RENAULT TWINGO 2009 2.G Electrical Equipment - Radio R2-08 Repair Manual

86A-61V1 MR-413-X44-86A150$130.mif
RADIO
Fault finding – Conformity check86A
R2-08
Vdiag No.: 64
FUNCTION: MULTIMEDIA
SUB-FUNCTION: AUDIO
NOTESOnly carry out this conformity check after a complete check with the diagnostic tool.
The values shown in this conformity check are given as a guide.
Application condition: engine off, ignition on.
FunctionParameter or status checked
or actionDisplay and notes Fault finding
Audio testAC004:Test right front
speaker line
This command is used to
successively activate
each speaker.In the event of an
inconsistency, consult the
interpretation of fault DF001
Front right-hand speaker.
AC005:Test left front
speaker lineIn the event of an
inconsistency, consult the
interpretation of fault DF002
Front left-hand speaker.
AC006:Test right rear
speaker lineIn the event of an
inconsistency, consult the
interpretation of fault DF003
Rear right-hand speaker.
AC007:Test left rear
speaker lineIn the event of an
inconsistency, consult the
interpretation of fault DF004
Rear left-hand speaker.
Microphone testAC010:Microphone testThis command is for
testing microphone
operation.
NOTE:
Test in a quiet place.
Command AC010 is
inactive if the auxiliary
source is selected.
Example: presence of
a USB key.In the event of an
inconsistency, consult the
interpretation of fault DF056
Microphone.

86A-62V1 MR-413-X44-86A150$130.mif
RADIO
Fault finding – Conformity check86A
R2-08
Vdiag No.: 64
FUNCTION: MULTIMEDIA
SUB-FUNCTION: USER SELECTION
NOTESOnly carry out this conformity check after a complete check with the diagnostic tool.
The values shown in this conformity check are given as a guide.
Application condition: engine off, ignition on.
FunctionParameter or status checked
or actionDisplay and notes Fault finding
Front panel buttonET002:Mode buttonPRESSED RELEASED
In the event of an
inconsistency, consult the
interpretation of fault DF055
Button jammed. ET062:Text info buttonPRESSED RELEASED
ET040:"SET" buttonPRESSED RELEASED
ET039:"TEL" buttonPRESSED RELEASED
ET010:Radio preset
button 1PRESSED RELEASED
ET011:Radio preset
button 2PRESSED RELEASED
ET012:Radio preset
button 3PRESSED RELEASED

86A-63V1 MR-413-X44-86A150$130.mif
RADIO
Fault finding – Conformity check86A
R2-08
Vdiag No.: 64
FUNCTION: MULTIMEDIA
SUB-FUNCTION: USER SELECTION (continued)
NOTESOnly carry out this conformity check after a complete check with the diagnostic tool.
The values shown in this conformity check are given as a guide.
Application condition: engine off, ignition on.
FunctionParameter or status checked
or actionDisplay and notes Fault finding
Front panel buttonET013:Radio preset
button 4PRESSED RELEASED
In the event of an
inconsistency, consult the
interpretation of fault DF055
Button jammed. ET014:Radio preset
button 5PRESSED RELEASED
ET015:Radio preset
button 6PRESSED RELEASED
ET003:Right directional
buttonPRESSED RELEASED
ET004:Left directional
buttonPRESSED RELEASED
ET035:Fast forward
buttonPRESSED RELEASED
ET034:Rewind buttonPRESSED RELEASED
ET036:Wheel press on/
offPRESSED RELEASED
ET043:Wheel left turnLEFT RELEASED

86A-64V1 MR-413-X44-86A150$130.mif
RADIO
Fault finding – Conformity check86A
R2-08
Vdiag No.: 64
FUNCTION: MULTIMEDIA
SUB-FUNCTION: USER SELECTION (continued)
NOTESOnly carry out this conformity check after a complete check with the diagnostic tool.
The values shown in this conformity check are given as a guide.
Application condition: engine off, ignition on.
FunctionParameter or status
checked or actionDisplay and notes Fault finding
Front panel
button
(continued)ET044:Wheel right turnRIGHT RELEASED
In the event of an inconsistency,
consult the interpretation of fault
DF055 Button jammed. ET060:Centre wheel
pressPRESSED RELEASED
ET059:Central wheel
right turnRIGHT RELEASED
ET058:Central wheel
left turnLEFT RELEASED
ET009:CD eject buttonPRESSED RELEASED
ET063:"MEM" buttonPRESSED RELEASED
ET064:RADIO/CD
buttonPRESSED RELEASED

86A-65V1 MR-413-X44-86A150$130.mif
RADIO
Fault finding – Conformity check86A
R2-08
Vdiag No.: 64
FUNCTION: MULTIMEDIA
SUB-FUNCTION: USER SELECTION (continued)
NOTESOnly carry out this conformity check after a complete check with the diagnostic tool.
The values shown in this conformity check are given as a guide.
Application condition: engine off, ignition on.
FunctionParameter or status
checked or actionDisplay and notes Fault finding
RadioAC013CD ejectionThis command is used for
testing CD ejection from
the CD player.In the event of an inconsistency,
contact the Techline.

