ESP RENAULT SCENIC 2011 J95 / 3.G Engine And Peripherals EDC16C36 Workshop Manual

13B-400
AFTER REPAIRCarry out a road test followed by a complete check with the diagnostic tool.
V9 MR-372-J84-13B450$190.mif
DIESEL INJECTION
Fault finding – Fault Finding Chart13B
ALP11
CONTINUED 1
Recognition of parameters corresponding to the start of successful regenerations.
Make adjustments to align the parameter groups.
Group 1 Stored regeneration start no. 1 to 10
and
Group 2 Stored regeneration failure no. 1 to 10
For each group 1 parameter, if there is no parameter in group 2 in the next 30 miles (50 km), note that this means
a successful regeneration (R). If there is one, this means a failure (E).
Note group 1 here:Note group 2 here: Type of regeneration:
PR816: ____ ET742 ____
PR817: ____ ET743 ____
PR818: ____ ET744 ____
PR819: ____ ET745 ____
PR820: ____ ET746 ____
PR821: ____ ET747 ____
PR822: ____ ET748 ____
PR823: ____ ET749 ____
PR824: ____ ET750 ____
PR825: ____ ET751 ____PR794: __
PR795: __
PR796: __
PR797: __
PR798: __
PR799: __
PR800: __
PR801: __
PR802: __
PR803: __PR816:
PR817:
PR818:
PR819:
PR820:
PR821:
PR822:
PR823:
PR824:
PR825:R
R
R
R
R
R
R
R
R
RE
E
E
E
E
E
E
E
E
E
For each successful regeneration (R), look in group 1 for the next parameter
in order of mileage which has a status of STATUS4. is there at least one
status?
(To be calculated for each successful regeneration)
Successful regeneration parameter= ________
Next parameter at STATUS 4= ________
Interval = Next parameter at STATUS 4 – PR412
= ________ – ________
= ________
A
NOOutput
3
YES
C
EDC16 C36
Program No.: 91
Vdiag No.: 48, 58