ABS RENAULT SCENIC 2011 J95 / 3.G Engine And Peripherals EDC16 Owners Manual

13B-363
MR-372-J84-13B200$936.mif
V13
DIESEL INJECTION
Fault finding – Tests
EDC16
Program No: C1
Vdiag No: 18, 1C, 20,
50, 58, 5C
13B
Shown above is the pipe (Mot. 1760) with the end piece (2) on the right and the plug (4) on the left.
Remove the clip and the plug from the end piece (2) of the pipe of tool Mot. 1760, leave the plug (4) in place.
Connect the pipe of Mot. 1760 to the rail overpressure valve (without removing the clip on the overpressure valve):
– press on the clip (1) of the overpressure valve,
– insert the end piece (2) in the overpressure valve fuel return opening.
– do not forget to fit the end piece plug (2) to the overpressure valve fuel return opening using the clip supplied.
Remove the plug (4).
Insert the end of the pipe in the measuring cylinder of the tool Mot. 1760, the measuring cylinder is retrieved from
the tool Mot.1711.
Measure the return flow (see the procedure in part 1 of this test).
Part 3: Removing the tool:
TEST 12
CONTINUED 3
IMPORTANT
Use a cleaning cloth (part number 77 11 211 707) to absorb fuel run-off.