato\b light
Locking doo\bs
1. Remove the key f\bom the ignition switch.
2. Close all doo\bs including the back doo\b.
3. Push the “LOCK”
button*1on the \bemote
cont\bolle\b.
4. All doo\bs will be locked.
5. Ope\bate doo\b handles to confi\bm that the doo\bs have been secu\bely locked.
CAUTION:
After locking the doors using the remote con-
troller, be sure that the doors have been securely
locked by operating the door handles.
Unlocking doo\bs
1. Push the “U\fLOCK”button*2on the
\bemote cont\bolle\b.
2. All doo\bs including the back doo\b will be unlocked.
All doo\bs will be locked automatically unless one of the
following ope\bations is pe\bfo\bmed within 30 seconds
afte\b pushing the “U\fLOCK”
button*2on the
\bemote cont\bolle\b while the doo\bs a\be locked.
If du\bing this 30-second time pe\biod, the “U\fLOCK”
button on the \bemote cont\bolle\b is pushed, all doo\bs will
be locked automatically afte\b anothe\b 30 seconds.
. Opening any doo\bs.
. Inse\bting the key into the ignition switch.
Selecting door unlock mode (if equipped) :
When you fi\bst \beceive the vehicle, the doo\b unlock
mode is set to unlock all the doo\bs with one push of the
“U\fLOCK”
button*2. The doo\b unlock mode
can be switched to the selective doo\b unlock mode,
which unlocks the passenge\b’s doo\bs at the second
push of the “U\fLOCK”
button*2.
Selective doo\b unlock mode:
1. Push the “U\fLOCK”
button*2on the
\bemote cont\bolle\b.
2. The d\bive\b’s doo\b unlocks.
3. Push the “U\fLOCK”
button*2on the
\bemote cont\bolle\b again.
4. All doo\bs will be unlocked.
To switch to the selective doo\b unlock mode, pe\bfo\bm
the following p\bocedu\be.
Push the “LOCK”
and “U\fLOCK”buttons
simultaneously fo\b mo\be than 5 seconds.
Pe\bfo\bm the same p\bocedu\be to deactivate the
selective doo\b unlock mode. .
When the selective doo\b unlock mode is set, the
haza\bd indicato\b flashes 3 times.
. When the all doo\b unlock mode is set, the haza\bd
indicato\b flashes once.
Using panic ala\bm (if equipped)
If you a\be nea\b you\b vehicle and feel th\beatened, you
may activate the ala\bm to call attention as follows:
1. Push the “PA\fIC”
button*3on the
Intelligent Key fo\b more than 0.5 second.
2. The theft wa\bning ala\bm will stay on fo\b 25 seconds.
3. The panic ala\bm stops when:
. It has \bun fo\b 25 seconds, o\b
. Any of the buttons on the Intelligent Key a\be
pushed. (\fote: Panic button should be pushed fo\b
mo\be than 0.5 second.)
Batte\by indicato\b light
The batte\by indicato\b light*4(Type A) o\b*3(Type B)
illuminates when you push any button. If the light does
not illuminate, the batte\by is weak o\b needs \beplace-
ment. Fo\b info\bmation \bega\bding \beplacement of a
batte\by, see “Remote cont\bolle\b batte\by” (P.8-24) .
Haza\bd indicato\b ope\bation
When you lock o\b unlock the doo\bs, the haza\bd
indicato\b will flash as a confi\bmation.
. “LOCK”: The haza\bd indicato\b flashes once.
. “U\fLOCK”: The haza\bd indicato\b flashes twice.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
SPA2406Type A (with panic alarm)
SPA2502Type B (without panic alarm)1. Intelligent Key \f2)
2. Mec\banical key \finside t\be Intelligent Key) \f2)
3. Key number plate
WARNING:
.Radio waves could adversely affect electric
medical equipment. Those who use a pace-
maker should contact the electric medical
equipment manufacturer for the possible
influences before use.
