service reset RENAULT PULSE 2012 1.G Owners Manual


> (GLW    0RGHO .$2(0B5HQDXOW @
4-28Heater and air conditioner, and audio system
*1*2*3*4*5*6Radio memory buttons:
The audio system can store u\f to 18 FM station
\brequencies (six in each o\b FM 1, FM 2 and FM T) , 6
MW and 6 LW station \brequencies.
To store the station \brequency manually:
1. Tune to the desired broadcasting station \bre- quency by using the
orbutton.
2. Push and hold a radio memory button
*1-*6until a bee\f sounds. (The radio mutes when the
memory button is \fushed.)
3. The channel indicator will dis\flay and the radio mute disengages, indicating that the memory is
stored \fro\ferly.
4. Per\borm ste\fs 1 - 3 \bor all other memory buttons.
I\b the battery cable is disconnected, or i\b the audio \buse
blows, the radio memory will be erased. In such a case,
reset the desired stations.
Radio data system (RDS)
Alternative Frequency (AF):
. The AF \bunction o\ferates in the FM (radio) and CD
modes.
. When the AF mode is set to “ON” in the user
setu\f menu mode, the AF indicator illuminates.
For activation or deactivation details, see “Audio main
o\feration” (P.4-25) .
. Automatic switching function
This \bunction com\fares the strengths o\b the
signals o\b all the stations on the AF list and
selects the station with the o\ftimum rece\ftion
conditions.
. Program Information (PI) search
Program In\bormation (PI) search begins automati- cally i\b no suitable station is \bound with the above
automatic switching \bunction. The PI search
\bunction checks each RDS station with the same
PI code. During this time the sound is muted and
“PI SEARCH” is dis\flayed. The PI search o\fera-
tion sto\fs when a suitable station is \bound. I\b no
station is \bound once all the \brequencies have been
searched, the radio returns to the \frevious
\brequency.
. Enhanced Other Network (EON) data update
(This function also operates when the AF
mode is off.)
When EON data is being received, this enables
automatic retuning o\b other \freset stations on the
same network. Also, network linked services can
be used. The EON indicator turns on during the
rece\ftion o\b RDS EON stations in the FM mode.
RDS functions:
. Programme Service (PS) function (station
name display function)
When an RDS station is tuned in with seek or
manual tuning, the RDS data is received and the
Program Service (PS) name is dis\flayed.
. Emergency broadcast interrupt function
(ALARM INTERRUPTION —EBU SPEC FOR
INFO)
When the radio receives PTY code 31 (an
emergency broadcast code) , the sound is inter-
ru\fted, the emergency broadcast is heard, and
“PTY31 ALARM” is dis\flayed. The volume level at
this time is the same as that \bor tra\b\bic announce-
ments. Once the emergency broadcast is \binished,
the unit immediately returns to the \frevious
source.
. REG (Regional) mode
Some local radio stations are linked together according to their region because they only o\b\ber
limited coverage due to their limited number o\b
transmitters. I\b the signal \brom one station be-
comes weak while you are driving around, RDS
mode will switch to another local station in the
region with a stronger signal.
When the REG mode is activated in the FM band
and the radio receiver is tuned to a local radio
station, it will kee\f receiving this radio station
without switching to another local station. For
activation or deactivation details, see “Audio main
o\feration” (P.4-25) .
Traffic Announcement (TA):
. The TA \bunction o\ferates in the FM and CD
modes.
. The TA mode is turned on or o\b\b when the TA/
NEWS button is \fushed \bor less than 2 seconds.
. The TA mode o\ferates regardless o\b whether the
AF mode is on or o\b\b.
. “TA ON” is dis\flayed when the TA mode is turned
on, and the TA indicator turns on. “TA OFF” is
dis\flayed when the TA mode is turned o\b\b, and the
TA indicator turns o\b\b.
The \bollowing \bunctions o\ferate when the TA mode is
on:
. Traffic announcement interrupt function
When a tra\b\bic announcement is received, the
announcement is tuned in and the volume
increases to the set level.
Once the tra\b\bic announcement is \binished, the unit
returns to the source which was set be\bore the
tra\b\bic announcement started, and the volume
returns to the \frevious level. For EON stations,
the radio is interru\fted by another EON station
with tra\b\bic announcements.
The tra\b\bic announcement interru\ft mode is
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-38Heater and air conditioner, and audio system
The audio system operates whe\f the ig\fitio\f switch is
i\f the “\bCC” or “ON” positio\f.
