fuse RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual

Page 113 of 281

33A-15
REAR AXLE COMPONENTS
Rear brake lining: Removal - Refitting
33A
aRemove the leading shoe:
-the spring (10) ,
-the adjustment lever (11) .
REFITTING
I - REFITTING PREPARATIONS OPERATION
aRemove any dust from the drums and the flanges
using the cleaning station.
aLightly grease the support linkage thread.
II - REFITTING OPERATION FOR PART
CONCERNED
aRefit the leading shoe:
-the adjustment lever,
-the spring.
aConnect the parking brake cable to the parking
brake lever.
aRefit:
-the trailing shoe.
86559
117348
Note:
The brake mechanism components are different
on the left and r ight-hand sides, so it is important
not to confuse them.
Note:
On the left-hand brake: the bolt thread has a
right-hand thread.
On the right-hand brake: the bolt has a left-hand
thread.

Page 176 of 281

36B-1
POWER ASSISTED STEERING
Power-assisted steering computer: Removal - Refitting
LEFT-HAND DRIVE
36B
REMOVAL
I - REMOVAL PREPARATION OPERATION
aDisconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
aUnclip:
-the fuse access flap (1) ,
-the dashboard lower trim.aDisconnect the various connectors.
aRemove:
-the steering wheel lower cover bolt,
-the steering wheel lower cover (2) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aUnclip the locking clips of the connectors of the pow-
er-assisted steering computer.
aDisconnect the connectors (3) of the power-assisted
steering computer. Equipment required
Diagnostic tool
119506
119711
119858

Page 177 of 281

36B-2
POWER ASSISTED STEERING
Power-assisted steering computer: Removal - Refitting
LEFT-HAND DRIVE
36B
aRemove:
-the power-assisted steering computer bolts (4) ,
-the power-assisted steering computer,
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit the power-assisted steering computer.
aConnect the power-assisted steering computer con-
nectors.
aFasten the locking clips of the connectors of the
power-assisted steering computer.
II - FINAL OPERATION.
aRefit the steering wheel lower cover.
aConnect the various connectors.
aClip:
-the dashboard lower trim,
-the fuse access flap.
aConnect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
aWhen replacing the electric power-assisted steering
computer, perform the necessary operations using
the Diagnostic tool (see Fault finding - Replace-
ment of components) (36B, Power-assisted steer-
ing).
119882