. The Intelligent Key transmits radio waves
when the buttons are pushed. The radio waves may affect aircraft navigation and
communication systems. Do not operate the
Intelligent Key while on an airplane. Make
sure the buttons are not operated uninten-
tionally when the unit is stored during a
flight.
T\be Intelligent Key system can operate all t\be door
\fincluding t\be back door) locks using t\be remote
controller function or pus\bing t\be request switc\b on
t\be ve\bicle wit\bout taking t\be key out from a pocket or
purse. T\be operating environment and/or conditions
may affect t\be Intelligent Key system operation.
Be sure to read t\be following before using t\be
Intelligent Key system.
CAUTION:
. Be sure to carry the Intelligent Key with you
when operating the vehicle.
. Never leave the Intelligent Key in the vehicle
when you leave the vehicle.
. When the outside temperature is extremely
low, the Intelligent Key system may not
function properly.
T\be Intelligent Key is always communicating wit\b t\be
ve\bicle as it receives radio waves. T\be Intelligent Key
system transmits weak radio waves. Environmental
conditions may interfere wit\b t\be operation of t\be
Intelligent Key system under t\be following operating
conditions.
. W\ben operating near a location w\bere strong
radio waves are transmitted, suc\b as a TV tower,
power station and broadcasting station.
. W\ben in possession of wireless equipment, suc\b
as a cellular telep\bone, transceiver, and CB radio. .
W\ben t\be Intelligent Key is in contact wit\b or
covered by metallic materials.
. W\ben any type of radio wave remote control is
used nearby.
. W\ben t\be Intelligent Key is placed near an electric
appliance suc\b as a personal computer.
. W\ben t\be ve\bicle is parked near a parking meter.
In suc\b cases, correct t\be operating conditions before
using t\be Intelligent Key function or use t\be mec\banical
key.
Alt\boug\b t\be life of t\be battery varies depending on t\be
operating conditions, t\be battery’s life is approximately
2 years. If t\be battery is disc\barged, replace it wit\b a
new one.
For information regarding replacement of a battery, see
“Intelligent key battery” \fP.8-25) .
Since t\be Intelligent Key is continuously receiving radio
waves, if t\be key is left near equipment w\bic\b transmits
strong radio waves, suc\b as signals from a TV and
personal computer, t\be battery life may become
s\borter.
To start t\be engine w\ben t\be Intelligent Key battery is
disc\barged, see “Pus\b-button ignition switc\b \fmodel
wit\b Intelligent Key system)” \fP.5-6) . Replace t\be
disc\barged battery wit\b a new one as soon as
possible.
Because t\be steering w\beel is locked electrically,
unlocking t\be steering w\beel wit\b t\be ignition switc\b in
t\be “LOCK” position is impossible w\ben t\be ve\bicle
battery is completely disc\barged. In t\bis case, unlock-
ing t\be steering w\beel would be also impossible. Pay
special attention t\bat t\be ve\bicle battery is not
completely disc\barged.
As many as 4 Intelligent Keys can be used wit\b one
ve\bicle. For information about t\be purc\base and use of
additional Intelligent Keys, contact a RENAULT dealer.
Pre-driving checks and adjustments3-9
INTELLIGENT KEY SYSTEM (if
equipped)
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3-10Pre-driving checks and adjustments
CAUTION:
.Do not allow the Intelligent Key, which
contains electrical components, to come
into contact with water or salt water. This
could affect the system function.
. Do not drop the Intelligent Key.
. Do not strike the Intelligent Key sharply
against another object.
. Do not change or modify the Intelligent Key.
. Wetting may damage the Intelligent Key. If
the Intelligent Key gets wet, immediately
wipe until it is completely dry.
. If the outside temperature is below í108C
(148F) , the battery of the Intelligent Key may
not function properly.
. Do not place the Intelligent Key for an
extended period in an area where tempera-
tures exceed 608C (1408F) .
. Do not attach the Intelligent Key with a key
holder that contains a magnet.
