Seat Leon Sportstourer 2020 Owner's manual

Start and driving

Driving
To ensure that the drive system can be
s wit
ched on, even in very low outside temper-
atures, SEAT recommends parking the vehicle
in a place protected from the cold. Note
A click is heard when the drive system is
t urned on. This is compl

etely normal and
does not mean there is a problem. Starting the engine

Start and driving
Note

Driving
The engine can only be started using a genu-
ine SEAT k ey with its corr
ect code.Note
A perfect operation of the vehicle is ensur-
ed if genuine SEAT k eys ar

e used.Emergency starting function
Fig. 162
In the centre console: emergency
st art. If no valid key is detected inside the vehicle,
an emer
gency st

art-up will be required. The
relevant message will appear in the dash
panel display. This may happen when, for ex-
ample, the vehicle key battery is very low:

Start and driving
When the ignition is on/off, the engine start
butt on fl
ashes. With the ignition is switched
off, the start button goes off after a few sec-
onds.
With the engine running, the start button light
stays on, indicating that the engine is running.
The time elapsed between the moment the
user starts the engine with the start button
and the lighting changes from flashing to
fixed will depend on specific engine size
characteristics. When the start button is used
to stop the engine, the button starts flashing
again.
In vehicles with the Start-Stop system, the
“My Beat” function also offers additional in-
formation:

Driving
Instructions for the driver on the instru-
ment panel displ ay
Start-Stop system deactivated. Start
the engine manually

Start and driving

Driving
remains stopped, the engine will not stop if
the br
ak
e pedal is slightly pressed, in traffic
jams with frequent stopping and starting
for example. As soon as strong pressure is
applied to the brake pedal, the engine will
stop.

Start and driving

Driving
level. The rest is kept until the end of the
journey.
The Int elligent Hybrid
App allows the user to
save electrical energy until reaching home
(charging point) with just “one click”. If this
option is not selected, the maximum amount
of electrical energy will be consumed until
the selected destination is reached. If the
user has no active route, the function will offer
the activation of a predictive route and BMA
mode from the widget itself with just one
click.
Show the active operating mode
The operating mode active at any given time
is displayed on the instrument cluster display,
e.g. B. WARNING
Switching to a different operating mode
whil e driving can distr

act you from traffic
conditions and cause accidents. Note
Information about the operating mode that
is curr ently activ

e is displayed on the in-
strument cluster display, along with the
charge level of the high-voltage battery. Troubleshooting
@
The E-MODE oper
ating mode is not
av
ailable
The indicator lamp lights up in white.
The E-MODE operating mode N (driving in
electric mode) cannot be used temporarily
because one or more conditions are not met.