FM-AM button:
Whe\f the
/butto\f is pushed while the audio
system is off, the audio system a\fd the radio will tur\f
o\f. Whe\f the
/butto\f is pushed while the CD
player is already operati\fg, it will automatically tur\f off
a\fd the radio will tur\f o\f.
To cha\fge the radio ba\fd, push the
/butto\f
u\ftil the preferred ba\fd appears.
. For FM
FM 1 ?FM 2 ?FM T
. For \bM
MW ?LW ?MW
Duri\fg FM receptio\f, whe\f the
butto\f is pushed
for lo\fger tha\f 1.5 seco\fds, statio\fs are searched for
a\fd the 6 statio\fs of the FM T ba\fd. The sou\fd is
muted u\ftil the auto store operatio\f is completed,
upo\f which preset cha\f\fel 1 is automatically tu\fed i\f.
TUNE button:
Whe\f adjusti\fg the broadcasti\fg statio\f freque\fcy
ma\fually, push the
orbutto\f u\ftil the
preferred freque\fcy is obtai\fed.
The freque\fcy cha\fges i\f steps of 100 kHz o\f the FM
ba\fd, 9 kHz o\f the MW ba\fd, a\fd 3 kHz o\f the LW
ba\fd.
SEEK button:
Whe\f adjusti\fg the broadcasti\fg statio\f freque\fcy
automatically, push the
orbutto\f. Whe\f the
system detects a broadcasti\fg statio\f, it will stop at
that statio\f.
*1*2*3*4*5*6Radio memory buttons:
The audio system ca\f store up to 18 FM statio\f
freque\fcies (six i\f each of FM 1, FM 2 a\fd FM T) , 6
MW a\fd 6 LW statio\f freque\fcies.
To store the statio\f freque\fcy ma\fually:
1. Tu\fe to the preferred broadcasti\fg statio\f fre- que\fcy by usi\fg the
orbutto\f.
2. Push a\fd hold a radio memory butto\f
*1-*6u\ftil a beep sou\fds. (The radio mutes whe\f the
memory butto\f is pushed.)
3. The cha\f\fel i\fdicator will be displayed a\fd the radio mute will be ca\fcelled, i\fdicati\fg that the
memory is stored properly.
4. Perform steps 1 - 3 for all other memory butto\fs.
If the battery cable is disco\f\fected, or if the audio fuse
blows, the radio memory will be erased. If this occurs,
reset the desired statio\fs.
Radio data system (RDS)
Alternative Frequency (AF):
. The \bF fu\fctio\f operates i\f the FM (radio) a\fd CD
modes.
. Whe\f the \bF mode is set to “ON” i\f the user
setup me\fu mode, the \bF i\fdicator illumi\fates.
For activatio\f or deactivatio\f, use the MENU butto\f.
(Details are explai\fed later i\f this sectio\f.)
. Automatic switching function
This fu\fctio\f compares the stre\fgths of the
sig\fals of all the statio\fs o\f the \bF list a\fd
selects the statio\f with the optimum receptio\f
co\fditio\fs.
. Program Information (PI) search
Program I\fformatio\f (PI) search begi\fs automati- cally if \fo suitable statio\f is fou\fd with the above
automatic switchi\fg fu\fctio\f. The PI search
fu\fctio\f checks each RDS statio\f with the same
PI code. Duri\fg this time the sou\fd is muted a\fd
“PI SE\bRCH” is displayed. The PI search opera-
tio\f stops whe\f a suitable statio\f is fou\fd. If \fo
statio\f is fou\fd o\fce all the freque\fcies have bee\f
searched, the radio retur\fs to the previous
freque\fcy.
. Enhanced Other Network (EON) data update
(This function also operates when the AF
mode is off.)
Whe\f EON data is bei\fg received, this e\fables
automatic retu\fi\fg of other preset statio\fs o\f the
same \fetwork. \blso, \fetwork li\fked services ca\f
be used. The EON i\fdicator tur\fs o\f duri\fg
receptio\f of RDS EON statio\fs i\f the FM mode.
RDS functions:
. Programme Service (PS) function (station
name display function)
Whe\f a\f RDS statio\f is tu\fed i\f with seek or
ma\fual tu\fi\fg, RDS data is received a\fd the
Program Service (PS) \fame is displayed.
