display SUBARU CROSSTREK 2017 1.G Multimedia System Manual

Bluetooth® SETTINGS
187
SETTINGS
7
No. Information
&RPSDWLELOLW\SUR¿OHRIWKH%OXHWRRWKGHYLFH
Select to reset all setup items.
NOTE
OIf 2 Bluetooth devices have been registered with the same
device name, the devices can be distinguished referring to the
device’s address.
ODepending on the type of phone, some information may not be
displayed.
CHANGING A DEVICE NAME
1. Select Device Name (Device Name).
2. Enter the name and then select OK (OK).
NOTE
OEven if the device name is changed, the name registered in your
Bluetooth device does not change.
SETTING AUDIO DEVICE CONNECTION METHOD
1. Select Connect Audio Device from (Connect Audio
Device from).
2. Select the desired connection method.

”
Vehicle (Vehicle): Select to connect the audio
system to the audio device.

”
Device (Device): Select to connect the audio device
to the audio system.

”Depending on the audio device, the “Vehicle
(Vehicle)” or “Device (Device)” connection method
may be best. As such, refer to the manual that comes
with the audio device.

”To reset the connection method, select
Default
(Default).

Bluetooth® SETTINGS
188
“System Settings (System Settings)”
SCREEN
<0037004b004800030025004f005800480057005200520057004b00030056004800570057004c0051004a00560003004600440051000300450048000300460052005100bf0055005000480047000300440051004700030046004b00440051004a0048004700
11>
1. Display the “Bluetooth Settings (Bluetooth Settings)”
VFUHHQ
:3
2. Select System Settings (System Settings).
3. Select the desired item to be set.
No. Information Page
Select to set Bluetooth connection on/off. 189
Displays system name. Can be changed to a
desired name.189
PIN-code used when the Bluetooth device
was registered. Can be changed to a desired
code.189
Device address is unique to the device and
cannot be changed.-
Select to set the phone connection status
display on/off.-
Select to set the connection status display of
the audio device on/off.-
&RPSDWLELOLW\SUR¿OHRIWKHV\VWHPGHYLFH-
Select to reset all setup items. -

OTHER SETTINGS
191
SETTINGS
7
No. Function
*16HOHFWWRFKDQJHWKHYHKLFOHFORFNVHWWLQJV
:3
Select to change the language.
Select to change the unit for measuring distance.
Select to turn the beep sound on/off.
Select to change the button and screen color.
Select to change the keyboard layout.
Select to turn on/off the setting that returns the display
to the split screen automatically after 20 seconds when
a screen other than the split screen is displayed.
Select to turn the animation function on/off.
6HOHFWWRFXVWRPL]HWKHVFUHHQRIILPDJH
:3
6HOHFWWRGHOHWHSHUVRQDOGDWD
:3
Select to set the connected device when using aha.
Select
USB (USB) when using an iPhone, and then
select
Bluetooth (Bluetooth) when using Android
devices.
No. Function
Select to set the connected device when using
Pandora*2. Select USB (USB) when using an iPhone,
and then select
Bluetooth (Bluetooth) when using
Android devices.
Select to update the Gracenote® database. For details,
contact your SUBARU dealer.
Select to display the software information. Notices
related to third party software used in this product are
enlisted. (This includes instructions for obtaining such
software, where applicable.)
Select to set the back camera delay control on/off.
When set to on, the back camera image displays for
approximately 6 seconds after moving the shift lever/
select lever “R” to any position other than “R”.
The display disappears when the shift lever/select lever
is moved to “P”, or when the vehicle speed reaches
approximately 5 mph (8 km/h) or faster.
Select to reset all setup items.
*1: With navigation function
*2: Pandora is available in the United States, Australia, and New Zealand.

OTHER SETTINGS
192
CLOCK SETTINGS (WITH NAVIGATION
FUNCTION)
Used to set the auto update setting for time zones, daylight
saving time and automatic time adjustment on/off.
1. Display the “General Settings (General Settings)”
VFUHHQ
:3
2. Select Clock (Clock).
3. Select the items to be set.
No. Function
6HOHFWWRFKDQJHWKHWLPH]RQH
:3
Select to set daylight saving time on/off or to auto.
When set to auto, the daylight saving time setting
automatically turns on or off based on the current
location information.
4. Select OK (OK).
QSETTING THE TIME ZONE
1. Select Time Zone (Time Zone).
2. Select the desired time zone.
CUSTOMIZING THE SCREEN OFF IMAGES
When the screen is turned off, the desired set image
can be displayed as the screen off image. Images
can be copied from a USB memory or SD card*.
A USB memory or SD card* must be connected when
HGLWLQJVFUHHQRIILPDJHV
:3
*: With navigation function

