manual radio set SKODA SUPERB 2009 2.G / (B6/3T) Swing Car Radio Manual

General information
2General informationEquipment overview
Control button − Switching radio on and off − Volume control (rotate) Menu control button - to call up the menu
of the parameter setting for radio or
CD player Button to activate the play function of audio sources Button to activate the radio modeButtons − fast station finding in radio mode − Select the track in the CD mode, fast forward/backward search in the CD mode Button − Display of radio text information − Display of additional information of MP3-CDs Button for adjusting the soundButton automatically stores the station Button to activate the reception of traffic reports CD caseCD - eject button Station keys − store and select the RDS station − CD selection − Enter code
Explanation of symbols * items of equipment which are marked in such a way are only installed as standard on certain models or are su
pplied as special equipment.
 End of a section.
 The section is continued on the next page.
Note
This Owner's Manual describes the range of fu
nctions at the time of going to press.
The illustrations can differ in minor
details from the version of your unit.
Important informationWarrantyThe equipment warranty terms and conditions also apply for new vehicles. After the expiration of the warranty, a piec
e of equipment in need of repair will be
replaced with a reconditioned, original item with spare part warranty. It is, however, a precondition that the housing has
not been damaged and no unauthorised
attempts have been made
to carry out repairs.
Note
Damage within the meaning of the warranty must not be the result of improper handling of the system or from unprofession
al repair attempts. It is also essential
that there is no external damage.Device operationThe unit should only be used, if the traffic situation permits it. The volume settings must be selected in
such a way that audible signals from the
outside, e.g. a Martins horn from utility
vehicles (police cars,
ambulances and fire
brigade), can be heard at all times.
A1A2A3
MEDIA
A4
RADIO
A5


A6
INFO
A7

A8
AS
A9
TP
A10A11A12sag.9.book Page 2 Wednesday, March 11, 2009 3:20 PM

General information
3
WARNING
Please concentrate fully at
all times on your driving! As the driver you are
fully responsible for road safety. Only use the functions of the radio in such a way that you are always in full co
ntrol of your vehicle in all traffic
situations!Using the displayCarefully handle the display because dent
s and scratches can occur through pres-
sure of the finger or contact with sharp objects. The display can be cleaned with a soft cl
oth and finger marks can be wiped away
with pure alcohol.
Note
Do not use solvent such as turpentine or
petrol as they will corrode the display
surface.Anti-theft protectionAnti-theft codingYour radio is equipped with a convenience co
ding. If the radio is being operated for
the first time, the safety code is not only
stored in the radio but also in the vehicle.
After disconnecting and reconnecting the batte
ry, first of all switch on the ignition
and then the radio. If you wish to install the radio in another vehicle, the safety code must be entered. In this case, please do not hesitate to co
ntact an authorised Škoda Service Partner
or a Škoda importer. As the unit only functions after entering the
safety code, this practically excludes its
use after a theft - a contribution to increased anti-theft safety.
Note
The code is stored in the instrument cluste
r. This ensures that it is automatically
decoded (convenience coding). Manual
input of the code is normally not
necessary.Enter code– Switch on the radio if the ignition is on. – Enter the safety code using the station keys - . – Confirm the safety code by pressing the station key .If you have confirmed a wrongly entered co
de, you can repeat once again the entire
process. If the code number is entered incorrectl
y for the second time, the unit will be
blocked for approx. one hour. It is possible
to enter again the safety code after one
hour has expired, when the unit and th
e ignition have been switched on.
The cycle - two attempts, blocked for
an hour - will continue to apply.
Basic settingSwitching the unit on and off– The system is switched on or off by briefly pressing the control button
.
If the key is pulled out of the ignition lock while the unit is switched on, the unit will switch off automatically. You can switch on
the unit again by pr
essing the control
button . If the ignition is switched of
f, the unit (discharge protection of the
vehicle battery) switches off automatically after approx. one hour. If you have switched off
the radio by withdrawing the ignition key, the radio
switches on again once the ignition is on.
1
4
6
A1A1
sag.9.book Page 3 Wednesday, March 11, 2009 3:20 PM

General information
5
REG Certain programs of the broadcasting companies are divided into regional programs at specific times. That is why in
individual regions the regional programs
of a station can broadcast different contents. First of all the unit attempts to set only alternative frequencies of the selected station. If the quality is however so low, that there is a risk of a “program loss”, the unit also accepts “related” frequencies.•
FIX
- the receiver switches to a regional “related” station, if the reception of the
current station could be interrupted;•
AUTO
- the receiver can access the re
gional “related” station unlimited.
BT-AUDIO* Enables a wireless transfer of MP3 da
ta from the telephone preinstallation.
Radio modeWaveband switch-over– Press the button for a
long period of time.
Your radio is equipped with FM and AM wavebands. They are divided in 6 memory levels, i.e. 3 levels for the FM waveband and 3 levels for the AM waveband. There are each 6 memory spaces available on these levels. Activation of the FM waveband The FM waveband is activated when pressing the station key
FM
. By briefly
pressing the button , you can select between the memory levels FM1, FM2 and FM3. Activation of the AM waveband The AM waveband is activated wh
en pressing the station key
AM
. By briefly
pressing the button , you can select between the memory levels AM1, AM2 and AM3.
The process of searching for and storing the radio stationsManual search – Search the frequency of the desire
d radio station by turning the menu
control button .
Store station – After selecting the radio station, hold the station key , on which it
should be stored until it briefly switches to mute and a brief signal sounds.
Automatic station finding with storing the radio stations – Press the button . An automatic station finding is started during
which the 6 stations with the strongest signal in the memory level FMAS and/or AMAS are stored.
When storing the radio stations on the station keys is finished, you can call up the desired radio station by pressing a station key .
Note
The stored radio stations of the curren
t waveband are updated and stored once
again in the memory level FMAS and/or AM
AS by repetitively pressing the button
.
Function SCANThe stations of a waveband
can be played briefly one after the other (for
ten seconds). – Press the menu control button , the radio searches automatically all
available stations of the current waveband.
– In order to call up the original radio station, press the station key
CANCEL
.
RADIO
A12
RADIO
A12
RADIO
A2
A12
AS
A12A12
AS
A2
A12
sag.9.book Page 5 Wednesday, March 11, 2009 3:20 PM