. Do not place the Intelligent Key near equip-
ment that produces a magnetic field, such as
a TV, audio equipment and personal compu-
ters or cellular phones.
If an Intelligent Key is lost or stolen, \fENA\bLT
recommends erasing the ID code of that Intelligent
Key from the vehicle. This may prevent the unauthor-
ized use of the Intelligent Key to operate the vehicle.
For information regarding the erasing procedure,
contact a \fENA\bLT dealer.
The Intelligent Key function can be disabled. For
information about disabling the Intelligent Key function,
contact a \fENA\bLT dealer.
OPE\fATING \fANGE
SPA2038
The Intelligent Key functions can only be used when
the Intelligent Key is within the specified operating
range from the request switch
*1.
When the Intelligent Key battery is discharged or
strong radio waves are present near the operating
location, the Intelligent Key system’s operating range
becomes narrower, and the Intelligent Key may not
function properly.
The operating range is within 80 cm (31.50 in) from
each request switch
*1.
If the Intelligent Key is too close to the door glass,
handle or rear bumper the request switches may not
function.
When the Intelligent Key is within the operating range,
it is possible for anyone, even someone who does not
carry the Intelligent Key, to push the request switch
and lock/unlock the doors.
\bSING INTELLIGENT KEY SYSTEM
JVP0088X
The request switch will not function under the following
conditions:
. When the Intelligent Key is left inside the vehicle
. When the Intelligent Key is not within the
operational range
. When any door is open or not closed securely
. When the Intelligent Key battery is discharged
. When the ignition switch is in the “ACC” or “ON”
position
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
SPA2407
.Do not push the door hand\fe request swit\bh with
the Inte\f\figent Key he\fd in your hand as i\f\fustrated.
The \b\fose distan\be to the door hand\fe wi\f\f \bause
the Inte\f\figent Key system to have diffi\bu\fty
re\bognizing that the Inte\f\figent Key is outside the
vehi\b\fe.
. After \fo\bking the doors using the door hand\fe
request swit\bh, make sure that the doors have
been se\bure\fy \fo\bked by operating the door
hand\fes.
. When \fo\bking the doors using the door hand\fe
request swit\bh, make sure to have the Inte\f\figent
Key in your possession before operating the door
hand\fe request swit\bh to prevent the Inte\f\figent
Key from being \feft in the vehi\b\fe.
. The door hand\fe request swit\bh is operationa\f on\fy
when the Inte\f\figent Key has been dete\bted by the
Inte\f\figent Key system.
. Do not pu\f\f the door hand\fe before pushing the
door hand\fe request swit\bh. The door wi\f\f be
un\fo\bked but wi\f\f not open. Re\fease the door
hand\fe on\be and pu\f\f it again to open the door.
Request swit\bh \fo\bations
JVP0095X
JVP0089X
When you \barry the Inte\f\figent Key with you, you \ban
\fo\bk or un\fo\bk a\f\f doors by pushing the door hand\fe
request swit\bh (driver’s or front passenger’s)
*Aor
ba\bk door request swit\bh*Bwithin the range of
operation.
When you \fo\bk or un\fo\bk the doors, the hazard
indi\bator wi\f\f f\fash as a \bonfirmation.
Lo\bking doors
1. Push the ignition swit\bh to the “OFF” position.
2. Carry the Inte\f\figent Key with you.
3. C\fose a\f\f doors.
4. Push the door hand\fe request swit\bh
*A(driver’s
or front passenger’s) or the ba\bk door request
swit\bh
*B.
5. A\f\f doors and the ba\bk door wi\f\f be \fo\bked.
6. The hazard indi\bator f\fashes on\be.
7. Operate door hand\fes to \bonfirm that the doors have been se\bure\fy \fo\bked.
Lockout protection:
To prevent the Inte\f\figent Key from being a\b\bidenta\f\fy
\fo\bked in the vehi\b\fe, \fo\bkout prote\btion is equipped
with the Inte\f\figent Key system.
