warning RENAULT SCENIC 2008 J84 / 2.G Parking Distance Control User Guide

PARKING DISTANCE CONTROL
Fault finding - Customer complaints
87F
87F - 42V4 MR-372-J84-87F000$858_eng.mif
Vdiag No: 04-08PARKING DISTANCE CONTROL
Fault finding - Customer complaints
NOTESOnly consult this customer complaint after a complete check with the diagnostic
tool.
NO DIALOGUE WITH THE COMPUTER ALP1
NO BUZZERALP2
WARNING SOUND EMITTED CONTINUOUSLY
(NO OBSTACLE DETECTED)ALP3
MR-372-J84-87F000$858_eng.mif

PARKING DISTANCE CONTROL
Fault finding - Fault Finding Chart
87F
87F - 44V4 MR-372-J84-87F000$924_eng.mif
Vdiag No: 04-08
ALP2 No buzzer
NOTESOnly investigate this customer complaint after a full check using the diagnostic tool
(no faults must be present or stored).
Using the diagnostic tool Main Data screen, check
that the parking distance control system is on.
The status ET003 Parking distance control
function must be READY (and the red warning light
on the parking distance control switch must be off).
Is status ET003 READY?
YES
Is status ET001 "YES", with reverse gear
engaged?
YES
Using the diagnostic tool configuration readings
screen, check that the buzzer volume has not been
switched off (LC001 Buzzer volume should not be
ZERO)
Is the LC001 function ZERO
NO
NOTurn on the parking distance control by
pressing the switch for 1 or 3 seconds
(the red light should go out).
Note:
For more information concerning the
activation of the system, consult the
interpretation of status ET003 Parking
distance control.
NOApply the interpretation procedure for
status ET001
YESReconfigure the buzzer volume using the
diagnostic tool (command CF001 Buzzer
volume).
AFTER REPAIRCheck that the system is operating correctly.
AAP_V04_ALP2/AAP_V08_ALP2