belt SSANGYONG RODIUS 2005 User Guide

0-10
RODIUS 2005.07
8810-01
AIR BAG SYSTEM
11) Wiring Harness Connectors
If the sensing and diagnostic module (SDM) electrical connector is not attached properly, a built
in shorting bar will connect the wire from airbag warning lamp with the SDM ground wire. This
turns on the AIRBAG indicator.
To prevent deployment during servicing, additional shorting bars are located in following
locations:
Driver airbag module connector
Passenger airbag module connector
Driver and passenger side airbag module connector
SDM wiring harness connector
Contact coil connector to airbag wiring harness ·
·
·
·
·
The shorting bar is only a backup safety device. Always disable the supplemental restraints
system (SRS) before beginning any service procedure.
12) Belt Pretensioner
The belt pretensioner enables to retract the driver and the passenger seat belt webbing to
reduce any personal impact when accounted a frontal collision.

0-2
RODIUS 2005.07
7410-01
SEAT
Belt type buckle
Front seat belt
7410-01SEAT
1. SEAT OVERVIEW
Fixed type buckle
Front seat Driver’s
Passenger’s

0-6
RODIUS 2005.07
7410-01
SEAT
▶ Rear 1st row (3 point + 2 point)
▶ Rear 2nd row (3 point + 2 point)
▶ Rear 3rd row (3 point + 2 point)
▶ Front Seat Belt (3 point)
2. COMPONENTS OF SEAT BELT
1) 11 Passengers

0-7
SEAT
RODIUS 2005.07
7410-01
2) 9 Passengers
▶ Front Seat Belt (3 point)
▶ Rear 1st row (3 point)
▶ Rear 2nd row (3 point)
▶ Rear 3rd row (3 point + 2 point)

0-8
RODIUS 2005.07
7410-01
SEAT
3) 7 Passengers
▶ Front Seat Belt (3 point)
▶ Rear 2nd row (3 point + 2 point)
▶ Rear 1st row (3 point)