light Seat Alhambra 2019 User Guide

Emergencies
Rear light, left Rear light, right
13. Carefully insert the tail light unit into the open-
ing in the bodywork . T
o do this, insert the up-
per rear light unit guide into the attachment ring.
14. Tighten the white attachment screw using the
screw

driver from the vehicle tool kit.
15. Ensure that the tail light unit has been correct-
ly fitted and is firmly secur ed.
16. R

eplace the cap

Fuses and bulbs

Fixed number
plat e light Bolt
ed number
plate light
7. Plug the connect
or in-
to the bulb hol der

.Press on the attach-
ment tabs. The bulb
hol
der must be firmly
att

ached to the num-
ber plate light.
8. Insert the number plate light carefully into the
opening on the bumper. Ensur e that the number
pl

ate light is in the correct position.
9. Insert the number
plat
e light int

o the
bumper until it audibly
clicks into place. Tighten the attach-
ment screws f
or the
number plate light us-
ing the screwdriver. 101

Lights and visibility
driver door and the front passenger door are
not opened.
Anti-trap function of the panoramic
sliding sunr oof and the sun blindThe anti-trap function reduces the risk of in-
jury when opening and closing the panor
am-
ic sliding sunr
oof and sun blind

Operation

It lights up
Main beam on or flasher on

Lights and visibility
lights also work when the ignition is switch-
ed off

Operation
Automatic switch-
ing on
Automatic switch-
ing off
The photo sensor de-
tects darkness
, for exam-
ple, when driving through
a tunnel. When adequate lighting
is detected.
The r
ain sensor detects
rain and activ at

es the
windscreen wipers. When the windscreen
wipers have been inac-
tive f
or a few minutes. WARNING
If the road is not well lit and other road
users cannot see the vehicl e w

ell enough
or at all, accidents may occur.

Lights and visibility
headlight adjustment (automatic lights al-
so), for e
x
ample, if additional headlight are
fitted. Note
Main beam and flashed headlights can be
t urned on and off manually at any time with
the t urn signal and main beam l

ever

Operation
When being towed with the hazard warning
lights on, a change in dir ection or tr
affic l
ane
can be indicated as usual using the turn sig-
nal lever. The hazard lights will be interrupted
temporarily.
If your vehicle breaks down:
Park the vehicle a safe distance from
traffic and on suitable ground

Lights and visibility
Note
Use of the Tourist light option and the
adhesives on the headlights is only all o
wed
if they are to be used for a short period of
time. To modify the direction of the head-
lights permanently, please take the vehicle
to a specialised workshop. SEAT recom-
mends visiting a technical service centre. Headlight range control, lighting of
the instrument panel and control
sFig. 145
On the side of the steering wheel: in-
strument and s wit
ch lighting contr

ol 1 and
headlight r ange contr ol 2 1
Instrument and switch lighting
When the headlights ar e s
wit

ched on, the
brightness of the instruments and switch
lighting can be regulated by turning the
switch

Operation
Note
The reading lights go out when the vehicle
is lock ed, or a f
ew minutes after the key is
removed from the ignition. This prevents
the vehicle