SUBARU LEGACY 1996 Service Repair Manual
Page 1441 of 2890
B5M0239AB5M0240A
B5M0241AB5M0242A
B5M0243AB5M0244A
B5M0245AB5M0246A
13
5-1SERVICE DATA
2. Body Datum Points
Page 1442 of 2890
B5M0247AB5M0248A
B5M0249A
G5M0122
3. Datum Dimensions
Use a tram tracking gauge to measure all dimensions. If a
measuring tape is used, be extremely careful because it
tends to deflect or twist, which results in a false reading.
NOTE:
A suffix character“R”or“L”refers to the right or the left.
All dimensions refer to the distance between the centers
of holes measured in a straight line.
Each dimension indicates a projected dimension
between hole centers.
14
5-1SERVICE DATA
2. Body Datum Points - 3. Datum Dimensions
Page 1443 of 2890
B5M0247AB5M0248A
B5M0249A
G5M0122
3. Datum Dimensions
Use a tram tracking gauge to measure all dimensions. If a
measuring tape is used, be extremely careful because it
tends to deflect or twist, which results in a false reading.
NOTE:
A suffix character“R”or“L”refers to the right or the left.
All dimensions refer to the distance between the centers
of holes measured in a straight line.
Each dimension indicates a projected dimension
between hole centers.
14
5-1SERVICE DATA
2. Body Datum Points - 3. Datum Dimensions
Page 1444 of 2890
1. FRONT STRUCTURE
B5M0320A
Unit: mm (in)
15
5-1SERVICE DATA
3. Datum Dimensions
Page 1445 of 2890
2. CENTER STRUCTURE
Unit: mm (in)
B5M0251A
Unit: mm (in)
B5M0393A
16
5-1SERVICE DATA
3. Datum Dimensions
Page 1446 of 2890
Unit: mm (in)
B5M0253A
17
5-1SERVICE DATA
3. Datum Dimensions
Page 1447 of 2890
3. FRONT WINDSHIELD AND REAR WINDOW
B5M0254A
Unit: mm (in)
18
5-1SERVICE DATA
3. Datum Dimensions
Page 1448 of 2890
4. DOORS
B5M0321A
Unit: mm (in)
19
5-1SERVICE DATA
3. Datum Dimensions
Page 1449 of 2890
5. TRUNK LID AND REAR GATE
B5M0255A
Unit: mm (in)
20
5-1SERVICE DATA
3. Datum Dimensions
Page 1450 of 2890
6. COMPARTMENT
B5M0256A
Unit: mm (in)
21
5-1SERVICE DATA
3. Datum Dimensions