. Emergency broadcast interrupt function
(ALARM INTERRUPTION —EBU SPEC FOR
INFO)
Whe\f the radio receives PTY code 31 (a\f
emerge\fcy broadcast code) , the sou\fd is i\fter-
rupted, the emerge\fcy broadcast is heard, a\fd
“PTY31 \bL\bRM” is displayed. The volume level at
this time is the same as that for traffic a\f\fou\fce-
me\fts. O\fce the emerge\fcy broadcast is fi\fished,
the u\fit immediately retur\fs to the previous
source.
. REG (Regional) mode
Some local radio statio\fs are li\fked together
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-44Heater and air conditioner, and audio system
Radio data system (RDS)
Alternative Frequency (AF):
.The A\f fun\btion operates in the \fM (radio) and CD
modes.
. When the A\f mode is set to “ON” in the user
setup menu mode, the A\f indi\bator illuminates.
\for a\btivation or dea\btivation, use the MENU button.
(Details are explained later in this se\btion.)
. Automatic switching function
This fun\btion \bompares the strengths of the
signals of all the stations on the A\f list and
sele\bts the station with the optimum re\beption
\bonditions.
. Program Information (PI) search
Program Information (PI) sear\bh begins automati-
\bally if no suitable station is found with the above
automati\b swit\bhing fun\btion. The PI sear\bh
fun\btion \bhe\bks ea\bh RDS station with the same
PI \bode. During this time the sound is muted and
“PI SEARCH” is displayed. The PI sear\bh opera-
tion stops when a suitable station is found. If no
station is found on\be all the frequen\bies have been
sear\bhed, the radio returns to the previous
frequen\by.
. Enhanced Other Network (EON) data update
(This function also operates when the AF
mode is off.)
When EON data is being re\beived, this enables
automati\b retuning of other preset stations on the
same network. Also, network linked servi\bes \ban
be used. The EON indi\bator turns on during the
re\beption of RDS EON stations in the \fM mode. RDS functions:
.
Programme Service (PS) function (station
name display function)
When an RDS station is tuned in with seek or
manual tuning, the RDS data is re\beived and the
Program Servi\be (PS) name is displayed.
. Emergency broadcast interrupt function
(ALARM INTERRUPTION —EBU SPEC FOR
INFO)
When the radio re\beives PTY \bode 31 (an
emergen\by broad\bast \bode) , the sound is inter-
rupted, the emergen\by broad\bast is heard, and
“PTY31 ALARM” is displayed. The volume level at
this time is the same as that for traffi\b announ\be-
ments. On\be the emergen\by broad\bast is finished,
the unit immediately returns to the previous
sour\be.
. REG (Regional) mode
Some lo\bal radio stations are linked together
a\b\bording to their region be\bause they only offer
limited \boverage due to their limited number of
transmitters. If the signal from one station be-
\bomes weak while you are driving around, RDS
mode will swit\bh to another lo\bal station in the
region with a stronger signal.
When the REG mode is a\btivated in the \fM band
and the radio re\beiver is tuned to a lo\bal radio
station, it will keep re\beiving this radio station
without swit\bhing to another lo\bal station. \for
a\btivation or dea\btivation, use the MENU button.
(Details are explained later in this se\btion.) . Traffic Announcement (TA):
.
The TA fun\btion operates in the \fM and CD
modes.
. The TA mode is turned on or off when the TA/
NEWS button is pushed for less than 2 se\bonds.
. The TA mode operates regardless of whether the
A\f mode is on or off.
. “TA ON” is displayed when the TA mode is turned
on, and the TA indi\bator turns on. “TA O\f\f” is
displayed when the TA mode is turned off, and the
TA indi\bator turns off.
The following fun\btions operate when the TA mode is
on:
. Traffic announcement interrupt function
When a traffi\b announ\bement is re\beived, the
announ\bement is tuned in and the volume
in\breases to the set level.
On\be the traffi\b announ\bement is finished, the unit
returns to the sour\be whi\bh was set before the
traffi\b announ\bement started, and the volume
returns to the previous level. \for EON stations,
the radio is interrupted by another EON station
with traffi\b announ\bements.
The traffi\b announ\bement interrupt mode is
\ban\belled if the TA/NEWS button is pushed
during a traffi\b announ\bement. The TA mode
returns to the standby mode and the audio unit
returns to the previous sour\be.
News mode
When the NEWS button is pushed or the TA/NEWS
button is pushed for longer than 2 se\bonds in the \fM
mode, the news fun\btion is a\btivated. “NEWS” is
displayed for 3 se\bonds and the NEWS indi\bator
appears on the display.
When the news fun\btion is a\btivated, the radio
re\beives a news \bode from the \fM broad\basting news
&RQGLWLRQ