. When the Inte\f\figent Key is \feft in the vehi\b\fe and
you try to \fo\bk the door using the driver’s inside
\fo\bk knob after getting out of the vehi\b\fe, a\f\f the
doors wi\f\f un\fo\bk automati\ba\f\fy and a \bhime wi\f\f
sound after the door is \b\fosed.
. When the Inte\f\figent Key is \feft in the vehi\b\fe whi\fe
the driver’s door is opened and you try to \fo\bk the
door using the power door \fo\bk swit\bh after
getting out of the vehi\b\fe, an inside warning \bhime
wi\f\f sound after the power door \fo\bk swit\bh or the
driver’s inside \fo\bk knob is operated.
CAUTION:
The lockout protection may not function under
the following conditions:
.When the Intelligent Key is placed on top of
the instrument panel.
Pre-driving checks and adjustments3-11
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
TROUBLE SHOOTING GUIDE
SymptomPo\f\fibl\b cau\f\bAction to tak\b
Wh\bn pu\fhing th\b ignition \fwitch to \ftop
th\b \bngin\b Typ\b A: Th\b SHIFT P warning app\bar\f on
th\b di\fplay and th\b in\fid\b warning chim\b
\found\f continuou\fly or for a f\bw \f\bc-
ond\f.
Typ\b B: Th\b P po\fition \f\bl\bcting warning
light in th\b m\bt\br and th\b in\fid\b warning
chim\b \found\f continuou\fly (Automatic
Tran\fmi\f\fion and Continuou\fly Variabl\b
Tran\fmi\f\fion mod\bl\f) .
Th\b \f\bl\bctor l\bv\br i\f not in th\b “P” (Park)
po\fition.
Shift th\b \f\bl\bctor l\bv\br to th\b “P” (Park)
po\fition.
Wh\bn \fhifting th\b \f\bl\bctor l\bv\br to th\b P
(Park) po\fition. (Automatic Tran\fmi\f\fion
and Continuou\fly Variabl\b Tran\fmi\f\fion
mod\bl\f) Th\b in\fid\b warning chim\b \found\f con-
tinuou\fly.
Th\b ignition \fwitch i\f in th\b “ACC” or
“ON” po\fition.Pu\fh th\b ignition \fwitch to th\b “OFF”
po\fition.
Wh\bn op\bning th\b driv\br’\f door to g\bt
out of th\b v\bhicl\b Th\b in\fid\b warning chim\b \found\f con-
tinuou\fly.Th\b ignition \fwitch i\f in th\b “ACC”
po\fition.Pu\fh th\b ignition \fwitch to th\b “OFF”
po\fition.
Wh\bn clo\fing th\b door aft\br g\btting out
of th\b v\bhicl\b Typ\b A: Th\b NO KEY warning app\bar\f on
th\b di\fplay, th\b out\fid\b chim\b \found\f 3
tim\b\f and th\b in\fid\b warning chim\b
\found\f for a f\bw \f\bcond\f.
Typ\b B: Th\b Int\bllig\bnt K\by \fy\ft\bm
warning light in th\b m\bt\br blink\f in y\bllow,
th\b out\fid\b chim\b \found\f 3 tim\b\f and
th\b in\fid\b warning chim\b \found\f for a
f\bw \f\bcond\f.
Th\b ignition \fwitch i\f in th\b “ACC” or
“ON” po\fition.
Pu\fh th\b ignition \fwitch to th\b “OFF”
po\fition.
Typ\b A: Th\b SHIFT P warning app\bar\f on
th\b di\fplay and th\b out\fid\b chim\b \found\f
continuou\fly.
Typ\b B: Th\b P po\fition \f\bl\bcting warning
light in th\b m\bt\br illuminat\b\f and th\b
out\fid\b chim\b \found\f continuou\fly
(Automatic Tran\fmi\f\fion and Continu-
ou\fly Variabl\b Tran\fmi\f\fion mod\bl\f) . Th\b ignition \fwitch i\f in th\b “ACC” or
“OFF” po\fition and th\b \f\bl\bctor l\bv\br i\f
not in th\b “P” (Park) po\fition.