OTHER SETTINGS
193
SETTINGS
7
NOTE
OWhen saving the images to a USB or SD card* name the folder
that the screen off image is saved to “Image”. If this folder name
is not used, the system cannot download the images. (The folder
name is case sensitive.)
*: With navigation function O<002c00500044004a0048000300bf004f0048005600030056004400590048004700030057005200030057004b0048000300500044005300030036002700030046004400550047000300460044005100510052005700030045004800030053004f0044005c00
48004700110003>
QTRANSFERRING IMAGES
1. Select .
2. Select SETTINGS (SETTINGS).
3. Select General (General).
4. Select Customize Screen Off Image (Customize
Screen Off Image).
5. Select the device that the image is stored on.
6. Select Copy from [device] (Copy from [device]).
7. Select the desired images from the list and then select
Copy (Copy).

”The selected image is displayed on the right side
RI WKH VFUHHQ ,I WKH VHOHFWHG LPDJH

OTHER SETTINGS
194
QSETTINGS THE SCREEN OFF IMAGES
1. Display the “General Settings (General Settings)”
VFUHHQ
:3
2. Select Customize Screen Off Image (Customize
Screen Off Image).
3. Select the device that the image is stored on.
4. Select Select Images (Select Images).
5. Select the desired image.
6. Select OK (OK).
QDELETING TRANSFERRED IMAGES
1. Display the “General Settings (General Settings)”
VFUHHQ
:3
2. Select Customize Screen Off Image (Customize
Screen Off Image).
3. Select the device that the image is stored on.
4. Select Delete Images (Delete Images).
5. Select the images to be deleted and then select Delete
(Delete).
6. Select Yes <HV ZKHQ WKH FRQ

OTHER SETTINGS
195
SETTINGS
7
DELETING PERSONAL DATA
1. Display the “General Settings (General Settings)”
VFUHHQ
:3
2. Select Delete Personal Data (Delete Personal Data).
3. Select Delete (Delete).
4. Select Yes <HV ZKHQ WKH FRQ

OTHER SETTINGS
196
VOICE SETTINGS
Voice volume, etc. can be set.
1. Select .
2. Select SETTINGS (SETTINGS).
3. Select Voice (Voice).
4. Select the items to be set.
NOTE
O“Voice Settings (Voice Settings)” screen can also be displayed
IURPWKHYRLFHUHFRJQLWLRQWRSVFUHHQ
:3
VOICE SETTINGS SCREEN
No. Function
Select to adjust the volume of voice guidance.
Select to mute/unmute the navigation voice guidance.
Select to set the voice recognition prompts.
Select to reset all setup items.
NOTE
OThe volume can even be adjusted by turning the “POWER/
VOLUME” knob or by pressing the “+/-” steering switches

:3GXULQJYRLFHJXLGDQFH

BASIC OPERATION
198
BASIC OPERATION
QUICK REFERENCE
MAP SCREEN
To display this screen, select , or select and
then select
MAP (MAP).
No. Name Information/Function Page
2D North-up, 2D
heading-up or
3D symbolSelect to change the map
display mode between 2D
north-up, 2D heading-up
or 3D. In 3D map, only
a heading-up view is
available.205
*
7UDI

BASIC OPERATION
199
NAVIGATION SYSTEM
8
No. Name Information/Function Page
*Highway
informationSelect to display the
highway information.224
Speed Limit
indicatorDisplays the speed limit for
the road being driven on.-
*: The default setting is not displayed, and can be displayed from “Display
<0052005100030030004400530003000b0027004c00560053004f0044005c0003005200510003003000440053000c00b40003004c0051000300b300300044005300030036004800570057004c0051004a00560003000b003000440053000300360048005700
57004c0051004a0056000c00b400110003000b013a0033>
NOTE
OAn “Unable to read the map SD data. Check the map SD. If
necessary, consult your dealer.” message appears if the map SD
card is not inserted, or if an SD card containing no map data is
inserted.
MAP OPERATIONS
You can touch a position on the map, and then check that
position during navigation. The map’s current position
tracking function stops (the car marker (a blue arrow by
GHIDXOW LV QRW