buttons SKODA SUPERB 2009 2.G / (B6/3T) Swing Car Radio Manual

General information
2General informationEquipment overview
Control button − Switching radio on and off − Volume control (rotate) Menu control button - to call up the menu
of the parameter setting for radio or
CD player Button to activate the play function of audio sources Button to activate the radio modeButtons − fast station finding in radio mode − Select the track in the CD mode, fast forward/backward search in the CD mode Button − Display of radio text information − Display of additional information of MP3-CDs Button for adjusting the soundButton automatically stores the station Button to activate the reception of traffic reports CD caseCD - eject button Station keys − store and select the RDS station − CD selection − Enter code
Explanation of symbols * items of equipment which are marked in such a way are only installed as standard on certain models or are su
pplied as special equipment.
 End of a section.
 The section is continued on the next page.
Note
This Owner's Manual describes the range of fu
nctions at the time of going to press.
The illustrations can differ in minor
details from the version of your unit.
Important informationWarrantyThe equipment warranty terms and conditions also apply for new vehicles. After the expiration of the warranty, a piec
e of equipment in need of repair will be
replaced with a reconditioned, original item with spare part warranty. It is, however, a precondition that the housing has
not been damaged and no unauthorised
attempts have been made
to carry out repairs.
Note
Damage within the meaning of the warranty must not be the result of improper handling of the system or from unprofession
al repair attempts. It is also essential
that there is no external damage.Device operationThe unit should only be used, if the traffic situation permits it. The volume settings must be selected in
such a way that audible signals from the
outside, e.g. a Martins horn from utility
vehicles (police cars,
ambulances and fire
brigade), can be heard at all times.
A1A2A3
MEDIA
A4
RADIO
A5


A6
INFO
A7

A8
AS
A9
TP
A10A11A12sag.9.book Page 2 Wednesday, March 11, 2009 3:20 PM

General information
4Audio settings– Press the button and then the station key and select the desired
parameter.
– Set the desired value by turning the menu control button .You can select between the following parameters:•
BASS
- bass setting;
•
MIDDLE
- midtone setting;
•
TREBLE
- treble setting;
•
BALANCE
- setting of the volume ratio between the left and right side;
•
FA D E R
- setting of the volume ratio between the front and the rear;
•
ON VOL

•
PDC VOL
•
GALA
•
LO U D
- in case of low volume level, this
function reinforces the range of bass
and treble frequencies. ON VOL Your radio stores the last volume set before switching off. If the value is higher, the volume is reduced to the value of the parameter
ON VOL
after switching on the
radio again. GALA Your radio increases automatically its volu
me with the increasing vehicle speed. A
higher setting value results in a stronger volume increase. PDC VOL* If your vehicle is
equipped with “parking aid”,
the volume is automatically
decreased to a pre-defined value, wh
en the “parking aid” is active.
Setting the special functions– Press the menu control button for a long period of time. – Select the individual functions of the menu with the help of the station
keys.
– Set the desired value using the menu control button or with the
help of the station keys.
AUX* Switching on or off the function
s of the external audio source.
Setting of the input sensitivity
AUX LEV
:
•
AUX LEV 1
- high level, used in particular for notebooks;
•
AUX LEV 2
- middle level, used for cassettes or CD player;
•
AUX LEV 3
- low level, used for MP3 player;
PHONE* If your vehicle is
equipped with a ha
ndsfree system, you can switch on or off the
monophone play function of the mobile
phone calls via the loudspeakers of the
vehicle. BEEP Switching on or off the tone signal when storing the radio stations. ILLUM Switch on (value
2) or switch off (value
1) the rear lighting of the control buttons.
AF The function alternative frequency (AF) ensures that the best receivable frequency of the selected station is automatically an
d precisely set. The replay of the broad-
cast can be muted briefly during the search process according to the best receiv-able frequency. If no alternative frequenc
y of the set station can be found and the
station no longer offers a satisfactory qu
ality, then please select another station.

A12
A2
A2
A2
sag.9.book Page 4 Wednesday, March 11, 2009 3:20 PM

CD player
7
CD playerUsing the systemInserting the CD– Press the button , in order to select the audio source:
CD

(internal CD drive),
CDC
(external CD changer),
AUX
(external input)
and
BT-AUDIO
(wireless transfer of MP3 data from the telephone
preinstallation).
– Carefully insert a CD into the CD case until it is automatically
drawn in. The play function begins automatically.
Operating the CD playerSelect track – Briefly press the rocker switch
or during the play function of
the CD or turn the menu control button , in order to select the previous and/or the next title.
– Press the button or longer for
fast replay of the track (reverse
or forward). The play function is continued after releasing the button.
Function SCAN – Briefly press the menu control button , in order to scroll through
the CD. The first 10 seconds of each title are played.
– In order to call up the original replayed title, press the station key
CANCEL
.
– End the automatic finding
by pressing the button
OK
. The already
replayed title remains selected.
– If you wish to select another title, press the button
SKIP
.
End the play function of the CD – In order to end the play function of
the CD and to activate the radio,
press the button .
Ejecting CD – Press the button , the Cd is ejected.
Note
•
If the ejected CD is not removed, it is drawn in again for safety reasons.
•
If the radio is functioning in the TP mode before changing to the CD mode, the
play function of the CD is interrupted duri
ng the traffic reports and the unit switches
over to the radio mode. After the traffic reports have ended, the unit switches back once again to the CD mode.Play function of MP3 dataDisplay of additional information – Press the button , the additional
information for the current title
is displayed on the display.
– You can select the additional information with the station buttons ,
which is displayed on the display.
Selective functions in CD modeDuring the CD play function the followin
g functions are displayed on the display:
RPT Selection of the mode for repeating the title.•
OFF
- Play function in continuous order;
MEDIA
A10

A2


A2
A12
A12A12
RADIOA11INFO
A12
sag.9.book Page 7 Wednesday, March 11, 2009 3:20 PM