bulb RENAULT SCENIC 2011 J95 / 3.G Engine And Peripherals Siemens Injection Workshop Manual

13B-13
MR-372-J84-13B050$195.mif
V17
13B
DIESEL INJECTION
Fault finding – Function
SYSTEM FLOWCHART
The high pressure injection system is designed to deliver a precise quantity of diesel fuel to the engine at a set
moment.
The Siemens VDO piezo Common Rail system used on the K9K Step 2 engine is a second generation Common Rail
injection system. Fuel pressure in the rail can reach a maximum of 1650 bar.
The Siemens VDO piezo Common Rail system uses injectors which are controlled by piezoelectric actuators.
The fuel is pressurised by means of a high pressure pump then sent to a rail which supplies the four injectors.
The system includes two subsystems, which have different fuel pressure levels:
●the low pressure system which includes the tank, diesel fuel filter, internal fuel transfer pump and injector
return pipes,
●the high pressure system which includes the high pressure pump, rail, injectors and high pressure pipes.
There are a number of sensors and regulating actuators for controlling and monitoring the entire system.
It is fitted with a 112- track (or 128- track for Kangoo II) SIEMENS computer (SID 301 and SID 304).
The system comprises:
– a priming bulb,
– a diesel filter,
– a high pressure pump (HPP) with a fuel pressure solenoid valve (PCV), a fuel flow solenoid valve (VCV) and an
internal fuel transfer pump (ITP, low pressure pump),
– an injector rail,
– a rail pressure sensor,
– four piezoelectric injectors,
– a fuel temperature sensor,
– a coolant temperature sensor,
– a camshaft sensor,
– a TDC sensor,
– a turbocharger pressure sensor,
– an exhaust gas recirculation solenoid valve with integrated position sensor (EGR),
– an accelerator pedal potentiometer,
– an atmospheric pressure sensor integrated into the injection computer,
– an air mass flowmeter with integrated air temperature sensor,
– an air damper valve (Vdiag 44, 45, 48, 49 and 4D only),
– a temperature sensor upstream of the turbine,
– an antipollution system:
●a temperature sensor upstream of the particle filter (Vdiag 45, 49, 4D only),
●a temperature sensor downstream of the particle filter (Vdiag 45, 49, 4D only),
●a particle filter differential pressure sensor (Vdiag 45, 49, 4D only),
●a particle filter injector (Vdiag 45, 49, 4D only),
●a particle filter (Vdiag 45, 49, 4D only),
– a temperature sensor downstream of the catalytic converter,
– an electric fuel pump,
– an electric coolant pump (Vdiag 45, 49, 4D only),
– four heating elements and their control unit (Vdiag 45, 49, 4D only),
– four heater plugs,
– a water in the fuel detection sensor (optional).
MR-372-J84-13B050$195.mif
Siemens Injection
SID301 and 304
Vdiag No.: 44-45-48-49-4D-4C
Program No.: B1 and B2