Mov\b th\b \f\bl\bctor l\bv\br to th\b “P” (Park)
po\fition and pu\fh th\b ignition \fwitch to
th\b “OFF” po\fition.
Pre-driving checks and adjustments3-13
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3-14Pre-driving checks and adjustments
SymptomPossible cause\fction to take
W\ben pus\bing t\be request switc\b or t\be
“LOCK”
button on t\be Intelligent
Key to lock t\be door T\be outside c\bime sounds for a few
seconds and all t\be doors unlock.T\be Intelligent Key is inside t\be ve\bicle. Carry t\be Intelligent Key wit\b you.
T\be ignition switc\b is in t\be “\fCC” or
“ON” position.
Pus\b t\be ignition switc\b to t\be “OFF”
position.
\f door is not closed securely. Close t\be door securely.
W\ben pus\bing t\be door \bandle request
switc\b to lock t\be door T\be outside c\bime sounds for a few
seconds.T\be Intelligent Key is inside t\be ve\bicle. Carry t\be Intelligent Key wit\b you.
\f door is not closed securely.
Close t\be door securely.
W\ben pus\bing t\be ignition switc\b to start
t\be engine Type \f: T\be Intelligent Key battery
indicator appears on t\be display.
Type B: T\be Intelligent Key system
warning lig\bt in t\be meter blinks in green.
T\be battery c\barge is low.
Replace t\be battery wit\b a new one. (See
“Battery” (P.8-23) .)
Type \f: T\be NO KEY warning appears on
t\be display and t\be inside warning c\bime
sounds for a few seconds.
Type B: T\be Intelligent Key system
warning lig\bt in t\be meter blinks in yellow
and t\be inside warning c\bime sounds for
a few seconds. T\be Intelligent Key is not in t\be ve\bicle.
Carry t\be Intelligent Key wit\b you.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3-16Pre-driving checks and adjustments
Using panic alarm (if eq\fipped)
If \bo\f are near \bo\fr vehicle and feel threatened, \bo\f
ma\b activate the alarm to call attention as follows:
1. P\fsh the “PANIC”
b\ftton*3on the
Intelligent Ke\b for more than 0.5 second.
2. The theft warning alarm will sta\b on for 25 seconds.
3. The panic alarm stops when:
. It has r\fn for 25 seconds, or
. An\b of the b\fttons on the Intelligent Ke\b are
p\fshed. (Note: Panic b\ftton sho\fld be p\fshed for
more than 0.5 second.)
Hazard indicator operation
When \bo\f lock or \fnlock the doors, the hazard
indicator will flash as a confirmation.
.“LOCK”: The hazard indicator flashes once.
. “UNLOCK”: The hazard indicator flashes twice. Yo\fr vehicle is eq\fipped with either or both of the
following sec\frit\b s\bstems:
.
Theft warning s\bstem
. Anti-Theft S\bstem*
(* immobilizer)
The sec\frit\b condition will be shown b\b the sec\frit\b
indicator light.
THEFT WARNING SYSTEM
The theft warning s\bstem provides vis\fal and a\fdio
alarm signals if parts of the vehicle are dist\frbed.
Sec\frit\b indicator light
SIC2045
The sec\frit\b indicator light is located in the meter
panel.
This light operates whenever the ignition switch is in
the “ACC”, “OFF” or “LOCK” position. This is normal.
How to activate the system:
1. Close all windows and p\fsh the ignition switch to the “OFF” position.
The system can be activated even if the
windows are open. 2. Carr\b the Intelligent Ke\b with \bo\f and get o\ft of
the vehicle.
3. Make s\fre the hood is closed. Close and lock all doors with the door handle req\fest switch, LOCK
b\ftton*1on the Intelligent Ke\b (If the door
is locked \fsing the inside lock knob, the s\bstem
will not be activated) or power door lock switch (If
the door is locked \fsing the power door lock
switch with all the doors closed, the s\bstem will
not be activated. To activate the s\bstem, lock the
door \fsing the power door lock switch with an\b of
the doors open, then close all the doors) .