86A-66V1 MR-413-X44-86A150$140.mif
86A
R2-08
Vdiag No.: 64
Tool status Diagnostic tool title
ET001Presence of another device
ET002Mode button
ET003Right directional button
ET004Left directional button
ET009CD eject button
ET010Radio preset button 1
ET011Radio preset button 2
ET012Radio preset button 3
ET013Radio preset button 4
ET014Radio preset button 5
ET015Radio preset button 6
ET034Rewind button
ET035Fast forward button
ET036Wheel press on/off
ET039TEL button
ET040SET button
ET043Wheel left turn
ET044Wheel right turn
ET057Activation signal
ET058Central wheel left turn
ET059Central wheel right turn
ET060Centre wheel press
ET062Text info button
ET063MEM button
ET064RADIO/CD button
ET065Activation request
RADIO
Fault finding – Status summary table

86A-67V1 MR-413-X44-86A150$150.mif
86A
R2-08
Vdiag No.: 64
Tool Parameter Diagnostic tool title
PR007FM1 radio field intensity
RADIO
Fault finding – Parameter summary table

86A-68
AFTER REPAIRRepeat the conformity check from the start.
V1 MR-413-X44-86A150$160.mif
86A
R2-08
Vdiag No.: 64
PR007FM1 RADIO FIELD INTENSITY
NOTESThe values shown in this conformity check are given as a guide.
Test conditions: Engine off, ignition on and radio on.
Perform the conformity check outside, in an area with good radio reception and
without obstacles.
Conformity check:
Monitor the PR007 value of the diagnostic tool data display.
Display of frequency received for the radio station currently set.
Radio field intensity parameterRadio reception level
(data display)
Outdoor testUnit: dBµV
Data interpretation:
Radio reception value Status
X > 18 dBµVCorrect radio reception
14 dBµV < X < 18 dBµVCorrect sound quality
RDS decoding (for example: display
of station names) correct
Automatic synchronisation / Presence
in the radio list
not satisfactory
10 dBµV < X < 14 dBµVCorrect sound quality
RDS decoding (for example: display
of station names) not satisfactory
Automatic synchronisation / Presence
in the radio list
not satisfactory
X > 10 dBµVRadio reception not satisfactory
If the fault is still present, contact the Techline.
R208_V64_PR007
RADIO
Fault finding – Interpretation of parameters

86A-69V1 MR-413-X44-86A150$170.mif
86A
R2-08
Vdiag No.: 64
Tool
commandDiagnostic tool title Description
RZ003:Fault memoryThis command is used for clearing the stored
faults from the computer.
AC004:Test right front speaker line
These commands are used to carry out
a listening test for each speaker.
NOTE:
These commands are not usable if the
anti- theft code is not entered. AC005:Front left-hand speaker lines test
AC006:Rear right-hand speaker lines test
AC007:Test left rear speaker line
AC010:Microphone testThis command is for testing microphone
operation.
NOTE:
Command AC010 is inactive if the auxiliary
source is selected.
Start by setting the radio to CD or radio
mode and run command AC010.
This command is not usable if the anti-theft
code is not entered.
AC013:CD ejectionThis command is used for testing CD ejection
from the CD player.
Set the radio to CD mode and run command
AC013.
SC002:Computer configuration See Configuration and Programming.
RADIO
Fault finding – Command summary table

86A-70V1 MR-413-X44-86A150$180.mif
86A
R2-08
Vdiag No.: 64
NOTESOnly refer to the customer complaints after performing a complete check using
the diagnostic tool.
NO DIALOGUE WITH THE COMPUTER ALP1
THE RADIO BEEPS EVERY 2 SECONDS ALP2
THE RADIO DOES NOT OPERATE WHEN THE ON BUTTON IS PRESSED ALP3
RADIO IS SWITCHED ON, BUT THE DISPLAY DOES NOT WORK ALP4
THE RADIO CONTROL SATELLITE DOES NOT OPERATE OR OPERATES POORLY ALP5
RADIO RECEPTION FAULT ALP6
THE VOLUME DOES NOT INCREASE WITH THE VEHICLE SPEED. ALP7
BACKLIGHTING DOES NOT CHANGE WHEN THE VEHICLE LIGHTS ARE
SWITCHED ONALP8
THE RADIO DOES NOT PLAY THE CD IN ORDER OR SKIPS SONGS ALP9
SOUND FAULT FOR A SPEAKER OR TWEETER (REGARDLESS OF SOURCE) ALP10
THE RADIO AND/OR THE DISPLAY REMAINS LIT FOR 1 MINUTE AFTER LOCKING THE
VEHICLE (ON NEW TWINGO ONLY)ALP11
THE CD DOES NOT EJECT ALP12
A RADIO BUTTON(S) NO LONGER OPERATES OR FUNCTIONS POORLY ALP 13
POOR SOUND (REGARDLESS OF THE SOURCE) ALP14
TELEPHONE COMMUNICATION IS POOR ALP15
VOICE RECOGNITION DOES NOT WORK OR DOES NOT WORK PROPERLY ALP16
PROBLEM PAIRING MY TELEPHONE TO THE RADIO ALP17
FAULT WHEN USING THE MOBILE CONNECTIVITY TERMINAL ALP18
RADIO
Fault finding – Customer complaints