drain bolt SKODA OCTAVIA 1997 1.G / (1U) 1.8 92kw Engine Workshop Manual

Downloaded from www.Manualslib.com manuals search engine Cooling System19
Edition 11.96


Removing and installing radiator
Notes:
Always replace seals and gaskets.
Lifting vehicle with lift platform page 10-1,
Removing and installing engine.
Special tools, testers and aids required Torque wrench 5...50 Nm (e.g. V.A.G 1331)
Wire
Removing
- Drain coolant page 19-3.
- Unplug connector of thermostatic switch
(F18) -1- and separate plug connections -2- and -3- at the fan shroud (press locking cat- ches).
- Detach coolant hoses at connection fitting of the radiator (pull off retaining clip).
Models with air conditioning
- Unscrew the 4 bolts -arrows- attaching the
condenser.
Important!
The refrigerant circuit of the air conditioning sys-tem must not be opened.
Note: In order to avoid damage to the condenser andalso to the refrigerant pipes/hoses, ensure that
the pipes and hoses are not over-tensioned,kinked or bent.

Downloaded from www.Manualslib.com manuals search engine Cooling System19
Edition 11.96


Models with air conditioning
- Pull out radiator slightly together with conden-
ser.
- Detach clip -arrow- for attaching refrigerant
pipe.
Continued for all models
- Remove fan shroud (4 bolts).
Note: When removing and installing the fan shroud,ensure that the radiator ribs are not damaged.
- Carefully take out the radiator downward. Installing Installation is performed in the reverse order; pay attention to the following points:
- Tighten thermostatic switch -1- to
35 Nm.
- Fit on the brackets -2- and -3- at the radiator, as illustrated.
- Tighten the bolts for attaching the fan shroud and radiator mounts to
10 Nm.
- On models with air conditioning, tighten the bolts for attaching condenser and bracketsfor refrigerant pipes to10 Nm.
- Replace O-rings in the connection fittings of the coolant hoses.
- Insert drain plug for coolant.
- Fill system with coolant ⇒ page 19-3.
- Install headlights: ⇒ Electrical System; Repair Group 94; Re- moving and installing headlights
- Electrical connections and routing: ⇒ Current Flow Diagrams, Electrical Fault Finding and Fitting Locations binder