4. Confirm that the sec\frit\b indicator light comes on. The sec\frit\b indicator light sta\bs on for approxi-
matel\b 30 seconds. The vehicle sec\frit\b s\bstem is
now pre-armed. After approximatel\b 30 seconds
the vehicle sec\frit\b s\bstem a\ftomaticall\b shifts
into the armed phase. The sec\frit\b light begins to
flash once ever\b approximatel\b 3 seconds.
If, d\fring this 30-second pre-arm time period, the
door is \fnlocked with the door handle req\fest
switch, the “UNLOCK”
b\ftton*2on the
Intelligent Ke\b, the power door lock switch, or the
ignition switch is p\fshed to the “ACC” or “ON”
position, the s\bstem will not arm.
Even when the driver and/or passengers are in
the vehicle, the system will activate with all
doors locked and ignition switch in the “LOCK”
position. Push the ignition switch to the “ACC” or
“ON” position to turn the system off.
Theft warning system operation:
The warning s\bstem will give the following alarm:
. The hazard indicator blinks and the horn so\fnds
intermittentl\b for approximatel\b 30 seconds.
SECURITY SYSTEM (if equipped)
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
.The alarm automatically turns off after approxi-
mately \f0 seconds. \bowever, the alarm reacti-
vates if the vehicle is tampered with again.
The alarm is activated by:
. Operating the door without using the Intelligent
Key system.
. Opening the hood.
How to stop alarm:
. The alarm will stop by unlocking a door with the
door handle request switch or “UNLOCK”
button*2on the Intelligent Key.
. The alarm will stop when the ignition switch is
pushed to the “ACC” or “ON” position.
If the system does not operate as described
above, have it checked by a RENAULT dealer.
ANTI-T\bEFT SYSTEM
The Anti-Theft System will not allow the engine to start
without the use of the registered Anti-Theft System
key.
If the engine does not start using the registered Anti-
Theft System key, it may be due to interference caused
by:
. Another Anti-Theft System key.
. Automated toll road device.
. Automated payment device.
. Other devices that transmit similar signals.
Start the engine using the following procedure:
1. Remove any items that may be causing the interference away from the Anti-Theft System key.
2. Leave the ignition switch in the “ON” position for approximately 5 seconds.
\f. Turn the ignition switch to the “OFF” or “LOCK” position, and wait approximately 10 seconds. 4. Repeat steps 2 and \f again.
5. Start the engine.
6. Repeat the steps above until all possible inter-
ferences are eliminated.
If this procedure allows the engine to start, RENAULT
recommends placing the registered Anti-Theft System
key separate from other devices to avoid interference.
FCC WARNING:
Changes or modifications not expressly ap-
proved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions; (1) This device may not cause harm-
ful interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation of the
device.
Security indicator light
SIC2045
The security indicator light is located on the meter
panel. It indicates the status of Anti-Theft System.
The light operates whenever the ignition switch is in the “LOCK”, “OFF” or “ACC” position. The security
indicator light indicates that the security systems on
the vehicle are operational.
If Anti-Theft System is malfunctioning, this light will
remain on while the ignition switch is in the “ON”
position.
If the light remains on and/or the engine does
not start, contact a RENAULT dealer for Anti-
Theft System service as soon as possible. Be
sure to bring all Anti-Theft System keys that you
have when visiting a RENAULT dealer for service.
For Right-Hand Drive (RHD) model (for Europe):
If Anti-Theft System is malfunctioning, the security
indicator light will illuminate when the ignition switch is
in the “ON” position. \bowever, if the security indicator
light turns off after 15 minutes, you can start the engine
once. See a RENAULT dealer for Anti-Theft System
service as soon as possible.
Pre-driving checks and adjustments\f-17
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
Push the adjusting lever*2(if equipped\f during the
day for the best rear\bard visibility.
OUTSIDE REARVIEW MIRRORS
WARNING:
. Never touch the outside rearview mirrors
while they are in motion. Doing so may pinch
your fingers or damage the mirror.
. Never drive the vehicle with the outside
rearview mirrors folded. This reduces rear
view visibility and may lead to an accident.
. Objects viewed in the outside mirror are
closer than they appear. (if equipped)
. The picture dimensions and distance in the
outside mirrors are not real.
Adjusting
Remote control type (if equipped) :
SPA2214
The outside rearvie\b mirror remote control operates
\bhen the ignition s\bitch is in the “ACC” or “ON”
position.
1. Move the s\bitch to select the right
*1or left*2mirror.
2. Adjust each mirror until the desired position is achieved
*3.
Lever control type (if equipped) :
SPA2772
Adjust the mirror angles \bith the inside lever until the
desired position is achieved. Manual control type (if equipped) :
SPA2140
Push on the mirror surface directly to adjust it to the
desired position.
Defogging (if equipped\f
The outside rearvie\b mirrors \bill be heated \bhen the
rear \bindo\b defogger s\bitch is operated.
Folding
SPA1732A
Pre-driving checks and adjustments3-21
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3-22Pre-driving checks and adjustments
Remote control type (if equipped) :
The outside rearview mirror remote contro\f operates
when the ignition switch is in the “\bCC” or “ON”
position.
The outside rearview mirrors automatica\f\fy fo\fd when
the outside rearview mirror fo\fding switch is pushed to
the “CLOSE” position
*1. To unfo\fd, push to the
“OPEN” position*2.
CAUTION:
. Continuously performing the fold/unfold
operation of the outside rearview mirror
may cause the switch to stop the operation.
. Do not touch the mirrors while they are
moving. Your hand may be pinched, and the
mirror may malfunction.
. Do not drive with the mirrors stored. You will
be unable to see behind the vehicle.
. If the mirrors were folded or unfolded by
hand, there is a chance that the mirror will
move forward or backward during driving. If
the mirrors were folded or unfolded by hand,
be sure to adjust them again electrically
before driving.
JVC0025X
Automatic folding function with interlocking
door lock (if equipped):
The outside rearview mirrors fo\fd automatica\f\fy by
inter\focking door \fock. The function can be used whi\fe
the switch is in the “\bUTO” position
*2.
. The outside rearview mirrors fo\fd automatica\f\fy
when the door is \focked by the door hand\fe
request switch or the remote key\fess entry system.
. The outside rearview mirrors unfo\fd when the
ignition switch is p\faced in the “\bCC” or “ON”
position.
CAUTION:
When the outside rearview mirror is folded/
unfolded manually, the mirror may fold/unfold
accidentally while driving. Be sure to fold/unfold
the outside rearview mirror by an electrical
operation after folding/unfolding manually.
WARNING:
.When the outside rearview mirror is folded/
unfolded manually, depending on the switch
position, the outside rearview mirror may
start operation by turning the ignition switch
to the “ACC” or“ON” position.
. When unfolding the outside rearview mirror
with the switch being in the “AUTO” position,
the mirror will be unfolded further by turning
the ignition switch to the “ACC” or“ON”
position.
To return its original position, fold the out-
side rearview mirror once.
The outside rearview mirror remote contro\f operates
when the ignition switch is in the "\bCC" or "ON" position.
The outside rearview mirrors automatica\f\fy fo\fd when
the outside rearview mirror fo\fding switch is pushed to
the "CLOSE" position
*1. To unfo\fd, push to the
"\bUTO" position*2.
CAUTION:
Continuously performing the fold/unfold opera-
tion of the outside rearview mirror may cause
the switch to stop the operation.
Manual control type (if equipped) :
SP\b1829
Fo\fd the outside rearview mirror by pushing it toward
the rear of the vehic\fe.
&RQGLWLRQ